Collection
Engineering: Applied Mechanics and Materials Engineering (AMME)
- Submission status
- Closed
Applied Mechanics and Materials Engineering (AMME) collection aims to publish high quality papers in mechanics of materials, fracture mechanics, damage mechanics, fatigue of material, numerical modeling in engineering, and materials sciences and engineering.
Editors
-
Magd Abdel Wahab
Magd Abdel Wahab, Professor, Ghent University, Belgium. He is also an Adjunct Full Professor in several universities in Vietnam and China. He completed his Ph.D. in Fracture Mechanics at KU Leuven, Belgium and was awarded the degree of Doctor of Science from the University of Surrey. He has published more than 500 scientific papers in solid mechanics and dynamics of structures and edited more than 25 books and proceedings. His research interests include fracture mechanics, damage mechanics, fatigue of materials, durability, and dynamics and vibration of structures.
Articles (43 in this collection)
-
-
Effects of forming techniques on residual stresses in stiffening ribs of sandwich panels
Authors (first, second and last of 7)
- Raheem Al-Sabur
- Andrzej Kubit
- Ján Slota
- Content type: Research
- Open Access
- Published: 20 January 2024
- Article: 10
-
Bond strength of alkali-activated flyash based masonry system for sustainable construction
Authors
- Pooja Kumble
- Prashant Shreelaxmi
- Nishanth Achar
- Content type: Research
- Open Access
- Published: 23 November 2023
- Article: 360
-
Combined effect of magneto hydrodynamics, couple stress, and viscosity variation on squeeze film characteristics of a cylinder and rough flat plate
Authors (first, second and last of 8)
- R. Suresha
- R. Arunkumar
- M. Ijaz Khan
- Content type: Research
- Open Access
- Published: 20 November 2023
- Article: 350
-
Fracture-based modeling of heat-treated AZ91/AZE911 magnesium alloys for estimating high-cycle fatigue lifetime by Paris crack growth rate and striations spacing
Authors (first, second and last of 4)
- Ahmad Yousefi Parchin Oliya
- Mohammad Sadegh Aghareb Parast
- Mehdi Mokhtarishirazabad
- Content type: Research Article
- Open Access
- Published: 29 July 2023
- Article: 222
-
Experimental and statistical investigation on the performance of asphalt overlays reinforced with geocomposite in controlling the reflective cracks under different loadings and temperatures
Authors
- Saeid Asadi
- Gholamali Shafabakhsh
- Content type: Case Study
- Open Access
- Published: 03 July 2023
- Article: 202
-
Investigation of mechanical properties of granular γ-alumina using experimental nano indentation and nano scratch tests
Authors (first, second and last of 4)
- Mojtaba Jahanshahi
- Roozbeh Mofidian
- Mehdi Miansari
- Content type: Research
- Open Access
- Published: 23 May 2023
- Article: 164
-
An experimental study on the abrasive flow machining of aluminum alloy (AA 2024)
Authors
- Yahya Choopani
- Mohsen Khajehzadeh
- Mohammad Reza Razfar
- Content type: Research Article
- Open Access
- Published: 28 April 2023
- Article: 151
-
On the uncertainty in the segmentation of ultrasound images reconstructed with the total focusing method
Authors
- Simon Schmid
- Haoyu Wei
- Christian U. Grosse
- Content type: Research Article
- Open Access
- Published: 22 March 2023
- Article: 108
-
An investigation on responses of thermoelastic interactions of transversely isotropic thick circular plate due to ring load with memory-dependent derivatives
Authors
- Iqbal Kaur
- Kulvinder Singh
- Content type: Research Article
- Open Access
- Published: 22 March 2023
- Article: 109
-
Thermoelastic analysis of semiconducting solid sphere based on modified Moore-Gibson-Thompson heat conduction with Hall Effect
Authors
- Iqbal Kaur
- Kulvinder Singh
- Content type: Research Article
- Open Access
- Published: 12 December 2022
- Article: 16
-
Rheology of partially solidified hypoeutectic aluminum copper alloys
Authors
- Lakshmi Ravi Narayan
- Rainer J. Hebert
- Content type: Research Article
- Open Access
- Published: 24 May 2022
- Article: 186
-
Analysis of biaxial proportional low-cycle fatigue crack propagation for hull inclined-crack plate based on accumulative plasticity
Authors (first, second and last of 5)
- Junlin Deng
- Wenling Tu
- Shenglin Qiu
- Content type: Research Article
- Open Access
- Published: 04 January 2022
- Article: 40
-
Optimal design of high efficiency double helical gear based on dynamics model
Authors
- Fengxia Lu
- Xuechen Cao
- Weiping Liu
- Content type: Research Article
- Open Access
- Published: 03 July 2021
- Article: 726
-
Enhancement of out-of-plane mechanical properties of carbon fiber reinforced epoxy resin composite by incorporating the multi-walled carbon nanotubes
Authors
- Seyed Ali Mirsalehi
- Amir Ali Youzbashi
- Amjad Sazgar
- Content type: Research Article
- Open Access
- Published: 13 May 2021
- Article: 630
-
Manufacturing process design of high-pressure graphite-blasting for mechanical production of turbostratic graphene
Authors (first, second and last of 4)
- Kamilia Aokal
- Abdul Hai Alami
- Mohammad Ali Abdelkareem
- Content type: Research Article
- Open Access
- Published: 31 March 2021
- Article: 519
-
Two-phase flow of dusty fluid with suspended hybrid nanoparticles over a stretching cylinder with modified Fourier heat flux
Authors (first, second and last of 5)
- R. S. Varun Kumar
- R. J. Punith Gowda
- B. C. Prasannakumara
- Content type: Research Article
- Open Access
- Published: 27 February 2021
- Article: 384
-
High static low dynamic stiffness outriggers effects on vibration control on cantilever Timoshenko Beam under earthquake excitation
Authors (first, second and last of 4)
- Buris Peggy Ndemanou
- A. Chéagé Chamgoué
- Jules Metsebo
- Content type: Research Article
- Open Access
- Published: 15 February 2021
- Article: 332
-
Scour monitoring of a bridge pier through eigenfrequencies analysis
Authors (first, second and last of 4)
- Mohamed Belmokhtar
- Franziska Schmidt
- Christophe Chevalier
- Content type: Research Article
- Open Access
- Published: 10 February 2021
- Article: 303
-
Representative volume element based micromechanical modelling of rod shaped glass filled epoxy composites
Authors
- Aanchna Sharma
- Yashwant Munde
- Vinod Kushvaha
- Content type: Research Article
- Open Access
- Published: 28 January 2021
- Article: 232
-
Shape control of hybrid functionally graded plate through smart application of piezoelectric material using simple plate theory
Authors
- K. M. Bajoria
- S. A. Patare
- Content type: Research Article
- Open Access
- Published: 25 January 2021
- Article: 209
-
Approximate analytical solution of buckling of multi-damaged column-like structures using a continuous diffused crack model by variational iteration method
Authors
- Xingzhuang Zhao
- Content type: Research Article
- Open Access
- Published: 08 January 2021
- Article: 39
-
Vibration analysis of rotor-bearing system using polynomial interpolation for squeeze film damper models
Authors
- Tieshu Fan
- Kamran Behdinan
- Content type: Research Article
- Published: 04 December 2020
- Article: 2143
-
Finite element analysis of elastic–plastic and fracture behavior in functionally graded materials (FGMs)
Authors
- M. M. Shahzamanian
- Amir Partovi
- P. D. Wu
- Content type: Research Article
- Published: 02 December 2020
- Article: 2135
-
Combined effects of space porosity and wall properties on a compressible maxwell fluid with MHD peristalsis
Authors (first, second and last of 4)
- Islam M. Eldesoky
- Mohammed S. Nayel
- Hagar M. Raslan
- Content type: Research Article
- Published: 01 December 2020
- Article: 2118
-
A novel approach for the edge rolling force and dog-bone shape by combination of slip-line and exponent velocity field
Authors (first, second and last of 6)
- Yu-Feng Zhang
- Hong-Shuang Di
- Dian-Hua Zhang
- Content type: Research Article
- Published: 23 November 2020
- Article: 2055
-
Reinforcing effect of polyurethane sizing on properties of acrylonitrile–butadiene–styrene composites involving short carbon fiber
Authors
- Shan Abdulalaziz Ahmed
- Seha Tirkes
- Umit Tayfun
- Content type: Research Article
- Published: 19 November 2020
- Article: 2024
-
Correction to: An accurate solution for stress fields strongly varied across the adhesive thickness in soffit plate-strengthened beams
Authors
- Phe Van Pham
- Content type: Correction
- Published: 09 November 2020
- Article: 1971
-
A study on buckling of simply supported plates with edges partially restrained for in-plane movement
Authors
- Kanta Prajapat
- Samit Ray-Chaudhuri
- Ashwini Kumar
- Content type: Short Communication
- Published: 09 November 2020
- Article: 1972
-
Multi-layer flows of immiscible fractional second grade fluids in a rectangular channel
Authors
- Abdul Rauf
- Aoun Muhammad
- Content type: Research Article
- Published: 21 September 2020
- Article: 1714
-
Preventing of flooding phenomena on vacuum distillation trays column via controlling coking value factor
Authors
- Hossein Peiravan
- Ali Reza Ilkhani
- Mohammad Javad Sarraf
- Content type: Research Article
- Published: 11 September 2020
- Article: 1670
-
Electroosmotic natural convection flow in a vertical microchannel with asymmetric heat fluxes
Authors
- Michael O. Oni
- Basant K. Jha
- Content type: Research Article
- Published: 06 September 2020
- Article: 1638
-
Investigation of shot blasting and thermal stress relieving processes on residual stresses and corrosion behavior of X60 steel gas pipelines
Authors
- Alireza Malekahmadi
- Mohammad Honarpisheh
- Content type: Research Article
- Published: 31 August 2020
- Article: 1593
-
An accurate solution for stress fields strongly varied across the adhesive thickness in soffit plate-strengthened beams
Authors
- Phe Van Pham
- Content type: Research Article
- Published: 27 July 2020
- Article: 1433
-
Experimental and theoretical studies of free vibration of a sandwich functionally graded nanocomposite beam under thermal condition
Authors
- M. H. Yas
- S. Mohammadi
- Content type: Research Article
- Published: 23 June 2020
- Article: 1275
-
Square grid deformation in wedge indentation: a new mathematical approach
Authors
- A. K. Biswas
- Santanu Das
- Sanjoy Das
- Content type: Research Article
- Published: 15 June 2020
- Article: 1216
-
A Mori–Tanaka Based Micromechanical Model for Predicting the Effective Electroelastic Properties of Orthotropic Piezoelectric Composites with Spherical Inclusions
Authors
- Neelam Mishra
- Kaushik Das
- Content type: Research Article
- Published: 13 June 2020
- Article: 1206
-
Pressure fluctuation of steam on the disc in a triple eccentric butterfly valve
Authors (first, second and last of 4)
- Wang Haimin
- Hu Feng
- Chen Si
- Content type: Research Article
- Published: 10 June 2020
- Article: 1193
-
Experimental and numerical investigation on the axial behavior of solid and hollow SIFCON columns
Authors
- Shahad S. Khamees
- Mohammed M. Kadhum
- Nameer A. Alwash
- Content type: Research Article
- Published: 18 May 2020
- Article: 1094
-
Electrospun polyester-urethane scaffold preserves mechanical properties and exhibits strain stiffening during in situ tissue ingrowth and degradation
Authors (first, second and last of 7)
- Hugo Krynauw
- Rodaina Omar
- Thomas Franz
- Content type: Research Article
- Published: 24 April 2020
- Article: 953
-
Effect of elevated temperature and humidity on fibers based on 5-amino-2-(p-aminophenyl) benzimidazole (PBIA)
Authors (first, second and last of 6)
- Amy Engelbrecht-Wiggans
- Thanh Nhi Hoang
- Amanda L. Forster
- Content type: Research Article
- Published: 19 March 2020
- Article: 705
-
Characterization of hyperelastic deformation behavior of rubber-like materials
Authors
- Liman Kaoye M. Bien-aimé
- Bale B. Blaise
- T. Beda
- Content type: Research Article
- Published: 14 March 2020
- Article: 648
-
Gas pressure and density effects on vibration of cylindrical pressure vessels: analytical, numerical and experimental analysis
Authors
- Omid Mir
- Meisam Shakouri
- M. R. Ashory
- Content type: Research Article
- Published: 23 December 2019
- Article: 134