Abstract
Recently, Cu-based chalcogenides such as Cu3SbSe4, Cu2Se, and Cu2SnSe3 have attracted much attention because of their high thermoelectric performance and their common feature of very low thermal conductivity. However, for practical use, materials without toxic elements such as selenium are preferable. In this paper, we report Se-free Cu3SbS4 thermoelectric material and improvement of its figure of merit (ZT) by chemical substitutions. Substitutions of 3 at.% Ag for Cu and 2 at.% Ge for Sb lead to significant reductions in the thermal conductivity by 37% and 22%, respectively. These substitutions do not sacrifice the power factor, thus resulting in enhancement of the ZT value. The sensitivity of the thermal conductivity to chemical substitutions in these compounds is discussed in terms of the calculated phonon dispersion and previously proposed models for Cu-based chalcogenides. To improve the power factor, we optimize the hole carrier concentration by substitution of Ge for Sb, achieving a power factor of 16 μW/cm K2 at 573 K, which is better than the best reported for Se-based Cu3SbSe4 compounds.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
S. Fan, J. Zhao, J. Guo, Q. Yan, J. Ma, and H.H. Hng, Appl. Phys. Lett. 96, 182104 (2010).
J.P. Heremans, V. Jovovic, E.S. Toberer, A. Saramat, K. Kurosaki, A. Charoenphakdee, S. Yamanaka, and G.J. Snyder, Science 321, 554 (2008).
E.M. Levin, S.L. Bud’ko, and K. Schmidt-Rohr, Adv. Funct. Mater. 22, 2766 (2012).
G. Rogl, Z. Aabdin, E. Schafler, J. Horky, D. Setman, M. Zehetbauer, M. Kriegisch, O. Eibl, A. Grytsiv, E. Bauer, M. Reinecker, W. Schranz, and P. Rogl, J. Alloys Compd. 537, 183 (2012).
H. Liu, X. Shi, F. Xu, L. Zhang, W. Zhang, L.D. Chen, Q. Li, C. Uher, T. Day, and G.J. Snyder, Nat. Mater. 11, 422 (2012).
E.J. Skoug, J.D. Cain, and D.T. Morelli, Appl. Phys. Lett. 98, 261911 (2011).
E.J. Skoug, J.D. Cain, D.T. Morelli, M. Kirkham, P. Majsztrik, and E. Lara-Curzio, J. Appl. Phys. 110, 023501 (2011).
E.J. Skoug, J.D. Cain, P. Majsztrik, M. Kirkham, E. Lara-Curzio, and D.T. Morelli, Sci. Adv. Mater. 3, 602 (2011).
K. Suekuni, K. Tsuruta, T. Ariga, and M. Koyano, Appl. Phys. Express 5, 051201 (2012).
T. Plirdpring, K. Kurosaki, A. Kosuga, T. Day, S. Firdosy, V. Ravi, G.J. Snyder, A. Harnwunggmoung, T. Sugahara, Y. Ohishi, H. Muta, and S. Yamanaka, Adv. Mater. 24, 3622 (2012).
S. Ishiwata, Y. Shiomi, J.S. Lee, M.S. Bahramy, T. Suzuki, M. Uchida, R. Arita, Y. Taguchi, and Y. Tokura, Nat. Mater. 12, 512 (2013).
K. Hirono, M. Kono, and T. Irie, Jpn. J. Appl. Phys. 7, 54 (1968).
G. Kresse and J. Furthmuller, Comput. Mater. Sci. 6, 15 (1996).
G. Kresse and J. Furthmuller, Phys. Rev. B 54, 11169 (1996).
Y. Zhang, E.J. Skoug, J.D. Cain, V. Ozolins, D.T. Morelli, and C. Wolverton, Phys. Rev. B 85, 054306 (2012).
D.P. Spitzer, J. Phys. Chem. Solids 31, 19 (1970).
E.J. Skoug, J.D. Cain, and D.T. Morelli, Appl. Phys. Lett. 96, 181905 (2010).
W. Setyawan and S. Curtarolo, Comput. Mater. Sci. 49, 299 (2010).
O.L. Anderson, J. Phys. Chem. Solids 24, 909 (1963).
B. Mayer, H. Anton, E. Bott, M. Methfessel, J. Sticht, J. Harris, and P. Schmidt, Intermetallics 11, 23 (2003).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Suzumura, A., Watanabe, M., Nagasako, N. et al. Improvement in Thermoelectric Properties of Se-Free Cu3SbS4 Compound. J. Electron. Mater. 43, 2356–2361 (2014). https://doi.org/10.1007/s11664-014-3064-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-014-3064-y