1. Editorial

   • Basil R. Marple
   • Arvind Agarwal
   • Ghislain Montavon

   Editorial 12 November 2010 Pages: 1 - 2

2. Improving Powder Injection in Plasma Spraying by Optical Diagnostics of the Plasma and Particle Characterization

   • Georg Mauer
   • Robert Vaßen
   • Jochen Schein

   Peer Reviewed 02 November 2010 Pages: 3 - 11

   

3. Velocity Diagnostics for Gas Velocity Distributions in Cold Gas and Plasma Spraying Using Non-Resonant Laser Scattering

   • Sebastian Lange
   • Marco Sieber
   • Christian J. Kähler

   Peer Reviewed 15 October 2010 Pages: 12 - 20

   

4. Modeling of the Plasma Flow and Anode Region Inside a Direct Current Plasma Gun

   • Rodolphe Bolot
   • Christian Coddet
   • Dominique Billières

   Peer Reviewed 17 October 2010 Pages: 21 - 27

   

5. Improvement of Plasma Spray Torch Stability by Controlling Pressure and Voltage Dynamic Coupling

   • V. Rat
   • J. F. Coudert

   Peer Reviewed 14 October 2010 Pages: 28 - 38

   

6. Predicting the Thermal Conductivity of AlSi/Polyester Abradable Coatings: Effects of the Numerical Method

   • Rodolphe Bolot
   • Jean-Louis Seichepine
   • Christian Coddet

   Peer Reviewed 12 November 2010 Pages: 39 - 47

   

7. Effect of Substrate Temperature and Ambient Pressure on Heat Transfer at Interface Between Molten Droplet and Substrate Surface

   • M. Fukumoto
   • K. Yang
   • M. Yamada

   Peer Reviewed 04 August 2010 Pages: 48 - 58

   

8. Flattening and Cooling of Millimeter- and Micrometer-Sized Alumina Drops

   • S. Goutier
   • M. Vardelle
   • P. Fauchais

   Peer Reviewed 11 November 2010 Pages: 59 - 67

   

9. Influence of the Surface State on the Adherence of the Coating: Case of an Alumina Coating Plasma Sprayed on SiC Composites

   • S. Costil
   • S. Lukat
   • C. Coddet

   Peer Reviewed 17 September 2010 Pages: 68 - 75

   

10. Relationships Between Process Parameters, Microstructure, and Adhesion Strength of HVOF Sprayed IN718 Coatings

    • Christophe Lyphout
    • Per Nylén
    • Lars Östergren

    Peer Reviewed 02 September 2010 Pages: 76 - 82

    

11. Phase Composition and Microstructural Responses of Graded Mullite/YSZ Coatings Under Water Vapor Environments

    • E. Garcia
    • J. Mesquita-Guimarães
    • R. S. Lima

    Peer Reviewed 13 November 2010 Pages: 83 - 91

    

12. Elastic Modulus Evolution and Behavior of Si/Mullite/BSAS-Based Environmental Barrier Coatings Exposed to High Temperature in Water Vapor Environment

    • C. V. Cojocaru
    • S. E. Kruger
    • R. S. Lima

    Peer Reviewed 03 December 2010 Pages: 92 - 99

    

13. Mechanical Behavior of Air Plasma-Sprayed YSZ Functionally Graded Mullite Coatings Investigated via Instrumented Indentation

    • C. V. Cojocaru
    • Y. Wang
    • M. I. Osendi

    Peer Reviewed 13 November 2010 Pages: 100 - 107

    

14. Next Generation Thermal Barrier Coatings for the Gas Turbine Industry

    • Nicholas Curry
    • Nicolaie Markocsan
    • Mitch Dorfman

    Peer Reviewed 17 November 2010 Pages: 108 - 115

    

15. Columnar-Structured Thermal Barrier Coatings (TBCs) by Thin Film Low-Pressure Plasma Spraying (LPPS-TF)

    • Andreas Hospach
    • Georg Mauer
    • Detlev Stöver

    Peer Reviewed 04 September 2010 Pages: 116 - 120

    

16. Effect of Chemical Compositions and Surface Morphologies of MCrAlY Coating on Its Isothermal Oxidation Behavior

    • Yong Li
    • Chang-Jiu Li
    • Guan-Jun Yang

    Peer Reviewed 13 November 2010 Pages: 121 - 131

    

17. The Oxidation Behavior of TBC with Cold Spray CoNiCrAlY Bond Coat

    • W. R. Chen
    • E. Irissou
    • B. R. Marple

    Peer Reviewed 17 November 2010 Pages: 132 - 138

    

18. High Temperature Mechanical Behavior of UHTC Coatings for Thermal Protection of Re-Entry Vehicles

    • G. Pulci
    • M. Tului
    • T. Valente

    Peer Reviewed 19 November 2010 Pages: 139 - 144

    

19. Preparation of Nanocomposite GDC/LSCF Cathode Material for IT-SOFC by Induction Plasma Spraying

    • Yan Shen
    • Veronica Alexandra B. Almeida
    • François Gitzhofer

    Peer Reviewed 19 November 2010 Pages: 145 - 153

    

20. The Structure and Properties of Plasma Sprayed Iron Oxide Doped Manganese Cobalt Oxide Spinel Coatings for SOFC Metallic Interconnectors

    • Jouni Puranen
    • Juha Lagerbom
    • Petri Vuoristo

    Peer Reviewed 18 November 2010 Pages: 154 - 159

    

21. Influence of Deposition Temperature on the Microstructures and Properties of Plasma-Sprayed Al₂O₃ Coatings

    • Shun Hao
    • Chang-Jiu Li
    • Guan-Jun Yang

    Peer Reviewed 12 November 2010 Pages: 160 - 169

    

22. Structural, Mechanical and Erosion Properties of Yttrium Oxide Coatings by Axial Suspension Plasma Spraying for Electronics Applications

    • Junya Kitamura
    • Zhaolin Tang
    • Alan Burgess

    Peer Reviewed 12 November 2010 Pages: 170 - 185

    

23. Design of Experiment Analysis of the Sulzer Metco DJ High Velocity Oxy-Fuel Coating of Hydroxyapatite for Orthopedic Applications

    • S. Hasan
    • J. Stokes

    Peer Reviewed 17 October 2010 Pages: 186 - 194

    

24. Comparative Study of the Electrical Properties and Characteristics of Thermally Sprayed Alumina and Spinel Coatings

    • Filofteia-Laura Toma
    • Stefan Scheitz
    • Sven Thiele

    Peer Reviewed 12 November 2010 Pages: 195 - 204

    

25. Influence of NH₄Cl Powder Addition for Fabrication of Aluminum Nitride Coating in Reactive Atmospheric Plasma Spray Process

    • Mohammed Shahien
    • Motohiro Yamada
    • Masahiro Fukumoto

    Peer Reviewed 12 November 2010 Pages: 205 - 212

    

26. Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings

    • Wilson Wong
    • Eric Irissou
    • Stephen Yue

    Peer Reviewed Open access 02 November 2010 Pages: 213 - 226

    

27. Characterization of High-Temperature Abrasive Wear of Cold-Sprayed FeAl Intermetallic Compound Coating

    • Chang-Jiu Li
    • Hong-Tao Wang
    • Chong-Gao Bao

    Peer Reviewed 04 September 2010 Pages: 227 - 233

    

28. Influence of Impact Angle and Gas Temperature on Mechanical Properties of Titanium Cold Spray Deposits

    • K. Binder
    • J. Gottschalk
    • T. Klassen

    Peer Reviewed 07 October 2010 Pages: 234 - 242

    

29. Influence of Pre-Heated Al 6061 Substrate Temperature on the Residual Stresses of Multipass Al Coatings Deposited by Cold Spray

    • Silvano Rech
    • Andrea Trentin
    • Mario Guagliano

    Peer Reviewed 12 November 2010 Pages: 243 - 251

    

30. Investigation of Impact Behavior of Cold-Sprayed Large Annealed Copper Particles and Characterization of Coatings

    • Wenya Li
    • Xueping Guo
    • Christian Coddet

    Peer Reviewed 28 July 2010 Pages: 252 - 259

    

31. Corrosion Behavior of Cold Sprayed Titanium Coatings and Free Standing Deposits

    • T. Hussain
    • D. G. McCartney
    • T. Marrocco

    Peer Reviewed 11 August 2010 Pages: 260 - 274

    

32. Consolidation of Al₂O₃/Al Nanocomposite Powder by Cold Spray

    • Dominique Poirier
    • Jean-Gabriel Legoux
    • Raynald Gauvin

    Peer Reviewed 12 November 2010 Pages: 275 - 284

    

33. Effect of Ceramic Particle Velocity on Cold Spray Deposition of Metal-Ceramic Coatings

    • A. Sova
    • V. F. Kosarev
    • I. Smurov

    Peer Reviewed 22 October 2010 Pages: 285 - 291

    

34. Formation of Cold-Sprayed Ceramic Titanium Dioxide Layers on Metal Surfaces

    • J.-O. Kliemann
    • H. Gutzmann
    • T. Klassen

    Peer Reviewed Open access 21 October 2010 Pages: 292 - 298

    

35. Metallization of Thin Al₂O₃ Layers in Power Electronics Using Cold Gas Spraying

    • Kerstin-Raffaela Donner
    • Frank Gaertner
    • Thomas Klassen

    Peer Reviewed 21 October 2010 Pages: 299 - 306

    

36. Effect of Using Liquid Feedstock in a High Pressure Cold Spray Nozzle

    • E. Farvardin
    • O. Stier
    • A. Dolatabadi

    Peer Reviewed 17 November 2010 Pages: 307 - 316

    

37. Analysis of the Mechanical Properties of an Arc Sprayed WC-FeCSiMn Coating: Compression, Bending, and Tension Behavior

    • W. Tillmann
    • J. Nebel

    Peer Reviewed 02 November 2010 Pages: 317 - 327

    

38. Analysis of the Mechanical Properties of an Arc-Sprayed WC-FeCSiMn Coating: Nanoindentation and Simulation

    • W. Tillmann
    • B. Klusemann
    • B. Svendsen

    Peer Reviewed 07 October 2010 Pages: 328 - 335

    

39. Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray and In Situ Laser Remelting Process

    • Nicolas Serres
    • Françoise Hlawka
    • Frédérique Machi

    Peer Reviewed 12 November 2010 Pages: 336 - 343

    

40. Microstructure and Electrochemical Behavior of Fe-Based Amorphous Metallic Coatings Fabricated by Atmospheric Plasma Spraying

    • Z. Zhou
    • L. Wang
    • Y. B. Liu

    Peer Reviewed 30 October 2010 Pages: 344 - 350

    

41. Characteristics of Cu Film Deposited Using VLPPS

    • N. Zhang
    • F. Sun
    • C. Coddet

    Peer Reviewed 06 August 2010 Pages: 351 - 357

    

42. Thermophysical and Microstructural Studies on Thermally Sprayed Tungsten Carbide-Cobalt Coatings

    • Sven Thiele
    • Kerstin Sempf
    • Jörg Spatzier

    Peer Reviewed 16 October 2010 Pages: 358 - 365

    

43. Structure and Tribological Characteristics of HVOF Coatings Sprayed from Powder Blends of Cr₃C₂-25NiCr and NiCrBSi Alloy

    • A. Määttä
    • U. Kanerva
    • P. Vuoristo

    Peer Reviewed 30 October 2010 Pages: 366 - 371

    

44. Improved Hardfacing for Drill Bits and Drilling Tools

    • Albert Sue
    • Harry Sreshta
    • Bao He Qiu

    Peer Reviewed 02 November 2010 Pages: 372 - 377