Summary
A theoretical analysis for the plane-strain compression of a multi-layer strip of rigid perfectly/plastic materials with Tresca friction conditions at the platen surfaces and bi-material interfaces is described. The analysis focuses on an effect of the input data on the frictional regime (sticking/sliding) at the bi-material interfaces and on qualitative behavior of the solution. Of particular interest is the prediction of a domain in a parametric space corresponding to the process of compression with a proportional decrease in the thickness of all layers.
Similar content being viewed by others
References
R. Hill (1950) The mathematical theory of plasticity Clarendon Press Oxford Occurrence Handle0041.10802
N. S. Das J. Banerjee I. F. Collins (1979) ArticleTitlePlane strain compression of rigid-perfectly plastic strip between parallel dies with slipping friction Trans. ASME J. Appl. Mech. 46 317–321 Occurrence Handle0419.73033
I. F. Collins S. A. Meguid (1977) ArticleTitleOn the influence of hardening and anisotropy on the plane-strain compression of thin metal strip Trans. ASME J. Appl. Mech. 44 271–278 Occurrence Handle0378.73031
M. J. Adams B. J. Briscoe G. M. Corfield C. J. Lawrence T. D. Papathanasiou (1997) ArticleTitleAn analysis of the plane-strain compression of viscoplastic materials Trans. ASME J. Appl. Mech. 64 420–424 Occurrence Handle0900.73180 Occurrence Handle10.1115/1.2787325
S. Alexandrov G. Mishuris W. Miszuris (2000) ArticleTitlePlanar flow of a three-layer plastic material through a converging wedge-shaped channel: Part 1 – analytical solution Europ. J. Mech. A/Solids 19 811–825 Occurrence Handle1789625 Occurrence Handle10.1016/S0997-7538(00)01105-0 Occurrence Handle0992.74016
S. Alexandrov G. Mishuris (2003) ArticleTitleAxisymmetric plastic flow of a bilayer material through a conical channel Dokl. Phys. 48 244–246 Occurrence Handle10.1134/1.1581321
R. E. Sliwa (1991) ArticleTitleA test determining the ability of different materials to undergo simultaneous plastic deformation to produce metal composites Mater. Sci. Engng. A135 259–265 Occurrence Handle10.1016/0921-5093(91)90573-6
S. Alexandrov G. Mishuris W. Miszuris (2001) ArticleTitleAn analysis of the plane-strain compression of a three-layer strip Arch. Appl. Mech. 71 555–566 Occurrence Handle10.1007/s004190100162 Occurrence Handle1034.74016
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Alexandrov, S., Tzou, G.Y. & Huang, M.N. Plane strain compression of a rigid/perfectly plastic multi-layer strip between parallel platens. Acta Mechanica 184, 103–120 (2006). https://doi.org/10.1007/s00707-006-0327-6
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-006-0327-6