Skip to main content

Advertisement

SpringerLink
Log in

Real-time implementation in dSPACE of DTC-backstepping for a doubly fed induction motor

  • Regular Article
  • Published:
The European Physical Journal Plus Aims and scope Submit manuscript

Abstract.

In this paper, a new direct torque control (DTC) scheme for a doubly fed induction motor (DFIM) powered by two voltage source inverters is designed and implemented to improve the dynamic response and performance of the system. The conventional DTC scheme of the DFIM is widely used due to its high performance, robustness and simplicity of implementation. However, the electromagnetic torque and the flux controlled by classical DTC have high ripples. To overcome these drawbacks and to ensure fast response and full reference tracking with the desired dynamic behavior and low ripple level, the combined DTC-backstepping control using a backstepping controller is developed and validated; this strategy is based on the Lyapunov theory to ensure a robust control, less sensitivity from machine parameter variation and without overshoot, unlike the classical PI controllers. The proposed DTC scheme will be investigated by simulation tests using Matlab/Simulink and experimental implementation using dSPACE DS1104 board. Results obtained by simulation and experimentation show the effectiveness of the proposed control in terms of rapidity, robustness and stability for the DFIM operating at variable speeds.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. F. Bonnet, P.E. Vidal, M. Pietrzak-David, IEEE Trans. Ind. Electron. 54, 2482 (2007)

    Article  Google Scholar 

  2. Y. Ihedrane, C. El Bekkali, B. Bossoufi, M. Bouderbala, Control of Power of a DFIG Generator with MPPT Technique for Wind Turbines Variable Speed, in Modeling, Identification and Control Methods in Renewable Energy Systems (Springer, Singapore, 2019) pp. 105--129

    Google Scholar 

  3. S. Kammoun, S. Sallem, M.B.A. Kammoun, Eur. Phys. J. Plus 132, 470 (2017)

    Article  Google Scholar 

  4. B. Bossoufi, M. Karim, A. Lagrioui, M. Taoussi, A. Derouich, Renew. Energy 81, 903 (2015)

    Article  Google Scholar 

  5. Y. Soufi, T. Bahi, S. Lekhchine, D. Dib, Energy Convers. Manag. 72, 187 (2013)

    Article  Google Scholar 

  6. N. El Ouanjli, M. Taoussi, A. Derouich, A. Chebabhi, A. El Ghzizal, B. Bossoufi, Gazi Univ. J. Sci. 31, 532 (2018)

    Google Scholar 

  7. N. Bounar, A. Boulkroune, F. Boudjema, M. Farza, Neurocomputing 151, 756 (2015)

    Article  Google Scholar 

  8. N. El Ouanjli, A. Derouich, A. El Ghzizal, Y. El Mourabit, M. Taoussi, Int. J. Power Electron. Drive Syst. 8, 1117 (2017)

    Google Scholar 

  9. M. Taoussi, M. Karim, B. Bossoufi, D. Hammoumi, A. Lagrioui, A. Derouich, Int. J. Autom. Control 10, 12 (2016)

    Article  Google Scholar 

  10. M. Debbou, M. Pietrzak-David, Acoustic noise reduction in VSI-DFIM for electrical naval propulsion, in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society (IEEE, 2015) pp. 004531--004537

  11. N. El Ouanjli, A. Derouich, A. El Ghzizal, A. Chebabhi, M. Taoussi, A comparative study between FOC and DTC control of the Doubly Fed Induction Motor (DFIM), in 2017 International Conference on Electrical and Information Technologies (ICEIT) (IEEE, 2017) pp. 1--6

  12. M. Taoussi, M. Karim, B. Bossoufi, D. Hmmoumi, C. Bakkali, A. Derouich, N. El Ouanjli, WSEAS Trans. Syst. Control. 12, 405 (2017)

    Google Scholar 

  13. S. Lekhchinea, T. Bahib, I. Aadliab, Z. Layateb, H. Bouzeriac, Energy Proc. 74, 575 (2015)

    Article  Google Scholar 

  14. I. Sarasola, J. Poza, M.A. Rodriguez, G. Abad, Energy Convers. Manag. 52, 1226 (2011)

    Article  Google Scholar 

  15. C.M.F.S. Reza, M.D. Islam, S. Mekhilef, Renew. Sustain. Energy Rev. 37, 919 (2014)

    Article  Google Scholar 

  16. I. Takahashi, T. Noguchi, IEEE Trans. Ind. Appl. 5, 820 (1986)

    Article  Google Scholar 

  17. M. Abdellatif, M. Debbou, I. Slama-Belkhodja, M. Pietrzak-David, IEEE Trans. Ind. Electron. 61, 3915 (2014)

    Article  Google Scholar 

  18. T. Sutikno, N.R.N. Idris, A. Jidin, Renew. Sustain. Energy Rev. 32, 548 (2014)

    Article  Google Scholar 

  19. A. Ammar, A. Bourek, A. Benakcha, Front. Energy, https://doi.org/10.1007/s11708-017-0444-z (2017)

  20. B.L.G. Costa, C.L. Graciola, B.A. Angelico, A. Goedtel, M.F. Castoldi, Appl. Soft Comput. 62, 776 (2018)

    Article  Google Scholar 

  21. M.S. Zaky, Electr. Power Syst. Res. 119, 293 (2015)

    Article  Google Scholar 

  22. N. El Ouanjli, A. Derouich, A. El Ghzizal, A. Chebabhi, M. Taoussi, B. Bossoufi, IOP Conf. Ser.: Earth Environ. Sci. 161, 012004 (2018)

    Article  Google Scholar 

  23. F. Boumaraf, M.L. Bendaas, R. Abdessemed, S. Belkacem, Int. J. Electr. Eng. Inform. 7, 541 (2015)

    Article  Google Scholar 

  24. A. Zemmit, S. Messalti, A. Harrag, Int. J. Appl. Eng. Res. 11, 9099 (2016)

    Google Scholar 

  25. A. Zemmit, S. Messalti, A. Harrag, Ain Shams Eng. J. 9, 1877 (2018)

    Article  Google Scholar 

  26. Y. El Mourabit, A. Derouich, A. El Ghzizal, N. El Ouanjli, O. Zamzoum, Int. J. Power Electron. Drive Syst. 8, 1732 (2017)

    Google Scholar 

  27. S. Gdaim, A. Mtibaa, M.F. Mimouni, IEEE Trans. Fuzzy Syst. 23, 644 (2015)

    Article  Google Scholar 

  28. S. Mensou, A. Essadki, T. Nasser, B.B. Idrissi, Int. J. Renew. Energy Res. 7, 1520 (2017)

    Google Scholar 

  29. S. Abderazak, N. Farid, Comparative study between Sliding mode controller and Fuzzy Sliding mode controller in a speed control for doubly fed induction motor, in IEEE 4th International Conference in Control Engineering & Information Technology (IEEE, 2016) pp. 1--6

Download references

Author information

Authors and Affiliations

  1. Laboratory of Production Engineering, Energy and Sustainable Development, Higher School of Technology, Sidi Mohamed Ben Abdellah University, Fez, Morocco

    Najib El Ouanjli, Aziz Derouich, Abdelaziz El Ghzizal & Youness El Mourabit

  2. Laboratory of Electrical Engineering and Maintenance, Higher School of Technology, University Mohammed I, Oujda, Morocco

    Jamal Bouchnaif & Badre Bossoufi

  3. Laboratory of Systems Integration and Advanced Technologies, Faculty of Sciences Dhar El Mahraz, Sidi Mohamed Ben Abdellah University, Fez, Morocco

    Mohammed Taoussi

Authors
  1. Najib El Ouanjli
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Aziz Derouich
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Abdelaziz El Ghzizal
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jamal Bouchnaif
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Youness El Mourabit
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Mohammed Taoussi
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Badre Bossoufi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Najib El Ouanjli.

Additional information

Publisher’s Note

The EPJ Publishers remain neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

El Ouanjli, N., Derouich, A., El Ghzizal, A. et al. Real-time implementation in dSPACE of DTC-backstepping for a doubly fed induction motor. Eur. Phys. J. Plus 134, 566 (2019). https://doi.org/10.1140/epjp/i2019-12961-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1140/epjp/i2019-12961-x

Search

Navigation