Abstract
In this chapter, the methods for the preparation of various iptycene-containing polymers and oligomers will be discussed in details. The structural features and the properties of these polymers and oligomers will also be described in the following corresponding sections. When a 3D structural unit, especially, a rigid 3D skeleton was introduced into a polymer, some special physical properties could be shown. As early as 1968, Klanderm and Faber (J Polym Sci Part A1 Polym Chem 6:2955–2965, 1968) attempted to prepare the polymers containing 9,10-bis(hydroxylmethyl)triptycene unit, which was expected to enhance the glass transition temperature (T g). Consequently, they obtained the modified polyesters with 9,10-bis(hydroxylmethyl)triptycene instead of the common glycol components, and found that the target poly(ethylene terephthalate)s expectedly showed the high heat-distortion temperatures and high glass transition temperatures, but the crystallizability was simultaneously declining. Obviously, the rigid bulky triptycene moiety seemed to interfere with the segmental rotation of the polymer chain, leading to an influence on the thermal properties of the polyesters.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Klanderm BH, Faber JWH (1968) Novel bridged anthracene derivatives and polyesters and copolyesters therefrom. J Polym Sci Part A1 Polym Chem 6:2955–2965
Hoffmeister E, Kropp JE, McDowell TL, Michel RH, Rippie WL (1969) Triptycene polymers. J Polym Sci Part A1 Polym Chem 7(1):55–72
Kasashima Y, Kaneda T, Saito G, Akutsu F, Naruchi K, Miura M (1994) Synthesis and properties of aromatic polyamides from 2,7-triptycenediamine. Macromol Chem Phys 195(8):2693–2697
Akutsu F, Inoki M, Kondo M, Inagawa T, Kayaki K, Kasashima Y (1997) Synthesis and properties of novel polyarylates and poly(ether ether ketone)s derived from 2,7-triptycenediol. Polym J 29(12):1023–1028
Tsui NT, Paraskos AJ, Torun L, Swager TM, Thomas EL (2006) Minimization of internal molecular free volume: a mechanism for the simultaneous enhancement of polymer stiffness, strength, and ductility. Macromolecules 39(9):3350–3358
Tsui NT, Torun L, Pate BD, Paraskos AJ, Swager TM, Thomas EL (2007) Molecular barbed wire: threading and interlocking for the mechanical reinforcement of polymers. Adv Funct Mater 17(10):1595–1602
Tsui NT, Yang Y, Mulliken AD, Torun L, Boyce MC, Swager TM, Thomas EL (2008) Enhancement to the rate-dependent mechanical behavior of polycarbonate by incorporation of triptycenes. Polymer 49(21):4703–4712
Liu Y, Turner SR, Wilkes G (2011) Melt-phase synthesis and properties of triptycene-containing copolyesters. Macromolecules 44(11):4049–4056
Zhang Q, Li S, Li W, Zhang S (2007) Synthesis and properties of novel organosoluble polyimides derived from 1,4-bis 4-(3,4-dicarboxylphenoxy) triptycene dianhydride and various aromatic diamines. Polymer 48(21):6246–6253
Hsiao SH, Wang HM, Chen WJ, Lee TM, Leu CM (2011) Synthesis and properties of novel triptycene-based polyimides. J Polym Sci Pol Chem 49(14):3109–3120
Sydlik SA, Chen Z, Swager TM (2011) Triptycene polyimides: soluble polymers with high thermal stability and low refractive indices. Macromolecules 44(4):976–980
Cho YJ, Park HB (2011) High performance polyimide with high internal free volume elements. Macromol Rapid Commun 32(7):579–586
Gong F, Mao H, Zhang Y, Zhang S, Xing W (2011) Synthesis of highly sulfonated poly(arylene ether sulfone)s with sulfonated triptycene pendants for proton exchange membranes. Polymer 52(8):1738–1747
Long TM, Swager TM (2003) Molecular design of free volume as a route to low-κ dielectric materials. J Am Chem Soc 125(46):14113–14119
Swager TM (2008) Iptycenes in the design of high performance polymers. Acc Chem Res 41(9):1181–1189
Ghanem BS, Msayib KJ, McKeown NB, Harris KDM, Pan Z, Budd PM, Butler A, Selbie J, Book D, Walton A (2007) A triptycene-based polymer of intrinsic microposity that displays enhanced surface area and hydrogen adsorption. Chem Commun (Camb) (1):67–69
Ghanem BS, Hashem M, Harris KDM, Msayib KJ, Xu M, Budd PM, Chaukura N, Book D, Tedds S, Walton A, McKeown NB (2010) Triptycene-based polymers of intrinsic microporosity: organic materials that can be tailored for gas adsorption. Macromolecules 43(12):5287–5294
Zhu ZG, Swager TM (2001) Conjugated polymers containing 2,3-dialkoxybenzene and iptycene building blocks. Org Lett 3(22):3471–3474
Zhu ZG, Swager TM (2002) Conjugated polymer liquid crystal solutions: control of conformation and alignment. J Am Chem Soc 124(33):9670–9671
Hoogboom J, Swager TM (2006) Increased alignment of electronic polymers in liquid crystals via hydrogen bonding extension. J Am Chem Soc 128(47):15058–15059
Chen Z, Bouffard J, Kooi SE, Swager TM (2008) Highly emissive iptycene-fluorene conjugated copolymers: synthesis and photophysical properties. Macromolecules 41(18):6672–6676
Yang JS, Swager TM (1998) Porous shape persistent fluorescent polymer films: an approach to TNT sensory materials. J Am Chem Soc 120(21):5321–5322
Yang JS, Swager TM (1998) Fluorescent porous polymer films as TNT chemosensors: electronic and structural effects. J Am Chem Soc 120(46):11864–11873
Williams VE, Swager TM (2000) Iptycene-containing poly(arylene-ethynylene)s. Macromolecules 33(11):4069–4073
Amara JP, Swager TM (2005) Synthesis and properties of poly(phenylene ethynylene)s with pendant hexafluoro-2-propanol groups. Macromolecules 38(22):9091–9094
Yamaguchi S, Swager TM (2001) Oxidative cyclization of bis(biaryl)acetyl-enes: synthesis and photophysics of dibenzo[g, p]chrysene-based fluorescent polymers. J Am Chem Soc 123(48):12087–12088
Zahn S, Swager TM (2002) Three-dimensional electronic delocalization in chiral conjugated polymers. Angew Chem Int Ed 41(22):4225–4230
Zhao XM, Cardolaccia T, Farley RT, Abboud KA, Schanze KS (2005) A platinum acetylide polymer with sterically demanding substituents: effect of aggregation on the triplet excited state. Inorg Chem 44(8):2619–2627
Bailey GC, Swager TM (2006) Masked michael acceptors in poly(phenyleneethynylene)s for facile conjugation. Macromolecules 39(8):2815–2818
Nesterov EE, Zhu ZG, Swager TM (2005) Conjugation enhancement of intramolecular exciton migration in poly(p-phenylene ethynylene)s. J Am Chem Soc 127(28):10083–10088
Ohira A, Swager TM (2007) Ordering of poly(p-phenylene ethynylene)s in liquid crystals. Macromolecules 40(1):19–25
Meador MAB (1988) Processable, high-temperature polymers from 1,4,5,8-tetrahydro-1,4-5,8-diepoxyanthracene and bis-dienes. J Polym Sci Polym Chem 26(11):2907–2916
Meador MAB, Meador MA, Ahn MK, Olshavsky MA (1989) Evidence for thermal dehydration occurring in Diels–Alder addition polymers. Macromolecules 22(11):4385–4387
Zhao DH, Swager TM (2005) Conjugated polymers containing large soluble diethynyl iptycenes. Org Lett 7(20):4357–4360
Perepichka DF, Bendikov M, Meng H, Wudl F (2003) A one-step synthesis of a poly(iptycene) through an unusual Diels–Alder cyclization/dechlorination of tetrachloropentacene. J Am Chem Soc 125(34):10190–10191
Thomas SW, Long TM, Pate BD, Kline SR, Thomas EL, Swager TM (2005) Perpendicular organization of macromolecules: synthesis and alignment studies of a soluble poly(iptycene). J Am Chem Soc 127(51):17976–17977
Chen ZH, Amara JP, Thomas SW, Swager TM (2006) Synthesis of a novel poly(iptycene) ladder polymer. Macromolecules 39(9):3202–3209
Chen Z, Swager TM (2008) Synthesis and characterization of poly(2,6-triptycene). Macromolecules 41(19):6880–6885
Amara JP, Swager TM (2004) Incorporation of internal free volume: synthesis and characterization of iptycene-elaborated poly(butadiene)s. Macromolecules 37(8):3068–3070
Yang JS, Yan JL, Hwang CY, Chiou SY, Liau KL, Tsai HHG, Lee GH, Peng SM (2006) Probing the intrachain and interchain effects on the fluorescence behavior of pentiptycene-derived oligo(p-phenylene-ethynylene)s. J Am Chem Soc 128(43):14109–14119
Maag D, Kottke T, Schulte M, Godt A (2009) Synthesis of monodisperse oligo(1,4-phenyleneethynylene-alt-1,4-triptycyleneethynytene)s. J Org Chem 74(20):7733–7742
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Chen, CF., Ma, YX. (2013). Preparation of Iptycene-Containing Polymers and Oligomers. In: Iptycenes Chemistry. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-32888-6_6
Download citation
DOI: https://doi.org/10.1007/978-3-642-32888-6_6
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-32887-9
Online ISBN: 978-3-642-32888-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)