Abstract
After discharge from the reactor core, the fuel elements are stored in a fuel element storage pool onsite for several years to allow radioactivity decay and after heat decrease. Spent fuel elements are shipped then in special fuel transport casks to either intermediate storage facilities or to the storage pool of a reprocessing plant. After a total cooling period of about 7 years LWR spent fuel elements can be chemically reprocessed. The spent fuel elements are moved from the storage pool into the disassembly cell, where they are cut up by large bundle shears into small pieces. These pieces fall into a dissolver basket filled with boiling nitric acid. The PUREX process is used to chemically separate the dissolved spent fuel into uranium, plutonium and higher actinides with fission products. The final products are uranylnitrate, plutonium nitrate and high level waste. The total capacity of commercial reprocessing facilities is currently about 4,500 t\(_\mathrm{ HM}\)/year in France, UK, Russia, Japan and India. The uranium and plutonium products can be converted into oxides and fabricated into Uranium/Plutonium mixed oxide fuel elements. The latter can be loaded into light water reactor or fast breeder reactor cores. Thorium/uranium fuel can be reprocessed using the THOREX process. The thorium/uranium-233 fuel also can be fabricated into mixed oxide fuel elements and loaded into light water reactors or fast breeder reactors. The remaining wastes are classified into high level waste, medium level waste and low level waste. The high level waste after concentration is vitrified by giving it first into a calcinator and then mixing it with borosilicate glass frits and melting this mixture to a glass. The result is a vitrified high level glass in a steel container. The fuel rod hulls and end pieces of fuel elements as well as insoluble residues are compacted by a 250 MPa press into a cylindrical container. Low level organic waste is sent to a medium temperature pyrolysis system and then to a calcination system. The end product is mixed with pastes, grouts or concrete and filled into low level waste containers. The medium and low level waste packages are sent to medium/low level waste repositories which are already in operation in France, Japan, Spain, Sweden, Finland and the USA since the early 1990s. High level waste packages are foreseen to be disposed into deep geological repositories. For the direct disposal concept of spent fuel elements either the fuel elements or only the fuel rods are loaded in high level waste containers and foreseen to be disposed in a deep geological repository. Up to now no deep geological repository is in operation, but test sites are explored and under investigation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
International Nuclear Fuel Cycle Evaluation (1980) Spent fuel management. Report of INFCE working group 6. International Atomic Energy Agency, Vienna
IAEA Bulletin (1979) The safe transport of radioactive materials. Special Issue. IAEA Bull 21(6):2–75
US Department of Energy (1977) Shipments of nuclear fuel and waste: are they really safe? US Department of Energy, Washington, DOE/EV-0004
Brennelementbehälter (2010) http://de.wikipedia.org/wiki/Brennelementbeh%C3%A4lter
Brennelement-Zwischenlager Ahaus (1979) Deutsche Gesellschaft für Wiederaufarbeitung von Kernbrennstoffen (DWK), Hannover
US Department of Energy (1980) Spent fuel storage factbook: facts booklet. US Department of Energy, Washington, DOE/NE-005
Entsorgung von Kernkraftwerken (2004) Arbeitskreis Abfallmanagement des VGB Power Tech. http://www.vgb.org/abfallmanagement-dfid-1235.html
Kessler G (1983) Nuclear fission reactors. Springer, Wien
Sindelar R (2011) Extended spent fuel storage. Nucl News 54(12):46–48
Broeders CHM (2011) Private communication, Karlsruhe Institute of Technology
Baumgärtner F (1978) Chemie der nuklearen Entsorgung. Karl Thiemig, München
Benedict M et al (1981) Nuclear chemical engineering. McGraw-Hill, New York
Bericht über das in der Bundesrepublik Deutschland geplante Entsorgungszentrum für ausgediente Brennelemente aus Kernkraftwerken (1977) Deutsche Gesellschaft für Wiederaufarbeitung von Kernbrennstoffen (DWK), Hannover
International Nuclear Fuel Cycle Evaluation (1980) Reprocessing, plutonium handling, recycle. Report of INFCE working group 4. International Atomic Energy Agency, Vienna
US Nuclear Regulatory Commission (1976) Final generic environmental statement on the use of recycle plutonium in mixed oxide fuel in light water cooled reactors (GESMO). US Nuclear Regulatory Commission, Washington, NUREG-002
McLeod HM et al (1993) Development of mixed oxide fuel manufacture in the United Kingdom and the influence of fuel characteristics on irradiation performance. Nucl Technol 102:3–17
Leblanc JM, Vanden Bernden E (1978) Chemical aspects of mixed oxide fuel production. Radiochimica Acta 25:149–152
Herbig R et al (1993) Vibrocompated fuel for the liquid metal reactor BOR-60. J Nucl Mater 204:93–101
Krellmann J (1993) Plutonium processing at the Siemens Hanau fuel fabrication plant. Nucl Technol 102:18–28
Nuclear power in Russia (2010) http://www.world-nuclear.org/info/inf45.html
Merz E (1978) Wiederaufarbeitung thoriumhaltiger Kernbrennstoffe im Lichte proliferationssicherer Brennstoffkreisläufe. Naturwissenschaften 65:424–431
Orth DA (1979) Savannah River Plant thorium reprocessing experience. Nucl Technol 43:63–74
Hebel LC et al (1978) Report to the American Physical Society by the study group on nuclear fuel cycles and waste management Part II. Rev Mod Phys 50 (1) (Pines D (ed))
International Nuclear Fuel Cycle Evaluation (1980) Advanced fuel cycle and reactor concepts. Report of INFCE working group 8. International Atomic Energy Agency, Vienna
Feraday MA (1979) Remote fabrication of (U-233/Th)O2 pellet-type fuels for CANDU reactors. Trans Am Nucl Soc 32:233–234
Zimmer E et al (1978) Aqueous chemical processes for the preparation of high temperature reactor fuel kernels. Radiochimica Acta 25:161–169
International Nuclear Fuel Cycle Evaluation (1980) Fast breeder reactors. Report of INFCE working group 5. International Atomic Energy Agency, Vienna
Status of Liquid Metal Cooled Fast Breeder Reactors (1985) Technical report series 246, IAEA
Allardice RH et al (1977) Fast reactor fuel reprocessing in the United Kingdom. In: Nuclear power and its fuel cycle, proceedings of the international conference, Salzburg, vol 3. International Atomic Energy Agency, Vienna, 2–13 May 1977, pp 615–630
Auchapt P et al (1980) The French R & D programme for fast reactor fuel reprocessing. In: Fast reactor fuel reprocessing, proceedings of a symposium, Dounreay, Society of Chemical Industry, London, 15–18 May 1979, pp 51–59
Barret TR (1980) The reconstruction of the fast reactor reprocessing plant. In: Fast reactor fuel reprocessing, proceedings of a symposium, Dounreay, Society of Chemical Industry, London, 15–18 May 1979, pp 17–35
Baumgärtner F, Ochsenfeld W (1976) Development and status of LMFBR fuel reprocessing in the Federal Republic of Germany. Kernforschungszentrum Karlsruhe, KfK-2301
Bishop JF et al (1977) Fast reactor fuel design and development. In: Nuclear power and its fuel cycle, proceedings of the international conference, Salzburg, vol 3. International Atomic Energy Agency, Vienna, 2–13 May 1977, pp 377–391
Sauteron J et al (1977) Technologie du retraitement des combustibles des réacteurs rapides. In: Nuclear power and its fuel cycle, Proceedings of the international conference, Salzburg, vol 3. (IAEA-CN-36/567), International Atomic Energy Agency, Vienna, 2–13 May 1977, pp 633–645
Funke P et al (1980) Weiterentwicklung des oxidischen Brennstoffes zum Schnellbrütereinsatz. Atomkernenergie/Kerntechnik 36:253–258
National Research Council, Nuclear Wastes (1996) Technologies for separations and transmutation. National Academy Press, Washington
H12: Project to establish the scientific and technical basis for HLW disposal in Japan (2000) Report JNC TN 1410, 2000–001. JNC, Tokai-mura
Hill R (2009) Fuel cycle subcommittee, overview and status, fusion-fission hybrid workshop. Gaithersburg, 30 Sept 2009
Radioactive waste management (2010) http://www.world-nuclear.org/info/info04.html
Nuclear Waste Conditioning, Nuclear Energy Division Monograph (2009) Commissariat à l’énergie atomique. Gif-sur-Yvette CEDEX, France
International Nuclear Fuel Cycle Evaluation (1980) Waste management and disposal. Report of INFCE working group 7. International Atomic Energy Agency, Vienna
US Department of Energy (1979) Technology of commercial radioactive waste management. US Department of Energy, Washington, DOE/ET-0028
Bröskamp H et al (2004) Endlagerung radioaktiver Abfälle in Deutschland—Abfallaufkommen und Endlagerverfügbarkeit aus EVU-Sicht. Atomwirtschaft 49:248–256
Closs KD (2001) Internationaler Stand der Entsorgung radioaktiver Abfälle, Radioaktivität und Kernenergie, ISBN 3-923704-26-7
Storck R (1992) Long time safety aspects of ultimate storage of transuranium elements. Institut für Tieflagerung, GSF-Forschungszentrum für Umwelt und Gesundheit, Neuherberg GmbH, Braunschweig
Physics and Safety of transmutation systems (2006) A status report. OECD-NEA
Luehrmann G et al (2000) Spent fuel performance assessment for a hypothetical repository in crystalline formations in Germany, GRS-154
Gompper K (2010) Private communication, Karlsruhe Institute of Technology, Institut für Nukleare Entsorgung
Morris E et al (2002) Impact of actinide removal on waste disposal in a geologic repository. In: Fifth topical meeting DOE spent nuclear fuel and fissile material management, Charleston
Davidson E et al (2006) Benefits of an integrated fuel cycle on repository effective capacity. In: Waste management conference, Tucson
Wigeland R (2006) Criteria derived for geologic disposal concepts. In: OECD/NEA 9th information exchange meeting of actinide and fission product partitioning and transmutation. Nîmes
Pigford TH et al (1983) A study of the isolation system for geological disposal of radioactive waste. National Academy Press, Washington
Pigford TH et al (1991) Effects of actinide burning on risk from high level waste. Trans Am Nucl Soc 63:80–83
Nuclear News (2001) EPA releases “final” radiation protection limits. Nucl News 44(8):52
Müller W et al (2009) Abschätzung der Standzeit von Endlagerbetten in einem zukünftigen HAW-Endlager im Salzgestein unter dem Einfluß der Korrosion. Atomwirtschaft 54:303–306
Geckeis H et al (1998) Formation and stability of colloids under simulated near field conditions. Radiochimica Acta 82:123–128
Sheppard SC et al (1996) Chlorine-36 in nuclear waste disposal. 1. Assessment results for used fuel with comparison to \(^{129}\)I and \(^{14}\)C. Waste manag 6(7):607–614
Beasly TM et al (1992) Chlorine-36 releases from the Savannah river site nuclear fuel reprocessing facilities. Groundwater 30(4):539–548
Impact RED (2007) Impact of partitioning, transmutation and waste reduction technologies on final nuclear waste disposal. Synthesis report, Forschungszentrum Jülich, Germany
Cohen B (1977) High-level radioactive waste from light water reactors. Rev Mod Phys 49:1–20
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Kessler, G. (2012). Technical Aspects of Nuclear Fuel Cycles. In: Sustainable and Safe Nuclear Fission Energy. Power Systems. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-11990-3_7
Download citation
DOI: https://doi.org/10.1007/978-3-642-11990-3_7
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-11989-7
Online ISBN: 978-3-642-11990-3
eBook Packages: EngineeringEngineering (R0)