Skip to main content
Log in

Numerical study of the influences of different patterns of the building and green space on micro-scale outdoor thermal comfort and indoor natural ventilation

  • Research Article
  • Architecture and Human Behavior
  • Published:
Building Simulation Aims and scope Submit manuscript

Abstract

Citizens could enjoy a healthy and comfortable living environment if outdoor thermal comfort and sufficient natural ventilation are available in their dwellings. In this paper, numerical studies were performed with the Simulation Platform for Outdoor Thermal Environment (SPOTE) to investigate: (1) the thermal environment and pedestrian thermal comfort of the occupants in the open space with different patterns of the building and green space; (2) the wind pressures on the building facades and the natural ventilation rate of these buildings. The conclusions are summarized as follows: (1) it has been observed that the long facades of building and green space, which are parallel to the prevailing wind direction, can accelerate horizontal vortex airflow at the edges where such airflow could strengthen the convective exchange efficiency of hot air in low altitude and cold air in high altitude, and can obtain thermal comfort and sufficient natural ventilation at the pedestrian level; (2) after a series of simulations and comparisons, the configuration in which buildings are grouped in staggered layout with a centralized green space can provide better ventilation conditions and suitable air movement as a result of attenuated revised standard effective temperature (SET*). This configuration is regarded as the optimum pattern of the building and green space.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • ASHRAE (2001). Physiological principles and thermal comfort. In: ASHRAE Handbook—Fundamentals. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers.

    Google Scholar 

  • Chen H, Ooka R, Kato S (2008). Study on optimum design method for pleasant outdoor thermal environment using genetic algorithms (GA) and coupled simulation of convection, radiation and conduction. Building and Environment, 43: 18–30.

    Article  Google Scholar 

  • Gao C, Lee WL (2011). Evaluating the influence of openings configuration on natural ventilation performance of residential units in Hong Kong. Building and Environment, 46: 961–969.

    Article  Google Scholar 

  • Germano M (2007). Assessing the natural ventilation potential of the Basel region. Energy and Buildings, 39: 1159–1166.

    Article  Google Scholar 

  • Grimmond CSB, Roth M, Oke TR, Au YC, Best M, Betts R, Carmichael G, Cleugh H, Dabberdt W, Emmanuel R, et al. (2010). Climate and more sustainable cities: Climate information for improved planning and management of cities (producers/capabilities perspective). Procedia Environmental Science, 1: 247–274.

    Article  Google Scholar 

  • Haase M, Amato A (2009). An investigation of the potential for natural ventilation and building orientation to achieve thermal comfort in warm and humid climates. Solar Energy, 83: 389–399.

    Article  Google Scholar 

  • Hong B, Lin B, Wang B, Li S (2012). Optimal design of vegetation in residential district with numerical simulation and field experiment. Journal of Central South University, 19: 688–695.

    Article  Google Scholar 

  • Hsieh CM, Chen H, Ooka R, Yoon J, Kato S, Miisho K (2010). Simulation analysis of site design and layout planning to mitigate thermal environment of riverside residential development. Building Simulation, 3: 51–61.

    Article  Google Scholar 

  • Jeong SY, Yoon SH (2012). Method to quantify the effect of apartment housing design parameters on outdoor thermal comfort in summer. Building and Environment, 53: 150–158.

    Article  Google Scholar 

  • Kimura A (2003). Optimization of plant canopy model for reproducing aerodynamic effects of trees: (Part 1) Comparison between the canopy model optimized by the present authors and that proposed by Green. In: Proceedings of Transactions of Architecture Institute of Japan (AIJ), pp. 721–722. (in Japanese)

    Google Scholar 

  • Li AG, Jones PJ (2000). Developments in strategies used for natural and mechanical ventilation in China. Indoor and Built Environment, 9: 65–74.

    Article  Google Scholar 

  • Li C, Li X, Su Y, Zhu Y (2012). A new zero-equation turbulence model for micro-scale climate simulation. Building and Environment, 47: 243–255.

    Article  Google Scholar 

  • Lin B, Li X, Zhu Y, Qin Y (2008). Numerical simulation studies of the different vegetation patterns’ effect on outdoor pedestrian thermal comfort. Journal of Wind Engineering and Industrial Aerodynamics, 96: 1707–1718.

    Article  Google Scholar 

  • Lu Y (2008). Practical Heating and Air Conditioning Design Manual, 2nd edn. Beijing: China Architecture & Building Press. (in Chinese)

    Google Scholar 

  • Mahdavi A, Pröglhöf C (2008). A model-based approach to natural ventilation. Building and Environment, 43: 620–627.

    Article  Google Scholar 

  • MOHURD (2011). Design Standard for Thermal Environment of Urban Residential Areas. Ministry of Housing and Urban-Rural Development of China. (in Chinese).

    Google Scholar 

  • Mochida A, Lun IYF (2008). Prediction of wind environment and thermal comfort at pedestrian level in urban area. Journal of Wind Engineering and Industrial Aerodynamics, 96: 1498–1527.

    Article  Google Scholar 

  • Omori T, Yamaguchi S, Taniguchi H (1998). Accurate Monte Carlo simulation of radiative heat transfer with unstructured grid systems. In: Proceedings of 11th International Symposium on Transport Phenomena, pp. 567–573.

    Google Scholar 

  • Ooka R, Chen H, Kato S (2008). Study on optimum arrangement of trees for design of pleasant outdoor environment using multi-objective genetic algorithm and coupled simulation of convection, radiation and conduction. Journal of Wind Engineering and Industrial Aerodynamics, 96: 1733–1748.

    Article  Google Scholar 

  • Schilling V (1990). A parameterization for modeling the meteorological effects of tall forests—A case study of a large clearing. Boundary-Layer Meteorology, 55: 283–304.

    Article  Google Scholar 

  • Stoakes P, Passe U, Battaglia F (2011). Predicting natural ventilation flows in whole buildings. Part 2: The Esherick House. Building simulation, 4: 365–377.

    Article  Google Scholar 

  • Yin W, Zhang G, Yang W, Wang X (2010). Natural ventilation potential model considering solution multiplicity, window opening percentage, air velocity and humidity in China. Building and Environment, 45: 338–344.

    Article  Google Scholar 

  • Yoshida S, Ooka R, Mochida A, Murakami S, Tominaga Y (2006). Development of three dimensional plant canopy model for numerical simulation of outdoor thermal environment. In: Proceedings of 6th International Conference on Urban Climate (ICUC6).

    Google Scholar 

  • Zhao B, Zeng J (2009). A simple model to study the influence of fluctuating airflow on the effective air exchange rate when using natural ventilation. Building Simulation, 2: 63–66.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Borong Lin.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Hong, B., Lin, B. Numerical study of the influences of different patterns of the building and green space on micro-scale outdoor thermal comfort and indoor natural ventilation. Build. Simul. 7, 525–536 (2014). https://doi.org/10.1007/s12273-014-0167-6

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12273-014-0167-6

Keywords

Navigation