Abstract.
Ferromagnetic shape memory alloys have been manufactured by various techniques involving rapid solidification. Bulk alloys have been obtained by extracting the melted alloy in especially designed copper molds; glass coated wires have been obtained by drawing the melt from glass recipients followed by water cooling and ribbons have been fabricated by melt-spinning. Microstructural observations show particular solidification aspects of fractured areas, while ferromagnetic behavior has been detected in glass coated wires obtained by rapid solidification. The martensitic microstructure was observed on Co-Ni-Ga rapid solidified bulk alloys and Fe-Pd ribbons. The memory effect was detected using a Vibran system that allows the detection of the phase transition for the ribbons and by visual observation for other specimens. The conclusions of the observations are related to the comparison between the ferromagnetic behaviors of shape memory alloys solidified using different techniques.
Similar content being viewed by others
References
V.A. Chernenko, V.V. Kokorin, I.N. Vitenko, Smart Mater. Struct. 3, 80 (1994)
T. Kubota, Y. Furuya, T. Okazaki, M. Munemi, J. Jpn. Inst. Metals 65, 827 (2001)
J.W. Dong, L.C. Chen, C.J. Palmstrom, R.D. James, S. McKeman, Appl. Phys. Lett. 75, 1443 (1999)
S. Inoue, K. Inoue, S. Fujita, K. Koterazawa, Mater. Trans. 44, 298 (2003)
H. Chiriac, T.A. Ovari, Gh. Pop, F. Barariu, EU Pat. EP 0 870 308; Romanian Pat. RO 95–02277; US Patent 6,270,591
G.F. Taylor, Phys. Rev. 24, 655 (1924)
T. Kubota, T. Okazaki, H. Kimura, T. Watanabe, M. Wuttig, Y. Furuya, Sci. Technol. Adv. Mater. 3, 201 (2002)
T. Kanada, M. Enokizono, J. Magn. Mag. Mater. 196, 349 (1999)
A.V. Torcunov, S.A. Baranov, V.S. Larin, J. Magn. Mag. Mater. 196-197, 835 (1999)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Craciunescu, C., Ercuta, A., Mitelea, I. et al. Rapidly solidified ferromagnetic shape memory alloys. Eur. Phys. J. Spec. Top. 158, 161–165 (2008). https://doi.org/10.1140/epjst/e2008-00670-6
Issue Date:
DOI: https://doi.org/10.1140/epjst/e2008-00670-6