Online first articles
Articles not assigned to an issue 57 articles
-
-
Thermohydraulic performance of winglets inside a rectangular microchannel
Authors
- Tarang Agarwal
- Content type: Original Article
- Published: 23 April 2024
-
14th Heat exchanger fouling and cleaning conference
Authors
- Andrea Luke
- Content type: Guest Editorial
- Published: 22 April 2024
-
New water-stainless steel rod-plate heat pipe: model and experiments
Authors (first, second and last of 4)
- Elvis Falcão de Araújo
- Juan Pablo Flórez Mera
- Márcia Barbosa Henriques Mantelli
- Content type: Original Article
- Published: 15 April 2024
-
Pool boiling heat transfer performance of low-GWP refrigerant R-513A on smooth tube
Authors
- Abhishek Kumar
- Shou-Yin Yang
- Content type: Original Article
- Published: 15 April 2024
-
Experimental analysis of a heat pipe-assisted flexible heat transfer device
Authors
- Kannan Pandi
- V. M. Jaganathan
- Content type: Original Article
- Published: 09 April 2024
-
Transient heat flux assessment using a platinum thin film sensor for short-duration applications
Authors (first, second and last of 5)
- Sumedh Dongare
- Ravi K. Peetala
- Akash Jadhav
- Content type: Original Article
- Published: 08 April 2024
-
General correlation of two-phase frictional pressure drop inside smooth tubes
Authors
- I Wayan Sugita
- Afdhal Kurniawan Mainil
- Akio Miyara
- Content type: Original Article
- Published: 04 April 2024
-
Performance prediction and evaluation of heat pipe with hexagonal perforated twisted tape inserts
Authors
- Snehal Vasant Kadbhane
- Dilip R. Pangavhane
- Content type: Original Article
- Published: 20 March 2024
-
Correction to: Thermo‑physical characterizations and simulation study of an energy‑efficient building material: clay stabilized by wood ashes or crushed waste from traditional pottery
Authors (first, second and last of 5)
- Said Bajji
- Younes Bahammou
- Youssef Naimi
- Content type: Correction
- Published: 14 March 2024
-
Exploring thermal dynamics of polyaniline-modified paraffin wax phase change material with varied PANI loadings (1–4% wt.)
Authors (first, second and last of 10)
- Emeema Janumala
- Murali Govindarajan
- Manzoore Elahi M. Soudagar
- Content type: Original Article
- Published: 11 March 2024
-
Conjoint effect of turbulator and Al2O3 nanofluids on DPHEs thermal performance: Experimental study
Authors
- Shankara Murthy H M
- Ramakrishna N. Hegde
- Niranjana Rai
- Content type: Original Article
- Published: 08 March 2024
-
Study of a novel solar-driven internally cooled liquid desiccant system for hot and humid climates
Authors
- Kalpana
- Sudhakar Subudhi
- Content type: Original Article
- Published: 08 March 2024
-
Thermo-physical characterizations and simulation study of an energy-efficient building material: Clay stabilized by wood ashes or crushed waste from traditional pottery
Authors (first, second and last of 5)
- Said Bajji
- Younes Bahammou
- Youssef Naimi
- Content type: Original Article
- Published: 16 January 2024
-
14th Heat Exchanger Fouling and Cleaning Conference - 2022, Wagrain, Austria
Authors
- Hans U. Zettler
- Edward M. Ishiyama
- Content type: Guest Editorial
- Published: 07 October 2023
-
Generation of experimental data for model training to optimize fouling prediction
Authors
- Niklas Jarmatz
- Wolfgang Augustin
- Stephan Scholl
- Content type: Original Article
- Open Access
- Published: 25 July 2023
-
System for automated monitoring of local soil removal during cleaning in closed food processing lines with a quartz crystal sensor
Authors (first, second and last of 4)
- S. Gottschall
- R. Murcek
- M. Mauermann
- Content type: Original Article
- Open Access
- Published: 19 July 2023
-
Optimizing the macrostructure of 3D-printed pipe surfaces to improve cleanability
Authors (first, second and last of 5)
- Tobias Hanisch
- Matthias Joppa
- Marc Mauermann
- Content type: Original Article
- Open Access
- Published: 13 July 2023
-
Corrosion fouling during crude oil flow on a heated surface: Effects of temperature, shear and material of construction
Authors (first, second and last of 5)
- Pragya Singh
- Srinivas Krishnaswamy
- Jaya Rawat
- Content type: Original Article
- Published: 13 July 2023
-
Numerical investigation of tubeside maldistribution in shell-and-tube heat exchangers
Authors (first, second and last of 4)
- Richard Schab
- Alexander Kutschabsky
- Michael Beckmann
- Content type: Original Article
- Open Access
- Published: 07 July 2023
-
Influence of rheological properties and pull-off forces of native and modified starches on cleaning in plane channel flow
Authors (first, second and last of 6)
- Sebastian Kricke
- Christiane Berger
- Jens-Peter Majschak
- Content type: Original Article
- Open Access
- Published: 07 July 2023
-
Role of zinc in bulk precipitation from the steaming process of potable water
Authors
- Amthal Al-Gailani
- Martin J. Taylor
- Richard Barker
- Content type: Original Article
- Open Access
- Published: 03 July 2023
-
Diffusive mass transfer and protein removal in the alkaline cleaning of a jellylike whey protein fouling layer
Authors (first, second and last of 4)
- H. Wiese
- H. Geißler
- S. Scholl
- Content type: Original Article
- Open Access
- Published: 01 July 2023
-
Incorporation of fouling deposit measurements in crude oil fouling testing and data analysis
Authors
- Aaron D. Smith
- Emmanuel Hitimana
- Content type: Original Article
- Published: 30 June 2023
-
CFD modelling of an initial powdery layer on cooled tubular surfaces
Authors
- Jiřà Strouhal
- Tomáš Juřena
- Zdeněk Jegla
- Content type: Original Article
- Published: 29 June 2023
-
Numerical modeling of a cohesively separating soil layer in consideration of locally varying soil distribution
Authors (first, second and last of 4)
- Christian Golla
- Hannes Köhler
- Frank Rüdiger
- Content type: Original Article
- Open Access
- Published: 28 June 2023
-
The potential of thermally conductive polymer composites regarding crystallization fouling mitigation
Authors (first, second and last of 5)
- H. Kiepfer
- P. Stannek
- H.-J. Bart
- Content type: Original Article
- Open Access
- Published: 28 June 2023
-
Software-guided clamp-on power ultrasound solution for fouling mitigation in tubular heat exchangers
Authors
- P. Moilanen
- T. Rauhala
- S. Ahmadzai
- Content type: Original Article
- Published: 26 June 2023
-
Determining the fouling tendency of different feedstocks in the Fouling Assessment Setup
Authors (first, second and last of 6)
- L. dos S. Vargette
- N. D. Ristic
- K. M. Van Geem
- Content type: Original Article
- Published: 26 June 2023
-
A modified zonal method to solve coupled conduction-radiation physics within highly porous large scale digitized cellular porous materials
Authors (first, second and last of 5)
- Atin Kumar
- Jérôme Vicente
- Benoit Rousseau
- Content type: Original Article
- Published: 09 February 2023
-
On an averaged energy-balance method for the analysis of wavy microchannels
Authors (first, second and last of 4)
- Roxana Durantes
- Justin Moon
- Arturo Pacheco-Vega
- Content type: Original
- Published: 07 January 2023
-
Investigation on the structure function of an electronic packaging to verify detailed thermal model assumptions
Authors (first, second and last of 5)
- Quentin Dupuis
- Valentin Bissuel
- Minh-Nhat Nguyen
- Content type: Original
- Published: 03 January 2023
-
Evaluation of stability, viscosity and electrical conductivity of [C2mim][DCA] based ionanocolloids
Authors
- J. Pinto
- E. Fabre
- S. M. S. Murshed
- Content type: Original Article
- Published: 05 December 2022
-
Effect of input parameters on energy requirements of phase change material integrated local heating system: a case study
Authors
- Pushpendra Kumar Shukla
- P. Anil Kishan
- Content type: Original Article
- Published: 28 November 2022
-
Sensitivity analysis of a combined Free Piston Stirling Engine-Permanent Magnet Linear Synchronous Machine model
Authors (first, second and last of 4)
- M. Majidniya
- T. Boileau
- M. Zandi
- Content type: Original Article
- Published: 24 November 2022
-
Fire behaviour of a Carbon/Nomex honeycomb sandwich composite used in aircraft interiors as ceiling panel
Authors (first, second and last of 4)
- V. Papadogianni
- A. Romeos
- T. Panidis
- Content type: Original Contribution
- Open Access
- Published: 10 November 2022
-
Influence of working conditions on the condensation efficiency of the prototype condensation hood
Authors (first, second and last of 5)
- Arkadiusz Ryfa
- Mieszko Tokarski
- Andrzej J. Nowak
- Content type: Original Article
- Open Access
- Published: 25 October 2022
-
The use of hot film sensors for the heat flux measurement of impinging jet flows: A comparison of postprocessing methods
Authors
- Paula Murphy
- Tim Persoons
- Seamus O’Shaughnessy
- Content type: Original
- Published: 24 September 2022
-
A new method for thermal conductivity measurement: application to complex heterogeneous materials used in thermal batteries
Authors (first, second and last of 5)
- T Ledevin
- L Courty
- L Faget
- Content type: Original
- Published: 16 September 2022
-
Application of RC delay time for thermal non-destructive characterization
Authors
- Priyanka Jena
- Rajesh Gupta
- Content type: Original
- Published: 02 September 2022
-
An experimental evaluation of thermoelectric generator performance under cyclic heating regimes
Authors (first, second and last of 4)
- N. P. Williams
- J. Power
- S. M. O’Shaughnessy
- Content type: Original
- Open Access
- Published: 01 September 2022
-
Conceptual design of an innovative gas–gas ceramic compact heat exchanger suitable for high temperature applications
Authors (first, second and last of 6)
- Simone A. Zavattoni
- Luca Cornolti
- Maurizio C. Barbato
- Content type: Original
- Open Access
- Published: 30 August 2022
-
Hydro - thermal interactions of a ferrofluid in a non - uniform magnetic field
Authors
- Shubham Dalvi
- Theo H. van der Meer
- Mina Shahi
- Content type: Original
- Open Access
- Published: 23 August 2022
-
In-line measurement of absorbed solar irradiance using a volumetric collector with SWCNH nanofluid
Authors (first, second and last of 5)
- Arianna Berto
- Emanuele Zanetti
- Davide Del Col
- Content type: Original
- Open Access
- Published: 22 August 2022
-
Nucleate pool boiling heat transfer and critical heat flux of FK-649 on an inverter power module
Authors (first, second and last of 4)
- Ilya T’Jollyn
- Jasper Nonneman
- Michel De Paepe
- Content type: Original
- Published: 17 August 2022
-
Numerical modeling of heat and mass transfer in an adsorbed natural gas storage tank with monolithic active carbon during charging and discharging processes
Authors (first, second and last of 6)
- E. M. Strizhenov
- S. S. Chugaev
- A. A. Zherdev
- Content type: Original
- Published: 08 August 2022
-
CFD of roughness effects on laminar heat transfer applied to additive manufactured minichannels
Authors
- Mohammadreza Kadivar
- David Tormey
- Gerard McGranaghan
- Content type: Original
- Open Access
- Published: 04 August 2022
-
Thermal conditions for the formation of self-assembled cluster of droplets over the water surface and diversity of levitating droplet clusters
Authors (first, second and last of 6)
- Alexander A. Fedorets
- Leonid A. Dombrovsky
- Michael Nosonovsky
- Content type: Original Article
- Published: 28 June 2022
-
A systematic approach to formulate numerical kinetics for furnishing materials fire simulation with validation procedure using cone/FT-IR data
Authors (first, second and last of 8)
- Luzhe Liu
- Timothy Bo Yuan Chen
- Guan Heng Yeoh
- Content type: Original Article
- Published: 25 October 2021
-
Numerical study of nanocomposite phase change material-based heat sink for the passive cooling of electronic components
Authors (first, second and last of 6)
- Adeel Arshad
- Mark Jabbal
- Yuying Yan
- Content type: Original
- Published: 12 May 2021
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more