Abstract
Cl2-based inductively coupled plasmas (ICP) with low additional dc self-biases (−100V) produce convenient etch rates (500–1500Å·min−1) for III-nitride electronic device structures. A systematic study of the effects of additive gas (Ar, N2, H2), discharge composition, process pressure, and ICP source power and chuck power on etch rate and surface morphology has been performed. The general trends are to go through a maximum in etch rate with percent Cl2 in the discharge for all three mixtures, and to have an increase (decrease) in etch rate with source power (pressure). Since the etching is strongly ion-assisted, anisotropic pattern transfer is readily achieved. Maximum etch selectivities of approximately six for InN over the other nitrides were obtained.
Similar content being viewed by others
References
H.P. Gillis, D.A. Choutov and K.P. Martin, JOM 48, 50 (1996).
R.J. Shul, GaN and Related Materials, ed. S.J. Pearton (New York: Gordon and Breach, 1997).
I. Adesida, A. Mahajan, E. Andideh, M.A. Khan, D.T. Olsen and J.N. Kuznia, Appl. Phys. Lett. 63, 2777 (1993).
M.E. Lin, Z.F. Fan, Z. Ma, L.H. Allen and H. Morkoç, Appl. Phys. Lett. 64, 887 (1994).
H. Lee, D.B. Oberman and J.S. Harris, Jr., Appl. Phys. Lett. 67, 1754 (1995).
W. Pletschen, R. Niegurch and K.H. Bachem, Proc. Symp. Wide Bandgap Semiconductors and Devices, Vol. 95-21 (Dennington, NJ: Electrochemical Society, 1995), p. 241.
S.J. Pearton, C.R. Abernathy and F. Ren, Appl. Phys. Lett. 64, 2294 (1994).
L. Zhang, J. Ramer, J. Brown, K. Zheng, L.F. Lester and S.D. Hersee, Appl. Phys. Lett. 68, 367 (1996).
R.J. Shul, R.D. Briggs, S.J. Pearton, C.B. Vartuli, C.R. Abernathy, J.W. Lee, C. Constantine and C. Barratt, Mater. Res. Soc. Symp. Proc. 449, 969 (Pittsburgh, PA: Mater. Res. Soc., 1997).
O. Aktas, Z. Fan, S.N. Mohammad, A. Botcharev and H. Morkoç, Appl. Phys. Lett. 69, 25 (1996).
M.A. Khan, J.N. Kuznia, M.S. Shur, C. Eppens, J. Burm and W. Schaff, Appl. Phys. Lett. 66, 1083 (1995).
Y.F. Wu, B.P. Keller, S. Keller, D. Kapolnek, S.D. DenBaars and U.K. Mishra, IEEE Electron Dev. Lett. 17, 455 (1996).
M.A. Khan, Q. Chen, M.S. Shur, B.T. McDermott, J.A. Higgins, J. Burm, W. Schaff and L.F. Eastman, Electron. Lett. 32, 357 (1996).
Y.F. Wu, S. Keller, P. Kozodoy, B.P. Keller, P. Parikh, D. Kapolnek, S.P. DenBaars and V.K. Mishra, IEEE Electron. Dev. Lett. 18, 290 (1997).
C.R. Abernathy, J. Vac. Sci. Technol. A 11, 869 (1993).
C.R. Abernathy, Mater. Sci. Eng. Rep. R 14. 203 (1995).
See for example, High Density Plasma Sources, ed. O. Popov (Park Ridge, NJ: Noyes Publications, 1996).
J.W. Lee, J. Hong and S.J. Pearton, Appl. Phys. Lett. 68, 847 (1996).
S.C. McNevin, J. Vac. Sci. Technol. B 4, 1203 (1986).
M. Vernon, T.R. Hayes and V.M. Donnelly, J. Vac. Sci. Technol. A 10, 3499 (1992).
C.B. Vartuli, J.D. MacKenzie, J.W. Lee, C.R. Abernathy, S.J. Pearton and R.J. Shul, J. Appl. Phys. 80, 3705 (1996).
U.K. Chakrabarti, S.J. Pearton and F. Ren, Semicond. Sci. Technol. 6, 408 (1991).
S.J. Pearton, R.J. Shul, G. McLane and C. Constantine, Solid State Electron. 41, 159 (1997).
S.J. Pearton, C.R. Abernathy, F. Ren and J.R. Lothian, J. Appl. Phys. 76, 1210 (1994).
J. Burm, K. Chu, W.J. Schaff, L.F. Eastman, M.A. Khan, Q. Chen, J.W. Yang and M.S. Shur, IEEE Electron Dev. Lett. 18, 141 (1997).
S.M. Donovan, J.D. MacKenzie, C.R. Abernathy, S.J. Pearton, F. Ren, K. Jones and M. Cole, Appl. Phys. Lett. 70, 2592 (1997).
F. Ren, C.R. Abernathy, S.J. Pearton and P.W. Wisk, Appl. Phys. Lett. 64, 1508 (1994); F. Ren, R.J. Shul, C.R. Abernathy, S.N.G. Chu, J.R. Lothian and S.J. Pearton, Appl. Phys. Lett. 66, 1503 (1995).
C.B. Vartuli, S.J. Pearton, J.W. Lee, C.R. Abernathy, J.D. MacKenzie, J.C. Zolper, R.J. Shul and F. Ren, J. Electrochem. Soc. 143, 3681 (1996).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cho, H., Vartuli, C.B., Donovan, S.M. et al. Low bias dry etching of III-nitrides in Cl2-based inductively coupled plasmas. J. Electron. Mater. 27, 166–170 (1998). https://doi.org/10.1007/s11664-998-0380-0
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11664-998-0380-0