Skip to main content
SpringerLink
Log in

Angular Bend Half Mode Substrate Integrated Waveguide (HMSIW) Based Band-Pass Filter with Multiple Transmission Zeroes

  • Published:
Wireless Personal Communications Aims and scope Submit manuscript

Abstract

Design methodology of 90° bend half mode substrate integrated waveguide (HMSIW) band pass filter (BPF) is presented in this paper. Edge wall reflections caused due to the waveguide bend has been minimized by providing 135° bend within the waveguide via wall. Array of reactive longitudinal periodic structures are integrated over the HMSIW BPF to obtain transmission zeroes within the pass-band. The elemental properties such as gap between the periodic structure from via wall, gap between group of periodic elements and gap between elemental periodic slots are analysed to formulate their effect over the transmission bandwidth and the stop-band attenuation for each modes of the BPF. Bandwidth > 2 GHz with insertion loss < 1 dB is achieved within all modes of the BPF. The measured results are compared with the simulated outcomes and the concept is validated.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Wu, K., Deslandes, D., & Cassivi, Y. (2003). The substrate integrated circuits—a new concept for high-frequency electronics and optoelectronics. In Proceedings of 6th international conference on Telecomm in Modern Sat Cable Broadc Service 2003 (Vol. 1(10), pp. III–X).

  2. Bozzi, M., Xu, F., Deslandes, D., & Wu, K. (2017). Modeling and design considerations for substrate integrated waveguide circuits and components. In Proceedings of 8th international conference on Telecomm in Modern Sat, Cable, Broadc Service (TELSIKS), Serbia, Nis 2007 (Vol. 1(9), pp. 26–28).

  3. Hong, W., Lieu, B., Wang, Y., Lai, Q., Tang, H., & Yin, X. X. (2006). Half mode substrate integrated waveguide: A new guided wave structure for microwave and millimeter wave applications. In Proceedings of 14th international conference on Terrahertz Electronics 2006; (Vol. 9, pp. 219–219).

  4. Zhong, C. L., Xu, J., Yu, Z. Y., Wang, M. Y., & Lee, J. H. (2008). Half mode substrate integrated waveguide broadband band pass filter. Progress in Electromagnetics Research, 4(4), 131–138.

    Article  Google Scholar 

  5. Yang, H., Sun, H., & Lv, X. (2004). A novel MMW bandpass filter fitting the waveguide bend structure. Proceedings of Asia Pacific Radio Science Conference, 1(8), 275–277.

    Google Scholar 

  6. Shang, X., Ke, M., Wang, Y., & Lancaster, M. J. (2011). Micromachined W-band waveguide and filter with two embedded H-plane bends. IET Microwaves, Antennas and Propagation, 5(02), 334–339.

    Article  Google Scholar 

  7. Sharma, A., & Inaniya, P. K. (2015). Elliptical and circular rods based bandpass filter with 45 degree bend in waveguide for different dielectric rods structure using photonic crystal. In Proceedings of international conference on computing communication control and automation (pp. 234–237).

  8. Cheng, Y., Hong, W., & Wu, K. (2007). Half mode substrate integrated waveguide (HMSIW) directional filter. IEEE Microwave and Wireless Propagation Letters, 17(7), 504–506.

    Article  Google Scholar 

  9. Ho, M. H., & Li, C. S. (2013). Novel balanced bandpass filters using substrate integrated half mode waveguide. IEEE Microwave and Wireless Components Letters, 23(2), 78–80.

    Article  Google Scholar 

  10. Huang, L., Robertson, I. D., & Yuan, N. (2013). Compact half mode substrate integrated waveguide bandpass filters with capacitively loaded complementary split ring resonators. Microwave and Optical Technology Letters, 55(7), 1602–1606.

    Article  Google Scholar 

  11. Wu, L. S., Zhou, X. L., Yin, W. Y., Liu, C. T., Zhou, L., Mao, J. F., et al. (2010). A new type of periodically loaded half-mode substrate integrated waveguide and its applications. IEEE Transactions on Microwave Theory and Techniques, 58(4), 882–893.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Electronics and Communication Engineering, Dr. B. C. Roy Engineering College, Durgapur, India

    Sourav Moitra, Ranjan Dey & Chandan Kumar Ghosh

Authors
  1. Sourav Moitra
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ranjan Dey
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Chandan Kumar Ghosh
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Sourav Moitra or Chandan Kumar Ghosh.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Moitra, S., Dey, R. & Ghosh, C.K. Angular Bend Half Mode Substrate Integrated Waveguide (HMSIW) Based Band-Pass Filter with Multiple Transmission Zeroes. Wireless Pers Commun 104, 259–267 (2019). https://doi.org/10.1007/s11277-018-6018-5

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11277-018-6018-5

Keywords

Search

Navigation