Abstract
Lithium-added nickel catalysts on alumina were prepared for CO2 reforming of methane by two methods, precipitation and impregnation. Performances of the catalysts were investigated by TG, CO-adsorption and SEM analysis. The catalyst with ratio of Li/Ni=1.0 prepared by precipitation method has high nickel dispersion, catalytic activity and stability for CO2 reforming of methane.
Similar content being viewed by others
Abbreviations
- F CH4 :
-
flow rate of methane (mol/s)
- F CO2 :
-
flow rate of carbon dioxide (mol/s)
- −r CH4 :
-
reaction rate of CO2 reforming of methane (mol/(s kg))
- S Ni :
-
nickel surface area (m2/kg)
- t :
-
reaction time (s)
- T :
-
reaction temperature (K)
- T CO :
-
CO adsorption temperature (K)
- W r :
-
catalyst weight in the reduced state (kg)
- °W :
-
change in catalyst weight (kg)
References
S. Michel:Hydrocarbon Processing, April, 37 (1989).
S.C. Tsang, J.B. Claridge, M.L.H. Green:Catal. Today,23, 3 (1995).
A.M. Gadalla, B. Bower:Chem. Eng. Sci.,43, 3049 (1988).
T. Horiuchi, K. Sakuma, T. Fukui, Y. Kubo, T. Osaki, T. Mori:Appl. Catal.,144, 111 (1996).
K. Otsuka, M. Hatano:Shokubai (Catalyst),29, 46 (1987).
A. Takano, T. Tagawa, S. Goto:J. Chem. Eng. Jpn.,27, 727 (1994).
A. Takano, T. Tagawa, S. Goto:Kagaku Kogaku Ronbunshu,21, 1154 (1995).
M. Ito, T. Tagawa, S. Goto:Appl. Catal., in press.
M. Ito, T. Tagawa, S. Goto:Appl. Catal.,177, 15 (1999).
A. Takano, T. Tagawa, S. Goto:Sekiyu Gakkaishi,39, 144 (1996).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ito, M., Tagawa, T. & Goto, S. Comparison of two preparation methods of supported Li−Ni catalyst on alumina for selective oxidation of methane. React Kinet Catal Lett 68, 277–284 (1999). https://doi.org/10.1007/BF02475513
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02475513