Skip to main content
Log in

New force transmissibility and optimization for a nonlinear dynamic vibration absorber

  • Regular Article
  • Published:
The European Physical Journal Special Topics Aims and scope Submit manuscript

Abstract

Combining the nonlinear characteristic of the smooth and discontinuous (SD) oscillator and the magnetorheological fluid (MRF), a nonlinear dynamic vibration absorber (DVA) with variable frequency and variable damping is constructed. To evaluate its performance, new force transmissibility based on the accessibility and wide applicability of the acceleration is proposed. Specifically, the root mean square is employed to define the force transmissibility as the ratio of the inertial force of the main system and the external force. Furthermore, with the proposed transmissibility as the evaluation index, a two-step optimization method is designed to optimize the parameters of the nonlinear DVA in a wide frequency range, which overcomes the limitation of the traditional single optimization method in broadband vibration reduction. The time-domain dynamic analysis of the main structure is carried out to show the effectiveness and superiority of the two-step optimization method using the time history diagram, phase diagram, Poincaré map, and frequency spectrum. It is worthwhile noting that the two-step optimization method makes it possible to obtain great broadband damping with fewer parameter adjustments, which leads to extend the life of the nonlinear system.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

Data Availability Statement

This manuscript has associated data in a data repository. [Authors’ comment: The data that support the findings of this study are available on request from the corresponding author.]

References

  1. P. Gao, C. Xiang, H. Liu et al., Reducing variable frequency vibrations in a powertrain system with an adaptive tuned vibration absorber group. J. Sound Vib. 425, 82–101 (2018)

    Article  ADS  Google Scholar 

  2. Feudo S. Lo, C. Touzé, J. Boisson et al., Nonlinear magnetic vibration absorber for passive control of a multi-storey structure. J. Sound Vib. 438, 33–53 (2019)

    Article  ADS  Google Scholar 

  3. X.T. Sun, J. Xu, F. Wang, L. Cheng, Design and experiment of nonlinear absorber for equal-peak and de-nonlinearity. J. Sound Vib. 449, 274–299 (2019)

    Article  ADS  Google Scholar 

  4. H. Ding, L.Q. Chen, Designs, analysis, and applications of nonlinear energy sinks. Nonlinear Dyn. 100, 3061–3107 (2020)

  5. H. White, R.. G. Goyder, Vibrational power flow from machines into built-up structures. J. Sound Vib. 68(1), 59–117 (1980)

    Article  ADS  Google Scholar 

  6. A. Carrella, M.J. Brennan, T.P. Waters et al., Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness. Int. J. Mech. Sci. 55(1), 22–29 (2012)

    Article  Google Scholar 

  7. Z. Milovanovic, I. Kovacic, On the displacement transmissibility of a base excited viscously damped nonlinear vibration isolator. J. Vib. Acoust. 131(5), 13–24 (2009)

    Article  Google Scholar 

  8. Z. Lu, M.J. Brennan, L.Q. Chen, On the transmissibilities of nonlinear vibration isolation system. J. Sound Vib. 375, 28–37 (2016)

    Article  ADS  Google Scholar 

  9. J. Zang, Y.W. Zhang, H. Ding et al., The evaluation of a nonlinear energy sink absorber based on the transmissibility. Mech. Syst. Signal Pr. 125, 99–122 (2018)

    Article  Google Scholar 

  10. J.X. Zhou, K. Wang, D. Xu et al., Vibration isolation in neonatal transport by using a quasi-zero-stiffness isolator. J. Sound Vib. 24(15), 3278–3291 (2018)

    Google Scholar 

  11. J.Q. Xiong, Research on subjective rating attenuation analysis of automobile NVH characteristics. Proc. Comput. Sci. 154, 383–388 (2019)

    Article  Google Scholar 

  12. D.H. Yang, J.H. Shin, H.W. Lee et al., Active vibration control of structure by active mass damper and multi-modal negative acceleration feedback control algorithm. J. Sound Vib. 392, 18–30 (2017)

    Article  ADS  Google Scholar 

  13. N. Khodaie, Vibration control of super-tall buildings using combination of tapering method and TMD system. J. Wind Eng. Ind. Aerodyn. 196, 104031 (2020)

    Article  Google Scholar 

  14. J.P. Den Hartog, Mechanical Vibrations, 4th edn. (McGraw-Hill, New York, 1956)

  15. J.E. Brock, Theory of the damped dynamic vibration absorber for inertial disturbances. J. Appl. Mech-T ASME 16, 86–92 (1949)

    Article  ADS  Google Scholar 

  16. T. Royston, J.. R. Singh, Optimization of passive and active non-linear vibration mounting systems based on vibratory power transmission. J. Sound Vib. 194(3), 295–316 (1996)

    Article  ADS  Google Scholar 

  17. K. Yang, Y.W. Zhang, H. Ding et al., The transmissibility of nonlinear energy sink based on nonlinear output frequency-response functions. Commun. Nonlinear Sci. 44, 184–192 (2016)

    Article  MathSciNet  Google Scholar 

  18. M. Kassem, Z.C. Yang, Y.S. Gu, W. Wang, E. Safwat, Active dynamic vibration absorber for flutter suppression. J. Sound Vib. 469, 115110 (2020)

    Article  Google Scholar 

  19. Q.J. Cao, M. Wiercigroch, E. Pavlovskaia, Archetypal oscillator for smooth and discontinuous dynamics. Phys. Rev. E 74, 046218 (2006)

    Article  ADS  MathSciNet  Google Scholar 

  20. L. Duval, M.N. Noori, Z. Hou et al., Random vibration studies of an SDOF system with shape memory restoring force. Phys. B 275(1–3), 138–141 (2000)

    Article  ADS  Google Scholar 

  21. T.E. Dye, An Experimental Investigation of the Behavior of Nitinol (Virginia Tech, Virginia, 1990)

    Google Scholar 

  22. X. Y. Wang, X. Z. Zhou, W. H. Li, in Variable Stiffness and Damping MR Isolation System. 15th International Congress on Sound and Vibration (2008), pp. 283–290

  23. K. Feng, Y. Cao, K. Yu et al., Characterization of a controllable stiffness foil bearing with shape memory alloy springs. Tribol. Int. 136, 360–371 (2019)

    Article  Google Scholar 

  24. S. Saravanamurugan, T. Alwarsamy, K. Devarajan, Optimization of damped dynamic vibration absorber to control chatter in metal cutting process. J. Vib. Control 21(5), 949–958 (2015)

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Grant Nos. 12072203, 11872253), the Hundred Excellent Innovative Talents in Hebei Province (Grant No. SLRC2019037), the “333 talent project” in Hebei (A202005007), the Natural Science Foundation in Hebei Province of China (Grant No. A2019421005), the Hebei Provincial Department of Education Project (Grant No. ZD2020328).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Xinwei Yang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tian, R., Wang, T., Yang, X. et al. New force transmissibility and optimization for a nonlinear dynamic vibration absorber. Eur. Phys. J. Spec. Top. 231, 2359–2370 (2022). https://doi.org/10.1140/epjs/s11734-022-00425-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1140/epjs/s11734-022-00425-9

Navigation