1. Wear-Model-Based Analysis of the State of Blast Furnace Hearth | Mikko Helle, Henrik Saxén, Bart Graaff, Cornelis Bent |
2. The Effect of Rotary Degassing Treatments with Different Purging Gases on the Double Oxide- and Nitride Film Content of Liquid Aluminum Alloys | Gábor Gyarmati et al. |
3. Effect of Holding Time on Populations of Microparticles in Spheroidal Graphite Irons | L. Michels et al. |
4. Sn-Aided Joining of Cast Aluminum and Steel Through a Compound Casting Process | Aina Opsal Bakke, Arne Nordmark, Lars Arnberg, Yanjun Li |
5. Boride Coatings on Steel Protecting it Against Corrosion by a Liquid Lead-Free Solder Alloy | Zsolt Salyi et al. |
6. A Study of Bubble Behavior and Anode Effect on the Graphite and Industrial Carbon Anode in a See-Through Furnace During Aluminium Electrolysis | Nikolina Stanic et al. |
7. Thermodynamic Basis of Isothermal Carbothermic Reduction of Oxide in Liquid Steel for Simultaneous Analysis of Soluble/Insoluble Oxygen Contents in the Steel Specimens | Youn-Bae Kang, Yong-Min Cho, Hae-Mi Hong |
8. Segregation of a Phosphorus Rich Phase During Differential Solidification of BOF Slag | Thi Bang Tuyen Nguyen et al. |
9. Impact of Hydrogenous Gas Injection on the Blast Furnace Process: A Numerical Investigation | Florent Mauret et al. |
10. Modeling and Energy Efficiency Analysis of the Steelmaking Process in an Electric Arc Furnace | Jesús D. Hernández, Luca Onofri, Sebastian Engell |
11. Phase Equilibrium Studies in the CaO–SiO2–Al2O3–MgO System with MgO/CaO Ratio of 0.2 | Jinfa Liao, Gele Qing, Baojun Zhao |
12. Study of Flow and Heat Transfer in High Pressure Die Casting Cooling Channel | K. Arunkumar, Shamit Bakshi, Gandham Phanikumar, T. V. L. Narasimha Rao |
13. Archeometallurgical Study of a Renaissance Spearhead from Northern Italy | Paolomarco Merico, Michela Faccoli, Roberto Gotti, Giovanna Cornacchia |
14. Hydrogen as Carbon-Free Reducing Agent in Non-ferrous Slag Fuming | Desmond Attah-Kyei et al. |
15. HIsarna Process Simulation Model: Using FactSage with Macro Facility | Zhiming Yan, Theint Theint Htet, Johannes Hage, Koen Meijer, Zushu Li |
16. TiO2-Assisted Microstructural Variations in the Weld Metal of EH36 Shipbuilding Steel Subject to High Heat Input Submerged Arc Welding | Yongwu Wu, Xiaobo Yuan, Imants Kaldre, Ming Zhong, Zhanjun Wang, Cong Wang |
17. Inclusion Engineering in Medium Mn Steels: Effect of Hot-Rolling Process on the Deformation Behaviors of Oxide and Sulfide Inclusions | Yong Wang et al. |
18. Experimental Evaluation of MHD Modeling of EMS During Continuous Casting | Haijie Zhang et al. |
19. Numerical Investigation of Burden Distribution in Hydrogen Blast Furnace | Jing Li, Shibo Kuang, Ruiping Zou, Aibing Yu |
20. Reduction of FeO in Molten Slag by Solid Carbonaceous Materials for HIsarna Alternative Ironmaking Process | Darbaz Khasraw, Zhiming Yan, Johannes L. T. Hage, Koen Meijer, Zushu Li |
21. Lead Recovery From PbO Using Hydrogen as a Reducing Agent | A. Rukini, M. A. Rhamdhani, G. A. Brooks, A. Bulck |
22. Surface Morphology and Structural Evolution of Magnetite-Based Iron Ore Fines During the Oxidation | Heng Zheng et al. |
23. A Study of the Effect of Alloying Elements and Temperature on Nitrogen Solubility in Industrial Stainless Steelmaking | Jyrki Pitkälä, Lauri Holappa, Ari Jokilaakso |
24. Recovery of Cobalt and Lithium by Carbothermic Reduction of LiCoO2 Cathode Material: A Kinetic Study | Bintang A. Nuraeni et al. |
25. Assessment of Shaft Gas Injection Technology for Blast Furnace Ironmaking | Jing Li, Shibo Kuang, Ruiping Zou, Aibing Yu |