1. Characterization of the kinetic and mechanistic differences between free-surface and bulk grain growth in WC-Co materials

   • J. M. Olson
   • M. M. Makhlouf

   OriginalPaper Pages: 1261 - 1270

2. Phase precipitation and phase stability in nimonic 263

   • J. -C. Zhao
   • V. Ravikumar
   • A. M. Beltran

   OriginalPaper Pages: 1271 - 1282

3. Influence of pearlite morphology and heating rate on the kinetics of continuously heated austenite formation in a eutectoid steel

   • F. G. Caballero
   • C. Capdevila
   • C. García de Andrés

   OriginalPaper Pages: 1283 - 1291

4. Metastable phases in an Al-Mg-Si alloy containing copper

   • Kenji Matsuda
   • Susumu Ikeno
   • Tatsuo Sato

   OriginalPaper Pages: 1293 - 1299

5. Heat-transfer model for the acheson process

   • G. S. Gupta
   • P. Vasanth Kumar
   • M. Gupta

   OriginalPaper Pages: 1301 - 1308

6. Stress corrosion cracking relation with dezincification layer-induced stress

   • Xianzhong Guo
   • Kewei Gao
   • Wuyang Chu

   OriginalPaper Pages: 1309 - 1312

7. Optimization of mechanical properties of high-carbon pearlitic steels with Si and V additions

   • K. Han
   • D. V. Edmonds
   • G. D. W. Smith

   OriginalPaper Pages: 1313 - 1324

8. Cavitation erosion of copper and copper-based alloys

   • J. Hucińska
   • M. Głowack

   OriginalPaper Pages: 1325 - 1333

9. Qualitative model for creep of AZ91D magnesium alloy

   • M. Regev
   • A. Rosen
   • M. Bamberger

   OriginalPaper Pages: 1335 - 1345

10. Mechanical properties of Ir-Nb alloys containing Ni and Al

    • X. H. Yu
    • Y. Yamabe-Mitarai
    • H. Harada

    OriginalPaper Pages: 1347 - 1353

11. The modified quasi-chemical model: Part II. Multicomponent solutions

    • Arthur D. Pelton
    • Patrice Chartrand

    OriginalPaper Pages: 1355 - 1360

12. Thermodynamic evaluation and optimization of the LiCl-NaCl-KCl-RbCl-CsCl-MgCl₂-CaCl₂ system using the modified quasi-chemical model

    • Arthur D. Pelton
    • Patrice Chartrand

    OriginalPaper Pages: 1361 - 1383

13. Thermodynamic evaluation and optimization of the LiF-NaF-KF-MgF₂-CaF₂ system using the modified quasi-chemical model

    • Patrice Chartrand
    • Arthur D. Pelton

    OriginalPaper Pages: 1385 - 1396

14. The modified quasi-chemical model: Part III. Two sublattices

    • Patrice Chartrand
    • Arthur D. Pelton

    OriginalPaper Pages: 1397 - 1407

15. The modified quasi-chemical model: Part IV. Two-sublattice quadruplet approximation

    • Arthur D. Pelton
    • Patrice Chartrand
    • Gunnar Eriksson

    OriginalPaper Pages: 1409 - 1416

16. Thermodynamic evaluation and optimization of the Li, Na, K, Mg, Ca//F, Cl reciprocal system using the modified quasi-chemical model

    • Patrice Chartrand
    • Arthur D. Pelton

    OriginalPaper Pages: 1417 - 1430

17. Erosion-oxidation interaction in Ni and Ni-20Cr alloy

    • Manish Roy
    • K. K. Ray
    • G. Sundararajan

    OriginalPaper Pages: 1431 - 1451

18. The effect of the surface on grain boundary migration in austenitic stainless steel weld metal

    • S. Shibata
    • T. Watanabe

    OriginalPaper Pages: 1453 - 1458

19. Residual stresses and interface strengths in MoSi₂/stainless steel 316L joints produced by metallic-glass brazing

    • Rajendra U. Vaidya
    • Partha Rangaswamy
    • Marc Verdier

    OriginalPaper Pages: 1459 - 1465

20. The effect of grit blasting on the oxidation behavior of a platinum-modified nickel-aluminide coating

    • V. K. Tolpygo
    • D. R. Clarke
    • K. S. Murphy

    OriginalPaper Pages: 1467 - 1478

21. Numerical simulation of deformation-induced segregation in continuous casting of steel

    • T. Kajatani
    • J. -M. Drezet
    • M. Rappaz

    OriginalPaper Pages: 1479 - 1491

22. Microstructure evolution in metal-intermetallic laminate (MIL) composites synthesized by reactive foil sintering in air

    • David J. Harach
    • Kenneth S. Vecchio

    OriginalPaper Pages: 1493 - 1505

23. Nucleation sites for ultrafine ferrite produced by deformation of austenite during single-pass strip rolling

    • P. J. Hurley
    • B. C. Muddle
    • P. D. Hodgson

    OriginalPaper Pages: 1507 - 1517

24. MnS precipitation in association with manganese silicate inclusions in Si/Mn deoxidized steel

    • Han S. Kim
    • Hae-Geon Lee
    • Kyung-Shik Oh

    OriginalPaper Pages: 1519 - 1525

25. Stabilization mechanisms of retained austenite in transformation-induced plasticity steel

    • Jiajun Wang
    • Sybrand Van Der Zwaag

    OriginalPaper Pages: 1527 - 1539

26. Methodology to design the interfaces in SiC/Al composites

    • Jae-Chul Lee
    • Ho-In Lee
    • Zhongliang Shi

    OriginalPaper Pages: 1541 - 1550

27. In-situ characterization of γ/γ′ lattice stability in a nickel-base superalloy by neutron diffraction

    • D. -Q. Wang
    • S. S. Babu
    • P. G. Radaelli

    Communications Pages: 1551 - 1552

28. Hydride formation and its effects on mechanical properties of Ti-5111

    • Z. F. Wang
    • N. Chollocoop
    • K. S. Kumar

    Communications Pages: 1552 - 1556

29. Strain-path effects during hot working of Ti-6Al-4V with a colony-alpha microstructure

    • S. L. Semiatin
    • J. O. Brown
    • J. H. Beynon

    Communications Pages: 1556 - 1559

30. A new route to bulk nanostructured metals

    • Yuntian T. Zhu
    • Honggang Jiang
    • Terry C. Lowe

    Communications Pages: 1559 - 1562