Skip to main content
SpringerLink
Log in

Fundamental aspects of hot isostatic pressing: An overview

  • Invited Review
  • Published:
Metallurgical and Materials Transactions A Aims and scope Submit manuscript

Abstract

Hot isostatic pressing (hipping) can be used for upgrading castings, densifying presintered components, consolidating powders, and interfacial bonding. It involves the simultaneous application of a high pressure and elevated temperature in a specially constructed vessel. The pressure is applied with a gas (usually inert) and, so, is isostatic. Under these conditions of heat and pressure, internal pores or defects within a solid body collapse and diffusion bond. Encapsulated powder and sintered components alike are densified to give improved mechanical properties and a reduction in the scatter band of properties.

In this article, the basic science of sintering and hipping is summarized and contrasted. The current state of understanding and modeling of hipping is then reviewed. Models can be classified either as microscopic or macroscopic in their approach. In the microscopic approach, the various mechanisms of densification are analyzed in terms of a single particle and its surroundings. In the macroscopic approach, the compact is treated as a continuous medium. In hipping, although the pressure is isostatic, shrinkage is not generally isotropic, particularly if containment is used. However, the shrinkage can now be well predicted, provided that the material and container properties are accurately known.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. G.W. Greenwood: Proc 17th Annual BICTA Conf., Stratford-Upon-Avon, Sept. 1983. British Investment Casters Trade Association, Alvechurch, 1983, pp. 11:1–11:8.

    Google Scholar 

  2. M.F. Ashby: Proc. Int. Conf. on Hot Isostatic Pressing, Lulea, June 15–17, 1987, T. Garvare, ed., Centek, Lulea, Sweden, 1987, pp. 29–40.

    Google Scholar 

  3. H.V. Atkinson and B.A. Rickinson: Hot Isostatic Processing, Adam Hilger, Bristol, 1991, p. 190.

    Google Scholar 

  4. R.M. German: Sintering Theory and Practice, Wiley, New York, NY, 1996.

    Google Scholar 

  5. H.A. Saller, S.J. Paprocki, R.W. Dayton, and E.S. Hodge: U.S. Patent 687,842 and Canadian Patent 680,160, 1964.

    Google Scholar 

  6. E. Lardner: Metallurgist Mater. Technologist, 1982, vol. 14 (3), pp. 115–18.

    CAS  Google Scholar 

  7. T. Crousatier: Fonderie, 1975, vol. 347, pp. 265–80.

    Google Scholar 

  8. G.E. Wasielewski and N.R. Lindblad: Proc 2nd Int. Conf. Superalloys Processing, TMS-AIME, Champion, PA, 1972, pp. D-1–D-24.

    Google Scholar 

  9. Battelle MCIC Report No. MCIC-77-34, Columbus Laboratories, Battelle, Columbus, OH, 1987.

  10. M.B. Waldron and B.L. Daniell: Sintering, Heyden, London, 1978, p. 62.

    Google Scholar 

  11. S. Quaranta and L.B.P. Antona: Alluminio, 1981, pp. 96–99.

  12. E.A. Olevsky: Mater. Sci. Eng. 1998, vol. R23(2), pp. 41–100.

    Google Scholar 

  13. J.K. Mackenzie and R. Shuttleworth: Proc. Phys. Soc., 1949, vol. 62, pp. 833–52.

    Article  Google Scholar 

  14. R.L. Coble and M.C. Flemings: Metall. Trans., 1971, vol. 2, pp. 409–15.

    CAS  Google Scholar 

  15. P. Murray, E.P. Rogers, and A.E. Williams: Trans. Br. Ceram. Soc., 1954, vol. 53, pp. 474–510.

    CAS  Google Scholar 

  16. G.W. Greenwood: J. Mater. Sci., 1969, vol. 4, pp. 320–22.

    Article  CAS  Google Scholar 

  17. R.S. Nelson, D.J. Mazey, and R.S. Barnes: Phil. Mag., 1965, vol. 11, pp. 91–111.

    CAS  Google Scholar 

  18. G.W. Greenwood: Report of Manchester Symp. on Phase Transformations, Institute of Metals, London, 1968, pp. 103–10.

    Google Scholar 

  19. M.V. Speight and G.W. Greenwood: Phil. Mag., 1964, vol. 9, pp. 683–89.

    Google Scholar 

  20. R.L. Coble: J Appl. Phys., 1970, vol. 41, pp. 4798–4807.

    Article  Google Scholar 

  21. F.W. Crossman and M.F. Ashby: Acta Metall., 1975, vol 23, pp. 425–40.

    Article  CAS  Google Scholar 

  22. D.S. Wilkinson and M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 1277–85.

    Article  CAS  Google Scholar 

  23. W. Schatt, E. Friedrich, and E.P. Wieters: Rev. Powder Met. Phys. Ceram., 1986, vol. 3, pp. 1–111.

    Google Scholar 

  24. B.H. Alexander and R.W. Balluffi: Acta Metall., 1957, vol. 5, pp. 666–77.

    Article  CAS  Google Scholar 

  25. G.W. Greenwood, H. Jones, and J.H. Woodhead: Phil. Mag., 1975, vol 31, pp. 39–46.

    CAS  Google Scholar 

  26. M. Basaran, T.Z. Kattamis, R. Mehrabian, and M.C. Flemings: Metall. Trans., 1973, vol. 4, pp. 2429–34.

    CAS  Google Scholar 

  27. O.H. Kwon and G.L. Messing: Isostatic Pressing Theory and Applications, ASM, Metals Park, OH, 1991, pp. 165–70.

    Google Scholar 

  28. K.G. Ewsuk and G.L. Messing: J. Mater. Sci., 1984, vol. 19, pp. 1530–34.

    Article  CAS  Google Scholar 

  29. J.E. Smugeresky: personal communication with R.M. German, Sandia National Laboratory, CA.

  30. S.H. Lee, J.K. Yang, and D.Y. Kim: J. Am. Ceram. Soc., 1993, vol. 76 (4), pp. 880–84.

    Article  CAS  Google Scholar 

  31. W.B. Li and H.A. Haggblad: Powder Metall., 1997, vol. 40, pp. 279–81.

    CAS  Google Scholar 

  32. D.S. Wilkinson: Ph.D. Thesis, University of Cambridge, Cambridge, United Kingdom, 1977.

    Google Scholar 

  33. F.B. Swinkels, D.S. Wilkinson, E. Arzt, and M.F. Ashby: Acta Metall., 1983, vol. 31, pp. 1829–40.

    Article  CAS  Google Scholar 

  34. E. Arzt: Acta Metall., 1982, vol. 30, pp. 1883–90.

    Article  CAS  Google Scholar 

  35. E. Arzt, M.F. Ashby, and K.E. Easterling: Metall. Trans. A, 1983, vol 14A, pp. 211–21.

    Google Scholar 

  36. A.S. Helle, K.E. Easterling, and M.F. Ashby: Acta Metall., 1985, vol. 33, pp. 2163–74.

    Article  CAS  Google Scholar 

  37. P.S. Gilman and G.H. Gessinger: Powder. Met. Int., 1980, vol. 12, pp. 38–40.

    CAS  Google Scholar 

  38. G.C. Davies and D.R.H. Jones: Acta Mater., 1997, vol. 45, pp. 775–89.

    Article  CAS  Google Scholar 

  39. W.A. Kaysser, M. Aslan, E. Arzt, M. Mitkov, and G. Petzow: Powder Metall., 1988, vol. 31, pp. 63–69.

    CAS  Google Scholar 

  40. S.V. Nair and J.K. Tien: Metall. Trans. A, 1987, vol. 18A, pp. 97–107.

    Google Scholar 

  41. E.K.H. Li and P.D. Funkenbusch: Acta Metall., 1989, vol. 37, pp. 1645–55.

    Article  CAS  Google Scholar 

  42. E.K.H. Li and P.D. Funkenbusch: Metall. Trans. A, 1993, vol. 24A, pp 1345–54.

    CAS  Google Scholar 

  43. B.K. Lograsso and D.A. Koss: Metall. Trans. A, 1988, vol. 19A, pp. 1767–73.

    CAS  Google Scholar 

  44. B.K. Lograsso and T.A. Lograsso: Mater. Manufacturing Processes, 1994, vol. 9, pp. 681–94.

    CAS  Google Scholar 

  45. A.J. Fletcher and S. King: Mater. Sci. Technol., 1996, vol. 12, pp. 477–82.

    CAS  Google Scholar 

  46. M.F. Ashby: HIP487, version HIP6.1, Cambridge University, Cambridge, United Kingdom, 1990, and accompanying documentation on Sintering and Isostatic Pressing Diagrams.

    Google Scholar 

  47. K.S. Oh, D.Y. Kim, and S.J. Cho: J. Am. Ceram. Soc., 1995, vol. 78, pp. 2537–40.

    Article  CAS  Google Scholar 

  48. G.C. Davies and D.R.H. Jones: Scripta Mater., 1997, vol. 37, pp. 1745–51.

    Article  CAS  Google Scholar 

  49. W.B. Li, M.F. Ashby, and K.E. Easterling: Acta Metall., 1987, vol. 35, pp. 2831–42.

    Article  CAS  Google Scholar 

  50. M.F. Ashby, S. Bahk, J. Berk, and D. Turnbull: Progr. Mater. Sci., 1980, vol. 25, pp. 1–34.

    Article  CAS  Google Scholar 

  51. F.F. Lange, L. Atteras, F. Zok, and J.R. Porter: Acta Metall. Mater., 1991, vol. 39, pp. 209–19.

    Article  CAS  Google Scholar 

  52. E. Pagounis, M. Talvitie, and V.K. Lindroos: Mater. Res. Bull., 1996, vol. 31, pp. 1277–85.

    Article  CAS  Google Scholar 

  53. H.N.G. Wadley and D.M. Elzey: Proc. Conf. Composites Design, Manufacture and Application, ICCM VIII, Section 12–21, S.W. Tsai and G.S. Springer, eds., Honolulu, July 15–19, 1991, Society for Advancement of Materials and Process Engineering (SAMPE), 1991, pp. B1–B11.

  54. Y.A. Bahei-el-din and G.J. Dvorak: Acta Metall. Mater., 1995, vol. 43, pp. 2531–39.

    Article  CAS  Google Scholar 

  55. R. Vancheeswaran, D.M. Elzey, J.M. Kunze, and H.N.G. Wadley: Mater. Sci. Eng. A, 1998, vol. 244, pp. 49–57.

    Article  Google Scholar 

  56. M. Khazami-Zadeh and F. Petzoldt: Advances in Powder Metallurgy and Particulate Materials, Metal Powder Industries Federation (MPIF), Princeton, NJ, 1995, vol. 2, pp. 5-125–5-128.

    Google Scholar 

  57. H.A. Kuhn and C.L. Downey: Int. J. Powder Metall., 1971, vol 7, pp. 15–25.

    CAS  Google Scholar 

  58. R.J. Green: Int. J. Mech. Sci., 1972, vol. 14, pp. 215–24.

    Article  Google Scholar 

  59. M. Oyane, S. Shima, and Y. Kono: Bull. Jpn. Inst. Mech. Eng., 1973, vol 16, pp 1254–62.

    CAS  Google Scholar 

  60. S. Shima and M. Oyane: Int. J. Mech. Sci., 1976, vol. 18, pp. 285–91.

    Article  Google Scholar 

  61. M. Abouaf and J.L. Chenot: J. Mecanique Theorique Appl., 1986, vol. 5, pp. 121–40.

    Google Scholar 

  62. M. Abouaf, J.L. Chenot, G. Raisson, and P. Bauduin: Int. J. Num. Methods Eng., 1988, vol. 25, pp. 191–212.

    Article  Google Scholar 

  63. S. Yossifon, Y. Gefen, D. Kalin, and O. Yeheskel: Hot Isostatic Pressing: Theory and Applications: Proc. 2nd Int. Conf. on HIP, R.J. Schaefer and M. Linzer, eds., ASM INTERNATIONAL, Materials Park OH, 1991, pp. 63–71.

    Google Scholar 

  64. S. Shima: Hot Isostatic Pressing: Theory and Applications. Proc. 3rd Conf. on HIP, M. Koizumi, ed., Elsevier Science, Barking, 1992, pp. 11–16.

  65. K.I. Mori, K. Oskada, and T. Hirano: Hot Isostatic Pressing: Theory and Applications: Proc. 3rd Int. Conf. on HIP, M. Koizumi, ed., Elsevier Science, Barking, 1992, pp. 29–34.

  66. A. Nohara, T. Nakagawa, T. Soh, and T. Shinke: Int. J. Num. Methods Eng., 1988, vol. 25, pp. 213–25.

    Article  Google Scholar 

  67. N. Ramakrishnan and V.S. Arunachalam: Progr. Mater. Sci., 1997, vol. 42, pp. 253–61.

    Article  Google Scholar 

  68. J.R.L. Trasorras, M.E. Canga, and W.B. Eisen: Advances in Powder Metallurgy and Particulate Materials, Proc. Conf., C. Lall and A.J. Neupaver, eds., Metal Powder Industries Federation (MPIF), Princeton, NJ, 1994, vol.7, pp. 51–69.

    Google Scholar 

  69. J.F. Zarzour, J.R.L. Trasorras, J. Xu, and J.J. Conway: Advances in Powder Metallurgy and Particulate Materials, M. Phillips and J. Porter, eds., Metal Powder Industries Federation (MPIF), Princeton NJ, 1995, vol. 2, Part 5, pp. 89–112.

    Google Scholar 

  70. J.R.L. Trasorras, R. Parameswaran, J. Xu, R. Anbajagane, and V.B.S. Rachakonda: Advances in Powder Metallurgy and Particulate Materials, M. Phillips and J. Porter, eds., Powder Industries Federation (MPIF), Princeton, NJ, 1995, vol. 2, Part 5, pp. 139–52

    Google Scholar 

  71. D. Bouvard, O. Bouaziz, C. Dellis, and A.G.K. Jinka: Proc. Int. Conf. on Hot Isostatic Pressing, Andover, MA, May 20–22, 1996, ASM, Materials Park, OH, 1996, pp. 53–57.

    Google Scholar 

  72. O. Bouaziz, R. Baccino, C. Dellis, F. Moret, and P. Stutz: Proc. Int. Conf. on Hot Isostatic Prsssing, May 20–22, 1996, Andover, MA, ASM, Material Park, OH, 1996, pp. 145–50.

    Google Scholar 

  73. Y.S. Kwon and K.T. Kim: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 779–82.

    Google Scholar 

  74. A. Kuhne, R. Oberacker, and T. Jungling: in Hot Isostatic Pressing ’93, L. Delaey and H. Tas, eds., Elsevier Sciences B.V., Rotterdam, 1994, pp. 569–80.

    Google Scholar 

  75. H.P. Piehler and D.M. Watkins: Proc. 2nd Int. Conf. on Hot Isostatic Pressing—Theories and Applications, Gaithersburg, MD, June 1989, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 321–27.

    Google Scholar 

  76. A.M. Laptev, V.N. Samarov, and S.V. Podlesny: Powder Metall. Int., 1990, vol. 22, pp. 23–25.

    CAS  Google Scholar 

  77. D. Bouvard and M. Lafer: Advances in Powder Metallurgy, MPIF, Princeton, NJ, 1989, pp. 491–503.

    Google Scholar 

  78. A. Svoboda, L. Bjork, and H.A. Haggblad: in Computational Methods and Experimental Measurements VII, GM Carlomagno and CA Brebbia, eds., Computational Mechanics Publications, Southampton, 1994, pp. 29–39.

    Google Scholar 

  79. A.G.K. Jinka and R.W. Lewis: Computer Methods Appl. Mech. Eng., 1994, vol. 114, pp. 249–72.

    Article  Google Scholar 

  80. M. Khazami-Zadeh, D.G. Seliverstov, F. Petzoldt, and H.D. Kunze: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 761–64.

    Google Scholar 

  81. V. Skorokhod, E. Olevsky, and M. Shtern: Sov. Powder Metall., 1993, vol. 3, pp. 208–13.

    Article  Google Scholar 

  82. A. Svoboda, H.A. Haggblad, and M. Nasstrom: Eng. Computations, 1996, vol. 13, pp. 13–39.

    Article  Google Scholar 

  83. T.F. Zahrah, F. Charron, and L. Christodoulou: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 783–87.

    Google Scholar 

  84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21–23, 1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire OPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D’Heres Cedex, France.

  85. A. Svoboda, H.A. Haggblad, and L. Karlsson: Computer Methods Appl. Mech. Eng., 1997, vol. 148, pp. 299–314.

    Article  Google Scholar 

  86. A. Svoboda, L.E. Lindgren, and A.S. Oddy: Int. J. Num. Methods Eng., 1998, vol. 43, pp. 587–606.

    Article  Google Scholar 

  87. J.K. McCoy, L.E. Muttart, and R.R. Wills: Am. Ceram. Soc. Bull., 1985, vol. 64, pp. 1240–44.

    CAS  Google Scholar 

  88. D. Bouvard and M. Lafer: Powder Metall. Int., 1989, vol. 21, pp. 11–15.

    CAS  Google Scholar 

  89. O. Bouaziz, C. Dellis, and P. Stutz: pp. 67–75 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21–23, 1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D’Heres Cedex, France.

  90. K.T. Kim and Y.C. Jeon: pp. 77–86 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21–23, 1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D’Heres Cedex, France.

  91. P. Stutz, R. Aryanpour, O. Bouaziz, and C. Dellis: pp. 113–22 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21–23, 1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D’Heres Cedex, France.

  92. L. Sanchez, E. Ouedraogo, P. Stutz, and C. Dellis: pp. 295–304 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21–23, 1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D’Heres Cedex, France.

  93. C. Dellis, O. Bouaziz, R. Baccino, and F. Moret: pp. 305–14 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21–23, 1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D’Heres Cedex, France.

  94. W.B. Eisen, O. Bouaziz, and C. Dellis: pp. 325–34 in Ref. 84. Proc Int. Workshop on Modelling of Metal Powder Forming Processes, Grenoble, July 21–23, 1997, organized by Institut National Polytechnique de Grenoble, Universite Joseph Fourier, CNRS, and CEA/CEREM. Available from Professor Bouvard, Directeur du Laboratoire GPM2, ENSPG, Domaine Universitaire, BP46, 38402, Saint Martin-D’Heres Cedex, France.

  95. E. Olevsky, S. Van Dyck, L. Froyen, and L. Delaey: Proc. Int. Conf. on Hot Isostatic Pressing, May 20–22, 1996, Andover, MA, F.H. Froes, J. Hebeisen, and R. Widmer, eds., ASM, Materials Park, OH, 1996, pp. 63–67.

    Google Scholar 

  96. J.M. Duva and P.D. Crow: Acta Metall., 1992, vol. 40, pp. 31–35.

    Article  CAS  Google Scholar 

  97. W.B. Li and K.E. Easterling: Powder Metall., 1992, vol. 35, pp. 47–52.

    CAS  Google Scholar 

  98. E. Olevsky, M. Shtern, and V. Skorohod: Proc. Int. Conf. on Hot Isostatic Pressing, Antwerp, 1993, L. Delaey and H. Tas, eds., Elsevier Science B.V., Amsterdam, 1994, pp. 45–52.

    Google Scholar 

  99. A.G.K. Jinka: J. Mater. Processing Technol., 1996, vol. 57, pp. 382–92.

    Article  Google Scholar 

  100. A.L. Maximenko, E.A. Olevsky, Y.A. Panfilov, M.B. Shtern, and E.A. Yurchenko: Proc. Int. Conf. on Hot Isostatic Pressing, Antwerp, 1993, L. Delaey and H. Tas, eds., Elsevier Science B.V., Amsterdam, 1994, pp. 61–67.

    Google Scholar 

  101. H.N. Wadley, R.J. Schaefer, A.H. Khan, M.F. Ashby, R.B. Clough, Y. Geffen, and J.J. Wlassich: Acta Metall., 1991, vol. 39, pp. 979–86.

    Article  CAS  Google Scholar 

  102. R.M. McMeeking: Int. J. Mech Sci., 1992, vol. 34, pp. 53–62.

    Article  Google Scholar 

  103. J. Besson and M. Abouaf: Int. J. Solids Struct., 1991, vol. 28, pp. 691–702.

    Article  Google Scholar 

  104. J. Xu and R.M. McMeeking: Int. J. Mech. Sci., 1992, vol. 34, pp. 167–74.

    Article  Google Scholar 

  105. J.K. McCoy and R.R. Wills: Acta Metall., 1987, vol. 35, pp. 577–85.

    Article  CAS  Google Scholar 

  106. J. Besson and M. Abouaf: J. Am. Ceram. Soc., 1992, vol. 75, pp. 2165–72.

    Article  CAS  Google Scholar 

  107. R.M. Govindarajan and N. Aravas: Proc. Int. Conf on Hot Isostatic Pressing, Antwerp, 1993, L. Delaey and H. Tas, eds., Elsevier Science B.V., Amsterdam, 1994, pp. 29–36.

    Google Scholar 

  108. T.F. Zarah, F. Charron, and L. Christodoulou: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 783–87.

    Google Scholar 

  109. D. Abondance, R. Baccino, F. Bernier, F. Moret, J.M. de Monicault, D. Guichard, P. Stutz, and D. Bouvard: Proc. Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 797–800.

    Google Scholar 

  110. A.G.K. Jinka, M. Bellet, and C. Fourment: Powder Metallurgy World Congress, Les Editions de Physique, Les Ulis, France, 1994, EPMA, Shrewsbury, 1994, vol. I, pp. 793–96.

    Google Scholar 

  111. E. Olevsky, A. Maximenko, S. Van Dyck, L. Froyen, L. Delaey, and L. Buekenhout: Int. J. Solids Struct., 1998, vol. 35, pp. 2283–303.

    Article  Google Scholar 

  112. K.T. Kim, Y.S. Kwon, and H.G. Kim: Int. J. Mech. Sci., 1997, vol. 39, pp. 1011–22.

    Article  Google Scholar 

  113. Y.S. Kwon and K.T. Kim: J. Eng. Mater. Technol., 1996, vol. 118, pp. 449–55.

    Google Scholar 

  114. Y.S. Kwon and K.T. Kim: J. Eng. Mater. Technol., 1996, vol. 118, pp. 471–77.

    CAS  Google Scholar 

  115. L.T. Kuhn and R.M. McMeeking: Int. J. Mech. Sci., 1992, vol. 34, pp 563–73.

    Article  Google Scholar 

  116. P. Sofronis and R.M. McMeeking: J. Appl. Mech., 1992, vol. 59, pp. 588–95.

    Google Scholar 

  117. M.C. Song, H.G. Kim, and K.T. Kim: Int. J. Mech. Sci, 1996, vol. 38 (11), pp. 1197–1208.

    Article  Google Scholar 

  118. R.E. Dutton, S.L. Semiatin, and R.L. Goetz: Mater. Sci. Eng. A, 1996, vol. 221 (1–2), pp. 85–93.

    Google Scholar 

  119. S. Schuler, B. Derby, M. Wood, and C.M. Ward-Close: Key Eng. Mater., 1997, vol. 127, pp. 351–58.

    Article  Google Scholar 

  120. E. Olevsky, H.J. Dudek, and W.A. Kaysser: Acta Mater., 1996, vol. 44, pp. 707–13.

    Article  CAS  Google Scholar 

  121. E. Olevsky, H.J. Dudek, and W.A. Kayserr: Acta Mater., 1996, vol. 44, pp. 715–24.

    Article  CAS  Google Scholar 

  122. M.C. Zhang, M.C. Luo, and F.C. Zeng: J. Mater. Processing Technol., 1997, vol. 72, pp. 262–66.

    Article  Google Scholar 

  123. H.P. Buchkremer, R. Hecker, D. Stover, and H. Raes: Proc 2nd Int. Conf. on Hot Isostatic Pressing: Theory and Applications, Gaithersburg, MD, June 7–9, 1989, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 349–54.

    Google Scholar 

  124. H.N.G. Wadley, A.H. Kahn, Y. Geffen, and M. Mester: Proceedings of Review of Progress in Quantitative Nondestructive Evaluation. D.O. Thompson and D.E. Chiment, eds., Plenum, New York, NY, 1988, vol. 7B, pp. 1589–98.

    Google Scholar 

  125. A.H. Kahn, M.A. Mester, and H.N.G. Wadley: Proc 2nd Int. Conf. on Hot Isostatic Pressing; Theory and Applications, Gaithersburg, MD, June 7–9, 1989, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 341–48.

    Google Scholar 

  126. R.J. Schaefer and G.M. Janowski: Acta Metall. Mater., 1992, vol. 40, pp. 1645–51.

    Article  CAS  Google Scholar 

  127. D.A. Stubbs and R.E. Dutton: JOM, 1996, vol. 48, pp. 29–31.

    CAS  Google Scholar 

  128. H.R. Piehler and D.P. DeLo: Progr. Mater. Sci., 1997, vol. 42, pp. 263–76.

    Article  CAS  Google Scholar 

  129. R.M. German and A. Bose: Mater. Sci. Eng., 1989, vol. A107, pp. 107–16.

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. the Department of Engineering Materials, The University of Sheffield, S1 3JD, Sheffield, United Kingdom

    H. V. Atkinson

  2. Bodycote HIP Limited, S41 9ED, Chesterfield, United Kingdom

    S. Davies (Business Development Manager)

Authors
  1. H. V. Atkinson
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Davies
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Atkinson, H.V., Davies, S. Fundamental aspects of hot isostatic pressing: An overview. Metall Mater Trans A 31, 2981–3000 (2000). https://doi.org/10.1007/s11661-000-0078-2

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11661-000-0078-2

Keywords

Search

Navigation