Abstract
The following geo-works are considered:
-
excavation and compaction
-
drainage
-
grouting
-
mixing
-
separation
-
freezing
-
blasting
-
underpinning
-
soil washing and waste solidification/stabilisation
-
field measurements and observational method
-
remote sensing
-
asset management
-
forensic investigation
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Andersland OB, Ladany B (1994) An introduction to frozen ground engineering. Chapman & Hall, New York/London
ASCE Press (1997) Chemical grouting. Adopted from Technical Engineering and Design Guides US Army Corps of Engineers, No. 24. American Society of Civil Engineers
ASTM D1004-13 Standard test method for tear resistance (graves tear) of plastic film and sheeting. American Society for Testing and Materials, Philadelphia, PA
ASTM D3786/D3786M-13 Standard test method for bursting strength of textile fabrics – diaphragm bursting strength tester method. American Society for Testing and Materials, Philadelphia, PA
ASTM D4428/D4428M-07 Standard test methods for crosshole seismic testing. American Society for Testing and Materials, Philadelphia, PA
ASTM D4491-99a(2009) Standard test methods for water permeability of geotextiles by permittivity. American Society for Testing and Materials, Philadelphia, PA
ASTM D4533-11 Standard test method for trapezoid tearing strength of geotextiles. American Society for Testing and Materials, Philadelphia, PA
ASTM D4595-11 Standard test method for tensile properties of geotextiles by the wide-width strip method. American Society for Testing and Materials, Philadelphia, PA
ASTM D4632/D4632M-08(2013) Standard test method for grab breaking load and elongation of geotextiles. American Society for Testing and Materials, Philadelphia, PA
ASTM D4751-12 Standard test method for determining apparent opening size of a geotextile. American Society for Testing and Materials, Philadelphia, PA
ASTM D638-10 Standard test method for tensile properties of plastics. American Society for Testing and Materials, Philadelphia, PA
ASTM D882-12 Standard test method for tensile properties of thin plastic sheeting. American Society for Testing and Materials, Philadelphia, PA
Baker WH (ed) (1982) Grouting in geotechnical engineering. In: Proceedings of the conference on grouting in geotechnical engineering. New Orleans, LA
Booy D, Wade M, White V (2008) Invasive species management for infrastructure managers and the construction industry. Construction Industry Research and Information Association UK report C679
BS 5930:1999+A2:2010 Code of practice for site investigations. British Standards Institution, London
BS 6031:2009 Code of practice for earthworks. British Standards Institution, London
Byle M, Borden R (eds) (1995) Verification of geotechnical grouting. ASCE Gt Spec Publ 57:1–66
Campbell JB (2006) Introduction to remote sensing, 4th edn. Taylor & Francis, London/New York
Cedergren HR (1989) Seepage, drainage and flow nets. Wiley, New York
Day RW (1999) Forensic geotechnical and foundation engineering. McGraw-Hill, New York
Dunnicliff J (1988) Geotechnical instrumentation for monitoring field performance. Wiley, New York
EN 1536:2010 Execution of special geotechnical works – bored piles. European Committee for Standardization, Brussels
EN 1538:2010 Execution of special geotechnical works – diaphragm walls. European Committee for Standardization, Brussels
EN 1997-1:2004 Eurocode 7: geotechnical design – Part 1: General rules. European Committee for Standardization, Brussels
EN 12715:2000 Execution of special geotechnical work – grouting. European Committee for Standardization, Brussels
EN 12716:2000 Execution of special geotechnical work – Jet grouting. European Committee for Standardization, Brussels
EN 12716:2001 Execution of special geotechnical works. Let grouting European Committee for Standardization, Brussels
EN 13252:2000 Geotextiles and geotextile-related products – Characteristics required for use in drainage systems. European Committee for Standardization, Brussels
EN 14199:2005 Execution of special geotechnical works – micropiles. European Committee for Standardization, Brussels
EN 14475:2006(E) Execution of special geotechnical works – reinforced fill. European Committee for Standardization, Brussels
EN 14679:2005(E) Execution of special geotechnical works – deep mixing. European Committee for Standardization, Brussels
EN 14731:2005 Execution of special geotechnical works – ground treatment by deep vibration. European Committee for Standardization, Brussels
EN 15237:2007(E) Execution of special geotechnical works – vertical drainage. European Committee for Standardization, Brussels
EN ISO 10319:2008 – Geosynthetics – wide-width tensile test. European Committee for Standardization, Brussels/International Organization for Standardization, Geneva, Switzerland
EN ISO 11058:1999 – Geotextiles and geotextile-related products – determination of water permeability characteristics normal to the plane, without load. European Committee for Standardization, Brussels/International Organization for Standardization, Geneva, Switzerland
EN ISO 12956:1999 – Geotextiles and geotextile-related products – determination of the characteristic opening size. European Committee for Standardization, Brussels/International Organization for Standardization, Geneva, Switzerland
EN ISO 12958:1999 – Geotextiles and geotextile-related products – determination of water flow capacity in their plane. European Committee for Standardization, Brussels/International Organization for Standardization, Geneva, Switzerland
EuroSoilStab (1996) Design guide for soft soil stabilisation CT97-0351. European project for Development of Design and Construction Methods to Stabilise Soft Organic Soils for the Construction of Rail, Road and other Infrastructure BE 96-3177. European Commission 4th Framework Program
EuroSoilStab (1997) Design guide for soft soil stabilization. CT97–0351, Project No: BE 96–3177. European Industrial & Materials Technologies Programme (Brite – Eu Ram III)
Franklin JA, Broch E, Walton G (1971) Logging the mechanical character of rock. Trans Inst Min Metall 80(A):A1–A9
FTMS 101C, Method 2065 Test method for puncture resistance and elongation (1/8 in. radius probe)
GFR (1992) Geotechnical fabrics report 1993 Specifier’s guide. In: Sharma HD, Lewis SP (1994) Waste containment systems, waste stabilization, and landfills. Wiley
Giroud JP, Bonaparte R (1989) Leakage through liners constructed with geomembranes. Geotext Geomembr 8(1):27–67
Grasso D (1993) Hazardous waste site remediation – source control. Lewis Publishers, Boca Raton
Greenspan HF, O’Kon JA, Beasley KJ, Ward JS (1989) Guidelines for failure investigation. ASCE, New York
Gregory CE (1984) Explosives for North American engineers, 3rd edn. Trans Tech Publications, Clausthal
Harr ME (1990) Groundwater and seepage, 2nd edn. Dover Publications, Inc., New York
Holtz RD, Jamiolkowski MB, Lancellotta R, Pedroni R (1991) Prefabricated vertical drains: design and performance. Construction Industry Research and Information Association UK report, Butterworth-Heinemann
Hooper R, Armitage R, Gallagher A, Osorio T (2009) Whole-life infrastructure asset management: good practice guide for civil infrastructure. Construction Industry Research and Information Association report C677, UK
Horner PC (1981) Earthworks, ICE works construction guides. Thomas Telford, London
Houlsby AC (1990) Construction and design of cement grouting. Wiley, New York
Hsieh H, Raghu D (1990) Site cleanup with soil washing technology. In: U.S. EPA Review, U.S. Environmental Protection Agency, Cincinnati, OH
Hunt R, Dyer RH, Driscoll R (1991) Foundation movement and remedial underpinning in low-rise buildings. Building Research Establishment Report BR 184, UK
ISO 10320:1999 Geotextiles and geotextile-related products – identification on site. European Committee for Standardization, Brussels/International Organization for Standardization, Geneva, Switzerland
ISO 10321:2008 Geosynthetics – tensile test for joints/seams by wide-width strip method. European Committee for Standardization, Brussels/International Organization for Standardization, Geneva, Switzerland
Jamiolkowski M, Lancellotta R, Wolski W (1983) Precompression and speeding up consolidation. In: Proceedings of the 8th European conference on soil mechanics and foundation engineering, Helsinki, vol 3, pp 1201–1226
Karol RH (1990) Chemical grouting, 2nd edn. Marcel Dekker, Inc., New York/Basel
Kovacevic N, Potts DM, Vaughan PR (2000) The effect of the development of undrained pore pressure on the efficiency of compaction grouting. Geotechnique 50(6):683–688
Kramer SL (1996) Geotechnical earthquake engineering. Prentice Hall, Upper Saddle River
Littlejohn GS (1982) Design of cement based grouts. In: Baker WH (ed) Proceedings of the conference on grouting in geotechnical engineering, New Orleans, pp 35–48
Mair RJ (2006) Tunnelling and geotechnics – new horizons. Geotechnique 58(9):695–736
McKibbins L, Elmer R, Roberts K (2009) Tunnels: inspection, assessment and maintenance. Construction Industry Research and Information Association report C671, UK
Monahan EJ (1994) Construction of fills, 2nd edn. Wiley, New York
Nelson-Skornyakov FB (1949) Seepage in homogeneous media. Gosudarstvenoe Izdanie Sovetskaya Nauka, Moscow
Nicholson D, Tse V-M, Penny C, O’Hana S, Dimmock R (1999) The observational method in ground engineering: principles and applications. Construction Industry Research and Information Association report 185, UK
Penman ADM (1960) A study of the response time of various types of piezometers. In: Proceedings of the conference on pore pressure and suction in soils. Butterworth, London, pp 53–58
Perry J, Pedley M, Reid M (2001) Infrastructure embankments – condition appraisal and remedial treatment, 2nd edn. Construction Industry Research and Information Association report C550, UK
Perry J, Pedley M, Brady K (2003) Infrastructure cuttings – condition appraisal and remedial treatment. Construction Industry Research and Information Association report C591, UK
Rowe RK, Quigley RM, Booker JR (1995) Clayey barrier systems for waste disposal facilities. E & FN Spon, New York
Sanger FJ, Sayles FH (1979) Thermal and rheological computations for artificially frozen ground construction. Eng Geol 13:311–337
Schwab GO, Fangmeier DD, Elliot WJ, Frevert RK (1993) Soil and water conservation engineering, 4th edn. Wiley, New York
Shuirman G, Slosson JE (1992) Forensic engineering – environmental case histories for civil engineers and geologists. Academic, New York
Shuster JA (1972) Controlled freezing for temporary ground support, Chap. 49. In: Lane KS, Garfield LA (eds) Proceedings of the first North American rapid excavation and tunnelling conference, Chicago, ASCE-AIME Port City Press, Baltimore, vol 2, pp 863–895
Srbulov M (2010) Ground vibration engineering – simplified analyses with case studies and examples. Springer, London
Widman R (ed) (1996) Commission on rock grouting. International Society for Rock Mechanics. Int J Rock Mech Min Sci Geomech Abstr 33(8):803–847
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Srbulov, M. (2014). Geo-works. In: Practical Guide to Geo-Engineering. Geotechnical, Geological and Earthquake Engineering, vol 29. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-8638-6_6
Download citation
DOI: https://doi.org/10.1007/978-94-017-8638-6_6
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-8637-9
Online ISBN: 978-94-017-8638-6
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)