Abstract
A method for the calculation of the self-heating temperature in the material body of pneumatic tires during rolling motion by the finite element method is developed. The calculation is performed from the results of the calculation of the stressed-strained state of the tire by the finite element method in a tree-dimensional formulation. Problems of stationary and nonstationary heat conduction for different types of pneumatic tires are solved for the purpose of the estimation of the maximum allowable rate of motion. The calculation results are correlated with the experimental data.
Similar content being viewed by others
References
Adamov, A.A., Simulation of Nonlinear Viscous-Elastic Behavior of Compounded Rubbers under Cyclic Stressing and under Different Kinds of Stressed-Deformed State, Materialy mezhdunar. konf. po kauchuku i rezine “Rubber-94” (Proc. International Conf. on Caoutchouc and Rubber “Rubber-94”), Moscow, 1994, pp. 349–355.
Khromov, M.K., Primenenie pokazatelei ustalostnykh svoistv rezin dlya otsenki kachestva (The Way to Use Fatigue Properties Indexes for Rubber Quality Estimation), Moscow: TsNIITENeftekhim, 1987.
Guslitser, R.L., Shina i avtomobil’ (Tire and Car), Moscow: N.-t. tsentr “NIIShP”, 2007.
Skornyakov, E.S., Krupnogabaritnye shiny avtomobilei i traktorov (Big-Volume Tires of Cars and Tractors), Dnepropetrovsk: Porogi, 2000.
Belkin, A.E., Gol’dberg, Yu.L., Narskaya, N.L. et al. The Elements of Automatized Design and Calculation of Stress State of Radial Tires, Materialy mezhdunar. konf. po kauchuku i rezine “Rubber-94” (Proc. International Conf. on Caoutchouc and Rubber “Rubber-94”), Moscow, 1994, pp. 56–63.
Ebbott, T.G., Hohman, R.L., Jeusette, J.P., and Kerchman, V., Tire Temperature and Rolling Resistance Prediction with Finite Element Analysis, Tire Science and Technology. TSTCA, 1999, vol. 27, no. 1, pp. 2–21.
Sokolov, S.L., Calculation of Stressed-Deformed State of Pneumatical Tires Using Finite Elements Method, Problemy mashinostroeniya i nadezhnosti mashin, 2007, no. 1, pp. 57–62.
Nenakhov, A.B., Sokolov, S.L., and Marchenko, S.I., The Way to Determine the Temperature Field of Radial Tires Under Their Rolling on the Base of Deformation Calculation Using Finite Elements Method, Materialy VIII simposiuma “Problemy shin i rezinokordnykh kompositov” (Proc. VIII Symp. “Tires and Rubber-Cord Composites Problems”), Moscow: NIIShP, 20–24 of October 1997, pp. 284–293.
Pichugin, A.M., Materialovedcheskie aspekty sozdaniya shinnikh rezin (Material Aspects of Tire Rubber Development), Moscow, 2008.
Gluskina, L.S. and Guslitser, R.L., Temperature Mode of Car Tires Operation under Road Conditions, Materialy mezhdunar.konf. po kauchuku i rezine “Rubber-84” (Proc. International Conf. on Caoutchouc and Rubber “Rubber-84”), Moscow, 1984, issue 34.
Knoroz, V.I., Rabota avtomobil’noi shiny (Car Tire Operation), Moscow: Avtotransizdat, 1960.
Gal’chenko, I.I., Research of Pneumatical Tires Heating Modes, Extended Abstract of Cand. Sci. Dissertation, Moscow, 1985.
Sokolov, S.L. and Nenakhov, A.B., Forecasting of Pneumatical Tires Durability, Materialy 19 simposiuma “Problemy shin i resinokordnykh kompositov” (Proc. 19 Symp. “Tires and Rubber-Cord Composites Problems”), Moscow: OOO N.-t. tsentr “NIIShP”, 2008, vol. 2, pp. 180–190.
Author information
Authors and Affiliations
Additional information
Original Russian Text © S.L. Sokolov, 2009, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2009, No. 3, pp. 111–116.
About this article
Cite this article
Sokolov, S.L. Analysis of the heat state of pneumatic tires by the finite element method. J. Mach. Manuf. Reliab. 38, 310–314 (2009). https://doi.org/10.3103/S1052618809030182
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618809030182