Abstract
Multiobjective approach for optimization of the discharge flow parameters of viscoelastic frictional granular material in a wedge-shaped hopper with fixed outlet orifice is considered. The discharge time and the discharge flow rate are taken as optimality criteria, while the discharge mass of material and the shape of the hopper are considered as design variables. The discrete concept and numerical discrete element method (DEM) are applied to the analysis of granular flow. The filling problem considered as numerical generation of the initial conditions for discharge flow was initially solved. The presented DEM model was validated by examining the wall pressures and comparing them with the results of classical macroscopic pressure prediction. Variation of optimality criteria and Pareto set is demonstrated by the numerical results. Sensitivity of optimality criteria to interparticle friction is also investigated.
Similar content being viewed by others
References
Allen MP, Tildesley DJ (1991) Computer simulation of liquids. Clarendon, Oxford
Balevičius R, Džiugys A, Kačianauskas R (2004) Discrete element method and its application to the analysis of penetration into granular media. J Civ Eng Manag 10(1):3–14
Balevičius R, Kačianauskas R, Džiugys A, Maknickas A, Vislavičius V (2005) DEMMAT code for numerical simulation of multi-particle dynamics. Inf Technol Valdyn 34(1):71–78
Bardet JP, Vardoulakis I (2001) The asymmetry of stress in granular media. Int J Solids Struct 38:353–367
Campbell CS, Brennen CE (1983) Computer simulation of shear flows of granular material. Mechanics of granular materials: new models and constitutive relations. Elsevier, Amsterdam
Clearly PW, Sawley ML (2002) DEM modelling of industrial granular flows: 3D case studies and the effect of particle shape on hopper discharge. Appl Math Model 26:89–111
Cundall PA (1974) A computer model for rock-mass behaviour using interactive graphics for the input and output of geometric data. Rep. AD/A-001 602, U.S. National Technical Information Service
Cundall PA, Strack ODL (1979) A discrete numerical model for granular assemblies. Geotechnique 29:47–65
Doltsinis I, Kang Z, Cheng G (2005) Robust design of non-linear structures using optimization methods. Comput Methods Appl Mech Eng 194:1779–1795
Džiugys A, Peters BJ (2001) An approach to simulate the motion of spherical and non-spherical fuel particles in combustion chambers. Granul Matter 3(4):231–266
Elaskar SA, Godoy LA, Gray DD, Stiles JM (2000) A viscoplastic approach to model the flow of granular solids. Int J Solids Struct 37:2185–2214
Eibl J, Rombach G (1988) Numerical investigations on discharging silos. In: Proc. 6th International Conference on Numerical Methods in Geomechanics, V1. Balkema, Rotterdam, pp 317–320
Eschenauer HA, Koski J, Osyczka (1990) A multicriteria design optimization. Procedures and applications. Springer, Berlin Heidelberg New York
Ferellec JF, Martinez J, Masson S, Iwashita K (2001) Influence of particle rolling resistance on silo flow in DEM simulations. In: Kishino (ed) Powders and grains. Swets & Zetlinger, Lisse, pp 409–412
Guaita M, Couto A, Ayuga F (2003) Numerical simulation of wall pressure during discharge of granular material from cylindrical silos with eccentric hoppers. Biosyst Eng 85(1):101–109
Gunawan S, Azarm S (2005) Multi-objective robust optimization using a sensitivity region concept. Struct Multidiscipl Optim 29:50–60
Horne RM, Nedderman RM (1976) Analysis of the stress distribution in two-dimensional bins by the method of characteristics. Powder Technol 14:93–102
Iwashita K, Oda M (2000) Micro-deformation mechanism of shear banding process based on modified distinct element. Powder Technol 109:192–205
Kačianauskas R, Kutas R, Maciulevičius D (1992) Multicriteria optimization of pin-jointed structures with overall stability constraints. Int J Numer Methods Eng 34:893–900
Kim Y, de Weck OL (2005) Adaptive weighted-sum method for bi-objective optimization: pareto front generation. Struct Multidiscipl Optim 29:149–158
Langston PA, Tüzün U, Heyes DM (1995a) Discrete element simulation of granular flow in 2D and 3D hoppers: dependence of discharge rate and wall stress on particle interactions. Chem Eng Sci 50(6):967–987
Langston PA, Tüzün U, Heyes DM (1995b) Discrete element simulation of internal stress and flow fields in funnel flow hoppers. Powder Technol 85:153–169
Langston PA, Nikitidis MS, Tüzün U, Heyes DM, Spyrou NM (1997) Microstructural simulation and imaging of granular flows in two- and three-dimensional hoppers. Powder Technol 94:59–72
Langston PA, Al-Awamleh MA, Fraige FY, Asmar BN (2004) Distinct element modeling of non-spherical frictionless particle flow. Chem Eng Sci 59:425–435
Li J, Langston PA, Webb C, Dyakowski T (2004) Flow of sphero-disc particles in rectangular hoppers—a DEM and experimental comparison in 3D. Chem Eng Sci 59:5917–5929
Marler RT, Arora JS (2004) Survey of multi-objective optimization methods for engineering. Struct Multidiscipl Optim 26:369–395
Masson S, Martinez J (2000) Effect of particle mechanical properties on silo flow and stresses from distinct element simulations. Powder Technol 109:164–178
Michalevich VS, Volkovich VL (1982) Computations methods in research and design of complex systems. Nauka, Moscow (in Russian)
Mirghasemi AA, Rothenburg L, Matyas EL (2000) Influence of particle shape on engineering properties of assemblies of two-dimensional polygon-shaped particles. Geotechnique 52(3):209–217
Mroz Z, Sielamovicz I (2003) Deformation zones in granular materials in converging hoppers during filling and emptying processes. Eng Trans 51(4):461–491
Nouguier-Lehon C, Vincens E, Cambou B (2005) Structural changes in granular materials: the case of irregular polygonal particles. Int J Solids Struct 42(24–25):6356–6375
Raji AO, Favier J (2004) Model for the deformation in agricultural and food particulate materials under bulk compressive loading using discrete element method. II: compression of oilseeds. J Food Eng 64:373–380
Sadd MH, Adhikari G, Carosso F (2000) DEM simulation of wave propagation in granular materials. Powder Technol 109:222–233
Simpson TW, Booker AJ, Ghosh D, Giunta AA, Koch PN, Yang R-J (2004) Approximation methods in multidisciplinary analysis and optimization: a panel discussion. Struct Multidiscipl Optim 27:302–313
Takeuchi S, Wang X, Rhodes MJ (2005) Discrete element study of particle circulation in a 3-D spouted bed. Chem Eng Sci 60:1267–1276
Tanaka K, Nishida M, Kunimochi T, Takagi T (2002) Discrete element simulation and experiment for dynamic response of two-dimensional granular matter to the impact of a spherical projectile. Powder Technol 124:160–173
Tejchman J, Gudehus G (1993) Silo-music and silo-quake experiments and a numerical Cosserat approach. Powder Technol 76(2):201–212
Tejchman J, Ummenhofer T (2000) Bedding effects in bulk solids in silos: experiments and a polar hypoplastic approach. Thin-Walled Struct 37:333–361
Thornton C (1989) Application of DEM to process engineering problems in DEM. In: 1st US Conference, Colorado School of Mines Press, pp 87–100
Walton OR (1983) Particle–dynamic calculations of shear flow. Mechanics of granular materials: new models and constitutive relations. In: Jenkins JT, Satake M (eds), Elsevier, Amsterdam, pp 327–338
Wu Y-H, Collinson R (2000) Determination of velocity and stress discontinuities in quasi-static granular flows. Anziam J 42(E):C1558–C1579
Zavadskas EK, Kaklauskas A, Turskis Z (1997) Multicriteria decision-making system for building refurbishment. Statyba (Civil Engineering) 3(4):62–68
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Balevičius, R., Kačianauskas, R., Mroz, Z. et al. Discrete element method applied to multiobjective optimization of discharge flow parameters in hoppers. Struct Multidisc Optim 31, 163–175 (2006). https://doi.org/10.1007/s00158-005-0596-z
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-005-0596-z