Abstract
This article deals with vibration analysis of clamped (C–C) and freely supported (Fs–Fs), truncated and complete conical shells on elastic foundations with continuously graded volume fraction. The functionally graded material (FGM) properties are assumed to vary continuously through the thickness of the conical shell. First, the basic relations, i.e., the dynamic stability and compatibility equations, of FGM truncated conical shells on the Pasternak-type elastic foundation are obtained. The displacement and Airy stress function are sought depending on a new parameter λ. The parameter λ depends on the geometry of the shell and the loading and boundary conditions. By applying the Galerkin method to the foregoing equations, the dimensionless frequency parameters of FGM conical shells on the Pasternak-type elastic foundation for two boundary conditions are obtained. Furthermore, the parameter λ which is included in the formulae is obtained from the minimization of the dimensionless frequency parameters. Finally, the effects of the stiffness of the foundation, boundary conditions, variations of the conical shell characteristics, and composition profiles on the values of the dimensionless frequency parameters are studied. The results are validated through comparison of obtained values with those in the literature.
Similar content being viewed by others
References
Seide P (1965) On the vibrations of simply supported truncated conical shells. Isr J Technol 3: 50–61
Aganesov LG, Sachenkov AV (1966) Free vibration and stability of conical shells with arbitrary transverse section. Res Theory Plate Shells Kazan State Univ Kazan 4:342–355 (in Russian)
Tani J (1971) Free transverse vibrations of truncated conical shells. Rep Inst High Speed Mech Tohoku Univ Jpn 24: 87–116
Leissa AW (1973) Vibration of shells. NASA SP-288
Irie T, Yamada G, Tanaka K (1984) Natural frequencies of truncated conical shells. J Sound Vib 92: 447–453
Lam KY, Hua L (1999) Influence of boundary conditions on the frequency characteristics of a rotating truncated circular conical shell. J Sound Vib 223: 171–195
Liew KM, Ng TY, Zhao X (2005) Free vibration analysis of conical shells via the element-free kp-Ritz method. J Sound Vib 281: 627–645
Civalek O (2006) An efficient method for free vibration analysis of rotating truncated conical shells. Int J Press Vessel Pip 83: 1–12
Li FM, Kishimoto K, Huang WH (2009) The calculations of natural frequencies and forced vibration responses of conical shell using the Rayleigh–Ritz method. Mech Res Commun 36: 595–602
Koizumi M (1993) The concept of FGM ceramic transactions. Funct Gradient Mater 34: 3–10
Afsar AM, Sekine H (2001) Optimum material distributions for prescribed apparent fracture toughness in thick-walled FGM circular pipes. Int J Press Vessel Pip 78: 471–484
Miyamoto Y, Kaysser WA, Rabin BH, Kawasaki A, Ford RG (1999) Functionally graded materials: design, processing and applications. Chapman Hall, London
Loy CT, Lam KY, Reddy JN (1999) Vibration of functionally graded cylindrical shells. Int J Mech Sci 41: 309–324
Pradhan SC, Loy CT, Lam KY, Reddy JN (2000) Vibration characteristics of functionally graded cylindrical shells under various boundary conditions. Appl Acoust 61: 111–129
Woo J, Mequid SA (2001) Nonlinear analysis of functionally graded plates and shallow shells. Int J Solid Struct 38: 7409–7421
Ng TY, Lam KY, Liew KM, Reddy JN (2001) Dynamic stability analysis of functionally graded cylindrical shells under periodic axial loading. Int J Solid Struct 38: 1295–1309
Patel BP, Gupta MS, Loknath MS, Kadu CP (2005) Free vibration analysis of a functionally graded elliptical cylindrical shells using higher-order theory. Compos Struct 69: 259–270
Batra RC, Jin J (2005) Natural frequencies of a functionally graded anisotropic rectangular plate. J Sound Vib 282: 509–516
Kadoli R, Ganesan K (2006) Buckling and free vibration analysis of functionally graded cylindrical shells subjected to a temperature-specified boundary condition. J Sound Vib 289: 450–480
Najafizadeh MM, Isvandzibaei MR (2007) Vibration of functionally graded cylindrical shells based on higher order shear deformation plate theory with ring support. Acta Mech 191: 75–91
Matsunaga H (2009) Free vibration and stability of functionally graded circular cylindrical shells according to a 2D higher-order deformation theory. Compos Struct 88: 519–531
Zhao X, Lee YY, Liew KM (2009) Thermoelastic and vibration analysis of functionally graded cylindrical shells. Int J Mech Sci 51: 694–707
Naj R, Boroujerdy SM, Eslami MR (2008) Thermal and mechanical instability of functionally graded truncated conical shells. Thin-Walled Struct 46: 65–78
Sofiyev AH (2009) The vibration and stability behaviors of freely supported FGM conical shells subjected to external pressure. Compos Struct 89: 356–366
Tornabene F, Viola E, Inman DJ (2009) 2-D differential quadrature solution for vibration analysis of functionally graded conical, cylindrical shell and annular plate structures. J Sound Vib 328: 259–290
Mahmoudkhani S, Haddadpour H, Navazi HM (2010) Supersonic flutter prediction of functionally graded conical shells. Compos Struct 92: 377–386
Sofiyev AH, Kuruoglu N, Halilov HM (2010) The vibration and stability of non-homogeneous orthotropic conical shells with clamped edges subjected to uniform external pressures. Appl Math Model 34: 1807–1822
Zhao X, Liew KM (2011) Free vibration analysis of functionally graded conical shell panels by a meshless method. Compos Struct 93: 649–664
Pasternak PL (1954) On a new method of analysis of an elastic foundation by means of two foundation constants. Cosudarstvennoe Izdatelstvo Literaturi po Stroitelstvu i Arkhitekture, Moscow, USSR, pp 1–56 (in Russian)
Kerr AD (1964) Elastic and visco-elastic foundation models. J Appl Mech 31: 491–498
Gazizov BG, Zaynashev AM (1973) On the stability of truncated conical shells on an elastic foundation beyond the elasticity limit. Res Theory Plate Shells Kazan State Univ Kazan 10:195–201 (in Russian)
Sun B, Huang Y (1988) The exact solution for the general bending problems of conical shells on the elastic foundation. Appl Math Mech 9: 455–469
Paliwal DN, Pandey RK, Nath T (1996) Free vibration of circular cylindrical shell on Winkler and Pasternak foundation. Int J Press Vessel Pip 69: 79–89
Amabili M, Dalpiaz G (1997) Free vibration of cylindrical shells with non-axisymmetric mass distribution on elastic bed. Meccanica 32: 71–84
Paliwal DN, Pandey RK (1998) The free vibrations of a cylindrical shell on an elastic foundation. J Vib Acoust 120: 63–71
Ng TY, Lam KY (1999) Effects of elastic foundation on the dynamic stability of cylindrical shells. Struct Eng Mech 8: 193–205
Cai JB, Chen WQ, Ye GR, Ding HJ (2000) On natural frequencies of a transversely isotropic cylindrical panel on a Kerr foundation. J Sound Vib 232: 997–1004
Gunawan H, Sato M, Kanie S, Mikami T (2004) Static and free vibration analysis of cylindrical shells on elastic foundation. J Struct Eng JSCE 50A: 25–34
Sheng GG, Wang X (2008) Thermal vibration, buckling and dynamic stability of functionally graded cylindrical shells embedded in an elastic medium. J Reinf Plast Compos 27: 117–134
Shen HS (2009) Postbuckling of shear deformable FGM cylindrical shells surrounded by an elastic medium. Int J Mech Sci 51: 372–383
Shah AG, Mahmood T, Naeem MN, Iqbal Z, Arshad SH (2010) Vibrations of functionally graded cylindrical shells based on elastic foundations. Acta Mech 211: 293–307
Sofiyev AH, Schnack E, Korkmaz A (2009) The vibration analysis of simply supported FGM truncated conical shells resting on two-parameter elastic foundations. IRF’2009 3rd International Conference on Integrity, Reliability and Failure, Porto, Portugal, pp 277–278
Sofiyev AH (2010) Buckling analysis of FGM circular shells under combined loads and resting on the Pasternak type elastic foundation. Mech Res Commun 37: 539–544
Pitakthapanaphong S, Busso EP (2002) Self-consistent elasto-plastic stress solutions for functionally graded material systems subjected to thermal transients. J Mech Phys Solid 50: 695–716
Jin ZH, Batra RC (1996) Stresses intensity relaxation at the tip of an edge crack in a functionally graded material subjected to a thermal shock. J Therm Stress 19: 317–339
Reddy JN, Chin CD (1998) Thermal–mechanical analysis of functionally graded cylinders and plates. J Therm Stress 21: 593–626
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sofiyev, A.H., Kuruoglu, N. Vibration analysis of FGM truncated and complete conical shells resting on elastic foundations under various boundary conditions. J Eng Math 77, 131–145 (2012). https://doi.org/10.1007/s10665-012-9535-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10665-012-9535-3