Abstract
The paper is focused on a very hot topic of SMART materials and their architectures for energy conversion systems designed for conversion of mechanical to electrical energy using the piezoelectric effect. The aim of the study is to increase both the reliability and efficiency of electromechanical conversion compared to standard concepts. Our new design of piezoelectric cantilever is made with multi-layer ceramic composite, where piezoelectric layer BaTiO3 is covered by protective ceramics layers of different residual stresses, where Al2O3 and ZrO2 is used. Utilization of controlled residual stresses into new multi-layer architecture is the key idea and it is crucial for optimal design of the individual layers of the proposed concept. The multi-layer ceramic composite is fabricated by electrophoretic deposition, where the composite is assembled from different ceramic materials during processing and after sintering we get inseparable ceramic laminate consisting of piezoelectric and protective layers of ceramics. This approach of processing multi-layer ceramic material including lead free piezoelectric layers is innovative and has never been published before.
Similar content being viewed by others
References
J.W. Yi, W.Y. Shih, W.-H. Shih, J. Appl. Phys. 91, 1680 (2002)
Y. Bai, P. Tofel, Z. Hadas et al., Mech. Syst. Signal Process. 106, 303 (2018)
H.-C. Song, H.-C. Kim, C.-Y. Kang et al., J. Electroceram. 23, 301 (2009)
K. Tungpimolrut, N. Hatti, J. Phontip et al., in 2011 International Symposium on Applications of Ferroelectrics (ISAF/PFM) and 2011 International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials (IEEE, 2011), p. 1
Y. Wang, W. Chen, P. Guzman, J. Intell. Mater. Syst. Struct. 27, 2324 (2016)
M. Zielinski, F. Mieyeville, D. Navarro, O. Bareille, in Federated Conference on Computer Science and Information Systems, 2014, (IEEE, 2014), p. 1065
Y. Bai, Z. Havránek, P. Tofel et al., Eur. Phys. J. Special Topics 224, 2675 (2015)
O. Rubes, M. Brablc, Z. Hadas, Mech. Syst. Signal Process. 125, 170 (2019)
T.-Y. Zhang, M. Zhao, P. Tong, Adv. Appl. Mech. 38, 147 (2002)
H. Hadraba, D. Drdlik, Z. Chlup et al., J. Eur. Ceram. Soc. 32, 2053 (2012)
H. Hadraba, Z. Chlup, D. Drdlik, J. Cihlar, J. Eur. Ceram. Soc. 36, 365 (2016)
Z. Chlup, H. Hadraba, L. Slabáková et al., J. Eur. Ceram. Soc. 32, 2057 (2012)
L. Sestakova, R. Bermejo, Z. Chlup, R. Danzer, Int. J. Mater. Res. 102, 613 (2011)
P. Parente, Y. Ortega, B. Savoini et al., Acta. Mater. 58, 3014 (2010)
M. Mehrali, H. Wakily, I.H.S.C. Metselaar, Adv. Appl. Ceram. 110, 35 (2011)
K. Castkova, K. Maca, J. Cihlar et al., J. Am. Ceram. Soc. 98, 2373 (2015)
Y. Jiang, T. Thongchai, Y. Bai et al., in IEEE International Ultrasonics Symposium, IUS (2014)
Y. Bai, A. Matousek, P. Tofel et al., J. Eur. Ceram. Soc. 35, 3445 (2015)
V. Bijalwan, P. Tofel, V. Holcman, J. Asian. Ceram. Soc. 6, 384 (2018)
Y. Bai, P. Tofel, J. Palosaari et al., Adv. Mater. 29, 1700767 (2017)
Y. Huan, X. Wang, J. Fang, L. Li, J. Am. Ceram. Soc. 96, 3369 (2013)
Y. Huan, X. Wang, J. Fang, L. Li, J. Eur. Ceram. Soc. 34, 1445 (2014)
J.C. Wang, P. Zheng, R.Q. Yin et al., Ceram. Int. 41, 14165 (2015)
Y. Wu, J. Zhang, Y. Tan, P. Zheng, Ceram. Int. 42, 9815 (2016)
L. Cheng, M. Sun, F. Ye et al., Int. J. Light. Mater. Manuf. 1, 126 (2018)
K. Maca, H. Hadraba, J. Cihlar, Ceram. Int. 30, 843 (2004)
H. Hadraba, K. Maca, J. Cihlar, Ceram. Int. 30, 853 (2004)
H. Hadraba, D. Drdlik, Z. Chlup et al., J. Eur. Ceram. Soc. 33, 2305 (2013)
D. Benasciutti, L. Moro, S. Zelenika, E. Brusa, Microsyst. Technol. 16, 657 (2010)
Z. Hadas, L. Janak, J. Smilek, Mech. Syst. Signal. Process. 110, 152 (2018)
C.R. Bowen, H.A. Kim, P.M. Weaver, S. Dunn, Energy Environ. Sci. 7, 25 (2014)
T. Fett, D. Munz, Stress intensity factors and weight functions (Computational Mechanics Publications, Southampton, UK, Boston, MA, USA, 1997)
H.F. Bueckner, Novel Principle for the Computation of Stress Intensity Factors (Akademie-Verlag GmbH, Berlin, 1970)
M. Lugovy, V. Slyunyayev, N. Orlovskaya et al., Acta. Mater. 53, 289 (2005)
T. Fett, D. Munz, Y.Y. Yang, Eng. Fract. Mech. 65, 393 (2000)
L. Besra, M. Liu, Prog. Mater. Sci. 52, 1 (2007)
N. Sato, M. Kawachi, K. Noto et al., Physica C 357, 1019 (2001)
P.Z. Cai, D.J. Green, G.L. Messing, J. Am. Ceram. Soc. 80, 1929 (2005)
K. Maca, V. Pouchly, D. Drdlik et al., J. Eur. Ceram. Soc. 37, 4287 (2017)
L.-F. Zhu, B.-P. Zhang, J.-Q. Duan et al., J. Eur. Ceram. Soc. 38, 3463 (2018)
S.J.L. Kang, Sintering: Densification, Grain Growth and Microstructure (Elsevier Science, 2004)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tofel, P., Machu, Z., Chlup, Z. et al. Novel layered architecture based on Al2O3/ZrO2/BaTiO3 for SMART piezoceramic electromechanical converters. Eur. Phys. J. Spec. Top. 228, 1575–1588 (2019). https://doi.org/10.1140/epjst/e2019-800153-0
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1140/epjst/e2019-800153-0