Skip to main content
Log in

Improved luminescence intensity and stability of thermal annealed ZnO incorporated Alq3 composite films

  • Original Article
  • Published:
Journal of Fluorescence Aims and scope Submit manuscript

Abstract

The 30 wt% of ZnO (weight percentage of ZnO has been optimised) incorporated tris- (8-hydroxyquinoline)aluminum (Alq3) has been synthesised and coated on to glass substrates using dip coating method. The structural and optical properties of the Alq3/ZnO composite film after thermal annealing from 50 to 300 °C insteps 50° has been studied and reported. XRD pattern reveals the presence of crystalline ZnO in all the annealed films. The films annealed above 150 °C reveal the presence of crystalline Alq3 along with crystalline ZnO. The FTIR spectra confirm the presence of hydroxyquinoline and ZnO vibration in all the annealed composite films. The composite films annealed above 150 °C show a partial sublimation and degradation of hydroxyquinoline compounds. The ZnO incorporated composite films (Alq3/ZnO) exhibit two emission peaks, one corresponding to ZnO at 487 nm and another at 513 nm due to Alq3. The films annealed at 200 °C exhibit maximum photoluminescence (PL) intensity than pristine film at 513 nm when excited at 390 nm.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Kim TS, Kim DH, Im H-J, Shimada K, Kawajiri R, Okubo T, Murata H, Mitani T (2004) Improved lifetime of an OLED using aluminum (III) tris (8-hydroxyquinolate). Sci Technol Adv Mater 5:331–37

    Article  CAS  Google Scholar 

  2. Tang CW, VanSlyke SA (1987) Organic electroluminescent diodes. Appl Phys Lett 51:913–15

    Article  CAS  Google Scholar 

  3. Wang MH, Sawada Y, Saito K, Horie S, Uchida T, Ohtsuka M, Seki S, Kobayashi S, Arii T, Kishi A, Takahashi T, Nishimoto Y, Wakimoto T, Monzen K, Kashima I, Nishikiori T, Sun LX, Ozao R (2007) Thermal change of Alq3, tris(8-hydroxyquinolinato) aluminum(III) studied by Tg and XRD-DSC. J Therm Anal Calorim 89:363–66

    Article  Google Scholar 

  4. Thangaraju K, Kumar J, Amaladass P, Mohanakrishnan AK, Narayanan V (2006) Study on photoluminescence from tris-8-hydroxyquinoline aluminium thin films and influence of light. Appl Phys Lett 89:082106–3

    Article  Google Scholar 

  5. Djurisic AB, Kwong CY, Guo WL, Lau TW, Li EH, Kwok HS, Lam LSM, Chan WK (2002) Spectroscopic ellipsometry of the optical functions of tris (8-hydroxyquinoline) Aluminium (Alq3). Thin Solid Films 416:233–41

    Article  CAS  Google Scholar 

  6. Wang M-H, Konya T, Yahata M, Sawada Y, Kishi A, Uchida T, Lei H, Hoshi Y, Sun L-X (2010) Thermal change of organic light-emitting Alq3 thin films. J Therm Anal Calorim 99:117–22

    Article  CAS  Google Scholar 

  7. Colle M, Gmeiner J, Miliu W, Hillebrecht H, Brutting W (2003) Preparation and characterization of blue-luminescent Tris(8- hydroxyquinoline)- aluminum (Alq3). Adv Funct Mater 13:108–12

    Article  CAS  Google Scholar 

  8. Colle M, Brutting W (2004) Thermal, structural and photophysical properties of the organic semiconductor Alq3. Phys Status Solidi 201:1095–1115

    Article  Google Scholar 

  9. Xu MS, Xu JB (2005) Visualization of thermally-activated degradation pathways of tris(8- hydroxyquinoline) aluminum thin films for electroluminescence application. Thin Solid Films 49:317–22

    Article  Google Scholar 

  10. Kong HJ, Park JW, Kim YM (2013) Integration of organic LEDs with inorganic LEDs for a hybrid lighting system. Semicond Sci Technol 28:015011

    Article  Google Scholar 

  11. Uthirakumar P, Kang JH, Ryu JH, Hong C-H (2011) Synthesis and improved luminescence properties of OLED/ZnO hybrid materials. Vacuum 86:254–60

    Article  Google Scholar 

  12. Mitzi DB (2001) Thin-film deposition of Organic-Inorganic hybrid materials. Chem Mater 13:3283–98

    Article  CAS  Google Scholar 

  13. Chiang C-L, Chang R-C, Chiu Y-C (2007) Thermal stability and degradation kinetics of novel organic/inorganic epoxy hybrid containing nitrogen/silicon/phosphorus by sol–gel method. Thermochimica Acta 453:97–104

    Article  CAS  Google Scholar 

  14. Wadeasa A, Tzamalis G, Sehati P, Nur O, Fahlman M, Willander M, Berggren M, Crispin X (2010) Solution processed ZnO nanowires/polyfluorene heterojunctions for large area lightening. Chem Phys Lett 490:200–4

    Article  CAS  Google Scholar 

  15. Zhang T, Xu Z, Qian L, Tao DL, Teng F, Xu XR (2006) Influence of ZnO nanorod on the luminescent and electrical properties of fluorescent dye-doped polymer nanocomposite. Opt Mater 29:216–19

    Article  CAS  Google Scholar 

  16. Cuba M, Muralidharan G (2014) Enhanced luminescence properties of hybrid Alq3/ZnO (organic/inorganic) composite films. J Lumin 156:1–7

    Article  CAS  Google Scholar 

  17. Cuba M, Rathinavalli U, Thangaraju K, Muralidharan G (2014) Synthesis and optical properties of ZnO incorporated Tris-(8-hydroxyquinoline)aluminium. J Lumin 153:188–93

    Article  CAS  Google Scholar 

  18. Li H, Zhang F, Wang Y, Zhang D (2003) Synthesis and characterization of tris-(8-hydroxyquinoline) aluminium. Mater Sci Eng B 100:40–6

    Article  Google Scholar 

  19. Cuba M, Muralidharan G (2015) Effect of thermal annealing on the structural and optical properties of tris-(8-hydroxyquinoline)aluminum(III) (Alq3) films. Luminescence 30:352–357

    Article  CAS  PubMed  Google Scholar 

  20. Muhammada FF, Sulaiman K (2011) Effects of thermal annealing on the optical, spectroscopic, and structural properties of tris(8-hydroxyquinolinate)gallium films grown on quartz substrates. Mater Chem Phys 129:1152–8

    Article  Google Scholar 

  21. Kushto GP, Iizumi Y, Kido J, Kafafi ZH (2000) A Matrix-isolation spectroscopic and theoretical investigation of tris(8-hydroxyquinolinato)aluminum(III) and tris(4-methyl-8-hydroxyquinolinato)aluminum(III). J Phys Chem A 104:3670–80

    Article  CAS  Google Scholar 

  22. Lu H-x, Yu Z, X-j CD-l, Xu ZL-w, H-l YD-y, Wang H- l, Hang R (2011) Controllable synthesis of spindle-like ZnO nanostructures by a simple low-temperature aqueous solution route. Appl Surf Sci 257:4519–23

    Article  CAS  Google Scholar 

  23. Uthirakumar P, Lee YS, Suh EK, Hong CH (2008) Effect of zinc oxide incorporation on the morphology of tris(8-hydroxyquinoline)aluminum/zinc oxide hybrid nanomaterials. Thin Solid Films 516:7299–305

    Article  CAS  Google Scholar 

  24. Shi Y-W, Shi M-M, Huang J-C, Chen H-Z, Wang M, Liu X-D, Ma Y-G, Xu H, Yang B (2006) Fluorinated Alq3 derivatives with tunable optical properties. Chem Commun 18:1941–43

    Article  Google Scholar 

  25. Credo GM, Winn DL, Buratto SK (2001) Near-field scanning optical microscopy of temperature- and thickness-dependent morphology and fluorescence in Alq3 films. Chem Mater 13:1258–65

    Article  CAS  Google Scholar 

  26. Mott NF, Davis EA (1979) Electronic processes in non-crystalline materials, 2nd edn. Clarendon, Oxford

    Google Scholar 

  27. Chen H, Wu X, Gong L, Ye C, Qu F, Shen G (2010) Hydrothermally grown ZnO micro/nanotube arrays and their properties. Nanoscale Res Lett 5:570–75

    Article  PubMed Central  CAS  Google Scholar 

  28. Grover R, Srivastava R, Rana O, Srivastava AK, Maurya KK, Sood KN, Mehta DS, Kamalasanan MN (2012) Electroluminescence from hybridorganic–inorganic LEDs based on thermally evaporated CdS thin films. J Lumin 32:330–36

    Article  Google Scholar 

  29. Baldacchini G, Baldacchini T, Chiacchiaretta P, Pode RB, Wang Q–M (2009) Morphological phase transitions in Alq3 films. J Lumin 129:1831–34

    Article  CAS  Google Scholar 

  30. Singh R, Kumar J, Singh RK, Kaur A, Sood KN, Rastog RC (2005) Effect of thermal annealing on surface morphology and physical properties of poly(3-octylthiophene) films. Polymer 46:9126–32

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to G. Muralidharan.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Cuba, M., Muralidharan, G. Improved luminescence intensity and stability of thermal annealed ZnO incorporated Alq3 composite films. J Fluoresc 25, 1629–1635 (2015). https://doi.org/10.1007/s10895-015-1649-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10895-015-1649-3

Keywords

Navigation