Abstract
The paper introduces a novel concept for structural glass shells that is based on the mechanical coupling of double curved heat-bent glass panels and a wire frame mesh, which constitutes a grid of unbonded edge-reinforcement. Additionally, this grid has the purpose of providing redundancy. The panels have load-bearing function, they are clamped at the vertices and dry-assembled. The main novelty lies in the use of polygonal curved panels with a nodal force transfer mechanism. This concept has been validated on an illustrative design case of a 6 m-diameter suspended glass sphere, in which regular pentagonal and hexagonal spherical panels are employed. The good strength and stiffness achieved for this structure is demonstrated by means of local and global FE models. Another fundamental feature of the concept is that the reinforcement grid provides residual strength in the extreme scenarios in which all panels are completely failed. A quantitative measure of redundancy is obtained by comparing this scenario with the ULS.
Similar content being viewed by others
References
Adriaenssens, S., Ney, L., Bodarwe, E., Williams, C.: Finding the form of an irregular meshed steel and glass shell based on construction constraints. J. Archit. Eng. 18(3), 206–213 (2012). https://doi.org/10.1061/(ASCE)AE.1943-5568.0000074
Bagger, A.: Plate shell structures of glass: Studies leading to guidelines for structural design. Ph.D. thesis, Technical University of Denmark (DTU) (2010)
Bedon, C., Amadio, C.: Flexural-torsional buckling: experimental analysis of laminated glass elements. Eng. Struct. 73, 85–99 (2014). https://doi.org/10.1016/j.engstruct.2014.05.003
Bedon, C., Amadio, C.: Shear glass panels with point-fixed mechanical connections: finite-element numerical investigation and buckling design recommendations. Eng. Struct. 112, 233–244 (2016). https://doi.org/10.1016/j.engstruct.2016.01.024
Bedon, C., Amadio, C.: Glass facades under seismic events and explosions: a novel distributed-tmd design concept for building protection. Glass Struct. Eng. 3(2), 257–274 (2018). https://doi.org/10.1007/s40940-018-0058-9
Bedon, C., Belis, J., Amadio, C.: Structural assessment and lateral-torsional buckling design of glass beams restrained by continuous sealant joints. Eng. Struct. 102, 214–229 (2015). https://doi.org/10.1016/j.engstruct.2015.08.021
Bedon, C., Louter, C.: Finite-element analysis of post-tensioned sg-laminated glass beams with mechanically anchored tendons. Glass Struct. Eng. 1(1), 39–59 (2016). https://doi.org/10.1007/s40940-016-0020-7
Bedon, C., Zhang, X., Santos, F., Honfi, D., Kozłowski, M., Arrigoni, M., Figuli, L., Lange, D.: Performance of structural glass facades under extreme loads-design methods, existing research, current issues and trends. Constr. Build. Mater. 163, 921–937 (2018). https://doi.org/10.1016/j.conbuildmat.2017.12.153
Belis, J., Louter, C., Nielsen, J.H., Schneider, J.: Architectural glass. In: Musgraves, J.D., Hu, J., Calvez, L. (eds.) Springer Handbook of Glass, pp. 1781–1819. Springer, Berlin (2019). https://doi.org/10.1007/978-3-319-93728-1_52
Blandini, L.: Structural use of adhesives in glass shells. Ph.D. thesis, Institut für Leichtbau Entwerfen und Konstruieren (ILEK), Universitat Stuttgart (2005)
Blandini, L.: Prototype of a frameless structural glass shell. Struct. Eng. Int. 18(3), 278–282 (2008). https://doi.org/10.2749/101686608785096586
Bruno, L., Sassone, M., Venuti, F.: Effects of the equivalent geometric nodal imperfections on the stability of single layer grid shells. Eng. Struct. 112, 184–199 (2016). https://doi.org/10.1016/j.engstruct.2016.01.017
Bukieda, P., Engelmann, M., Weller, B.: Testing procedure and the effect of testing machinery on four-point bending of curved glass. ce/papers 2(5–6), 311–323 (2018). https://doi.org/10.1002/cepa.933
Bundesverband Flachglas e.V: Guideline on thermally curved glass for building applications—BF-Bulletin 009. Tech. rep. (2011)
Casagrande, L., Bonati, A., Occhiuzzi, A., Caterino, N., Auricchio, F.: Numerical investigation on the seismic dissipation of glazed curtain wall equipped on high-rise buildings. Eng. Struct. 179, 225–245 (2019). https://doi.org/10.1016/j.engstruct.2018.10.086
CNR: Istruzioni per la progettazione, l’esecuzione e il controllo di costruzioni con elementi strutturali di vetro. Consiglio Nazionale delle Ricerche CNR-DT 210/2012 (2012)
Cupać, J., Martens, K., Nussbaumer, A., Belis, J., Louter, C.: Experimental investigation of multi-span post-tensioned glass beams. Glass Struct. Eng. 2(1), 3–15 (2017). https://doi.org/10.1007/s40940-017-0038-5
D’Ambrosio, G., Galuppi, L.: Enhanced effective thickness model for buckling of LG beams with different boundary conditions. Glass Struct. Eng. 5, 205–210 (2020). https://doi.org/10.1007/s40940-019-00116-3
Engelmann, M., Hayek, I.E., Friedreich, O., Weller, B.: Post-breakage performance of a spherical glass shell. In: Proceedings of IASS Annual Symposia, vol. 2017, pp. 1–6. International Association for Shell and Spatial Structures (IASS) (2017)
Engelmann, M., Weller, B.: Post-tensioned glass beams for a 9 m spannglass bridge. Struct. Eng. Int. 26(2), 103–113 (2016). https://doi.org/10.2749/101686616X14555428759000
Feldmann, M., et al.: Guidance for European Structural Design of Glass Components. Publications Office of the European Union, Brussels (2014)
Feng, Rq, Ge, Jm: Shape optimization method of free-form cable-braced grid shells based on the translational surfaces technique. Int. J. Steel Struct. 13(3), 435–444 (2013). https://doi.org/10.1007/s13296-013-3004-3
Fildhuth, T., Schieber, R., Oppe, M.: Design and construction with curved glass. ce/papers 2(5–6), 369–381 (2018). https://doi.org/10.1002/cepa.937
Froli, M., Laccone, F.: Experimental static and dynamic tests on a large-scale free-form voronoi grid shell mock-up in comparison with finite-element method results. Int. J. Adv. Struct. Eng. 9(3), 293–308 (2017). https://doi.org/10.1007/s40091-017-0166-9
Froli, M., Laccone, F.: Static concept for long-span and high-rise glass structures. J. Archit. Eng. 24(1), 04017030 (2018). https://doi.org/10.1061/(asce)ae.1943-5568.0000285
Froli, M., Lani, L.: Glass tensegrity trusses. Struct. Eng. Int. 20(4), 436–441 (2010). https://doi.org/10.2749/101686610793557564
Froli, M., Mamone, V.: A 12 meter long segmented post-tensioned steel-glass beam (TVT Gamma). In: Louter, C., Bos, F., Belis, J., Lebet, J.P. (eds.) Challenging Glass 4 & COST Action TU0905 Final Conference, pp. 243–251. CRC Press, Boca Raton (2014)
Galuppi, L., Massimiani, S., Royer-Carfagni, G.: Buckling phenomena in double curved cold-bent glass. Int. J. Non-Linear Mech. 64, 70–84 (2014). https://doi.org/10.1016/j.ijnonlinmec.2014.03.015
G+D Computing: Straus7 User’s Manual (2005)
G+D Computing: Using Strand7 (Straus7)—Introduction to the Strand7 Finite Element Analysis System (2010)
Haldimann, M., Luible, A., Overend, M.: Structural Use of Glass, vol. 10. Iabse, Zurich (2008)
Hayek, I.E., Engelmann, M., Friedreich, O., Weller, B.: Case study on a spherical glass shell. J. Int. Assoc. Shell Spat. Struct. 59(2), 105–118 (2018). https://doi.org/10.20898/j.iass.2018.196.874
Laccone, F.: Reinforced and post-tensioned structural glass shells: Concept, morphogenesis and analysis. Ph.D. thesis, University of Pisa (2019). https://doi.org/10.13131/unipi/etd/03062019-163928
Laccone, F., Malomo, L., Froli, M., Cignoni, P., Pietroni, N.: Automatic design of cable-tensioned glass shells. Comput. Graph. Forum 39(1), 260–273 (2020). https://doi.org/10.1111/cgf.13801
Liu, Q., Huang, X., Liu, G., Zhou, Z., Li, G.: Investigation on flexural buckling of laminated glass columns under axial compression. Eng. Struct. 133, 14–23 (2017). https://doi.org/10.1016/j.engstruct.2016.12.006
López-Aenlle, M., Pelayo, F., Ismael, G., Prieto, M.G., Rodríguez, A.M., Fernández-Canteli, A.: Buckling of laminated-glass beams using the effective-thickness concept. Compos. Struct. 137, 44–55 (2016). https://doi.org/10.1016/j.compstruct.2015.11.014
Louter, C., Belis, J., Veer, F., Lebet, J.P.: Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size. Eng. Struct. 36, 292–301 (2012). https://doi.org/10.1016/j.engstruct.2011.12.016
Ludwig, J.J., Weiler, H.U.: Tragstrukturen aus Glas am Beispiel einer Ganzglastonne-Schalenkonstruktion ohne tragende Stahlunterkonstruktion am Maximilianmuseum in Augsburg. Bautechnik 77(4), 246–249 (2000). https://doi.org/10.1002/bate.200001880
Luible, A., Schärer, D.: Lateral torsional buckling of glass beams with continuous lateral support. Glass Struct. Eng. 1(1), 153–171 (2016). https://doi.org/10.1007/s40940-016-0008-3
Martens, K., Caspeele, R., Belis, J.: Development of composite glass beams-a review. Eng. Struct. 101, 1–15 (2015a). https://doi.org/10.1016/j.engstruct.2015.07.006
Martens, K., Caspeele, R., Belis, J.: Development of reinforced and posttensioned glass beams: review of experimental research. J. Struct. Eng. 142(5), 04015173 (2015b). https://doi.org/10.1061/(ASCE)ST.1943-541X.0001453
Martens, K., Caspeele, R., Belis, J.: Load-carrying behaviour of interrupted statically indeterminate reinforced laminated glass beams. Glass Struct. Eng. 1(1), 81–94 (2016). https://doi.org/10.1007/s40940-016-0017-2
Mesnil, R., Douthe, C., Baverel, O.: Non-standard patterns for gridshell structures: fabrication and structural optimization. J. Int. Assoc. Shell Spat. Struct. 58(4), 277–286 (2017). https://doi.org/10.20898/j.iass.2017.194.893
Neugebauer, J.: Applications for curved glass in buildings. J. Facade Des. Eng. 2(1–2), 67–83 (2014). https://doi.org/10.3233/FDE-150016
Pottmann, H.: Architectural Geometry, vol. 10. Bentley Institute Press, Crewe (2007)
Romme, Sørvin, A., Bagger, I., Anne: Spaceplates building system. In: Cruz, P.J.D. (ed.) Structures and Architecture: Concepts, Applications and Challenges, pp. 1401–1408. CRC Press (2013)
Santarsiero, M., Bedon, C., Moupagitsoglou, K.: Energy-based considerations for the seismic design of ductile and dissipative glass frames. Soil Dyn. Earthq. Eng. 125, 105710 (2019). https://doi.org/10.1016/j.soildyn.2019.105710
Schlaich, J., Schober, H.: Glass-covered grid-shells. Struct. Eng. Int. 6(2), 88–90 (1996). https://doi.org/10.2749/101686696780495716
Timm, C., Chase, J.: Thermally curved glass for the building envelope. In: Challenging Glass 4 & COST Action TU0905 Final Conference, p. 141. CRC Press (2014)
Timoshenko, S.P., Gere, J.M.: Theory of Elastic Stability. Courier Corporation, Chelmsford (2012)
Veer, F.A., Wurm, J., Hobbelman, G.J.: The design, construction and validation of a structural glass dome. In: Proceedings of the Glass Processing Days. Poster, 12, vol. 12 (2003)
Villiger, J., Willareth, P., Doebbel, F., Nardini, V.: Interlocking glass spiral as building structure of the watch museum “La Maison des Fondateurs”. Glass Struct. Eng. 4(1), 3–16 (2019). https://doi.org/10.1007/s40940-018-0077-6
Wang, X., Feng, Rq, Yan, Gr, Liu, Fc, Xu, Wj: Effect of joint stiffness on the stability of cable-braced grid shells. International Journal of Steel Structures 16(4), 1123–1133 (2016). https://doi.org/10.1007/s13296-016-0041-8
Weller, B., Reich, S., Ebert, J.: Testing on Space Grid Structures with Glass as Compression Layer. In: Proceedings of the Challenging Glass Conference, Delft, pp. 155–162 (2008)
Wurm, J.: Glass Structures, Design and Construction of Self-supporting Skin. Birkhäuser, Berlin (2007)
Acknowledgements
The authors express their gratitude to Tommaso Fancelli for his collaboration to this work.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Froli, M., Laccone, F. Conceptual design and FEM structural response of a suspended glass sphere made of reinforced curved polygonal panels. Glass Struct Eng 6, 287–308 (2021). https://doi.org/10.1007/s40940-020-00130-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40940-020-00130-w