Abstract
Two micromechanics models for three-dimensional (3-D) opencell foams are presented. In the first model, an energy method based on Castigliano’s second theorem is utilized. The analysis is performed on a tetrakaidecahedral unit cell, which is subjected to compression on its two opposite square faces. The thirty-six struts of the unit cell are treated as uniform slender beams undergoing linearly elastic deformations, and the twenty-four vertices as rigid joints. All three deformation mechanisms of the cell struts (i.e., stretching, shearing and bending) possible under the specified loading are incorporated, and four different strut cross section shapes (i.e., circle, square, equilateral triangle and Plateau border) are treated in a unified manner, unlike in earlier models. Two closed-form formulas for determining the effective Young’s modulus and Poisson’s ratio of open-cell foams are provided. These two formulas are derived by using the composite homogenization theory and contain more parameters than those included in existing models. The new formulas explicitly show that the elastic properties of the foam depend on the relative foam density, the shape and size of the strut cross section, and the Young’s modulus and Poisson’s ratio of the strut material. The predicted values of the effective Young’s modulus and Poisson’s ratio for carbon foams compare favorably with those based on existing models and experimental data.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Hilyard N C. Mechanics of Cellular Plastics. Applied Science, London, 1982.
Gibson L J, Ashby M F. Cellular Solids: Structures and Properties. 2nd ed. Cambridge University Press, Cambridge, 1997.
Ashby M F, Evans A, Fleck N A, et al. Metal Foams: A Design Guide. Butterworth-Heinemann, Woburn (MA), 2000.
Hall R B, Hager J W. Performance limits for stiffness-critical graphitic foam structures, part I: Comparisons with high-modulus foams, refractory alloys and graphite-epoxy composites. J Compos Mater, 30: 1922–1937, 1996.
Roy A K, Pullman D, Kearns K M. Experimental methods for measuring tensile and shear stiffness and strength of graphitic foam. Proceedings of the 43rd International SAMPE Symposium and Exhibition, Anaheim, California, USA, May 31–June 4, 1998.
Sihn S, Roy A K. Modeling and stress analysis of open-cell carbon foam. Proceedings of the 46th International SAMPE Symposium and Exhibition, Long Beach, CA, USA, May 6–10, 2001.
Warren W E, Kraynik A M. The linear elastic properties of open-cell foams. ASME J Appl Mech, 55: 341–346, 1988.
Warren W E, Kraynik A M. The linear elastic behavior of a low-density Kelvin foam with open cells. ASME J Appl Mech, 64: 787–795, 1997.
Anderson D P, Kearns K M, Klett J W, et al. Microcellular graphite carbon foams for next generation structures and thermal management. Proceedings of the 2000 IEEE Aerospace Conference, Vol. 4, Big Sky, Montana, USA, March 18–25, 2000.
Weaire D, Fortes M A. Stress and strain in liquid and solid foams. Adv Phys, 43: 685–738, 1994.
Dement’ev A G, Tarakanov O G. Effect of cellular structure on the mechanical properties of plastic foams. Polymer Mechanics, 6: 519–525, 1970.
Dement’ev A G, Tarakanov O G. Model analysis of the cellular structure of plastic foams of the polyurethane type. Polymer Mechanics, 6: 744–749, 1970.
Choi J B, Lakes R S. Analysis of elastic modulus of conventional foams and of re-entrant foam materials with a negative Poisson’s ratio. Int J Mech Sci, 37: 51–59, 1995.
Chou T W. Microstructural Design of Fiber Composites. Cambridge University Press, Cambridge, 1992.
Van der Burg M W D, Shulmeister V, Van der Geissen E, et al. On the linear elastic properties of regular and random open-cell foam models. J Cell Plastics, 33: 31–54, 1997.
Grenestedt J L, Tanaka K. Influence of cell shape variations on elastic stiffness of closed cell cellular solids. Script Mater, 40: 71–77, 1999.
Roberts A P, Garboczi E J. Elastic moduli of model random three-dimensional closed-cell cellular solids. Acta Mater, 49: 189–197, 2001.
Roberts A P, Garboczi E J. Elastic properties of model random threedimensional open-cell solids. J Mech Phys Solids, 50: 33–55, 2002.
Grenestedt J L, Bassinet F. Influence of cell wall thickness variations on elastic stiffness of closed-cell cellular solids. Int J Mech Sci, 42: 1327–1338, 2000.
Simone A E, Gibson L J. Effects of solid distribution on the stiffness and strength of metallic foams. Acta Mater, 46: 2139–2150, 1998.
Simone A E, Gibson L J. The effects of cell face curvature and corrugations on the stiffness and strength of metallic foams. Acta Mater, 46: 3929–3935, 1998.
Grenestedt J L. Influence of wavy imperfections in cell walls on elastic stiffness of cellular solids. J Mech Phys Solids, 46: 29–50, 1998.
Gao X L, Mall S. Variational solution for a cracked mosaic model of woven fabric composites. Int J Solids Struct, 38: 855–874, 2001.
Roy A K, Sihn S. Development of a three-dimensional mixed variational model for woven composites I: mathematical formulation. Int J Solids Struct, 38: 5935–5947, 2001.
Gao X L, Li K. Damaged mosaic laminate model of woven fabric composites with transverse yarn cracking and interface debonding. Compos Sci Tech, 62: 1821–1834, 2002.
Gao X L, Li K, Mall S. A mechanics-of-materials model for predicting Young’s modulus of damaged woven fabric composites involving three damage modes. Int J Solids Struct, 40: 981–999, 2003.
Cook R D, Young W C. Advanced Mechanics of Materials. 2nd ed. Prentice Hall, Upper Saddle River (NJ), 1999.
Hashin Z. Analysis of composite materials-a survey. ASME J Appl Mech, 50: 481–505, 1983.
Hashin Z. Analysis of orthogonally cracked laminates under tension. ASME J Appl Mech, 54: 872–879, 1987.
Glaessgen E H, Phillips D R, Iesulauro E, et al. A multiscale approach to modeling fracture in metallic materials containing nonmetallic inclusions. AIAA-2003-1616, American Institute of Aeronautics and Astronautics, Reston, VA, 2003.
Nygards M, Gudmundson P. Three-dimensional periodic Voronoi grain models and micromechanical FE-simulations of a two-phase steel. Comp Mater Sci, 24: 513–519, 2002.
Hibbitt, Karlson, Sorenson, Inc. ABAQUS Theory and User’s Manuals. Version 6.3. Hibbitt, Karlson and Sorenson, Inc., Pawtucket, RI, 2002.
Li K, Gao X L, Roy A K. Micromechanics model for three-dimensional opencell foams using a tetrakaidecahedral unit cell and Castigliano’s second theorem. Compos Sci Tech, 63: 1769–1781, 2003.
Li K, Gao X L, Roy A K. Micromechanical analysis of three-dimensional opencell foams using the matrix method for spatial frames. Composites: Part B, 36: 249–262, 2005.
Silva M J, Hayes W C, Gibson L J. The effects of non-periodic microstructure on the elastic properties of two-dimensional cellular solids. Int J Mech Sci, 37: 1161–1177, 1995.
Silva M J, Gibson L J. The effects of non-periodic microstructure and defects on the compressive strength of two-dimensional cellular solids. Int J Mech Sci, 39: 549–563, 1997.
Li K, Gao X L, Subhash G. Effects of cell shape and cell wall thickness variations on the elastic properties of two-dimensional cellular solids. Int J Solids Struc, 42: 1777–1795, 2005.
Laroussi M, Sab K, Alaoui A. Foam mechanics: nonlinear response of an elastic 3D-periodic microstructure. Int J Solids Struc, 39: 3599–3623, 2002.
Kanit T, Forest S, Galliet I, et al. Determination of the size of the representative volume element for random composites: Statistical and numerical approach. Int J Solids Struc, 40: 3647–3679, 2003.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2012 Higher Education Press, Beijing and Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Li, K., Gao, XL. (2012). Micromechanical Modeling of Three-dimensional Open-cell Foams. In: Advances in Soft Matter Mechanics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-19373-6_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-19373-6_8
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-19372-9
Online ISBN: 978-3-642-19373-6
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)