Zusammenfassung
Für den Aufbau einer Zellproduktion ist das Zelldesign oberstes Kriterium. Dieses bestimmt die Auslegung der Produktionsschritte und des Maschinenparks. Der Fertigungsprozeß für Li-Ionen-zellen wird mit Elektrodenhrstellung, diversen Methoden der Zellkörperassemblage, Pouch- und Metallgehäuse-Technologie, Elektrolybefüllung und Formierung dargestellt. Vor- und Nachteile von prismatischem und zylindrischem Zelldesign, des Zellkörperaufbaus mit Bicells oder beidseitig beschichteten Elektroden, sowie die Abwägung zwischen Pouch- oder starrem Metallgehäuse werden diskutiert.
Dieser Beitrag ist Hans-Walther Praas gewidmet. Er wollte als Autor zum Gelingen dieses Buches beitragen. Leider wurde ihm dies durch seinen frühen und überraschenden Tod während der redaktionellen Arbeiten verwehrt. Wir haben mit ihm einen außergewöhnlichen Kollegen und Diskussionspartner verloren, den wir gerne in Erinnerung behalten. Karl-Heinz Pettinger.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literatur
Spahr M, Goers D, Leone A, Grivei E (2011) Development of carbon conductive additives for advanced lithium ion batteries. J Power Sources 196(7):3404–3413
Sanchez-Gonzalez J, Macias-Garcia A, Alexandre-Franco MF, Gomez-Serrano V (2005) Electrical conductivity of carbon blacks under compression. Carbon 43:741–747
Sides CR, Croce F, Young VY, Martin CR, Scrosati B (2005) A high-rate, nanocomposite LiFePO4/Carbon cathode. Electrochem Solid-State Lett 8(9):A484–A487
Wu M-S, Lee J-T, Chiang P-CJ, Lin J-C (2007) Carbon-nanofiber composite electrodes for thin and flexible lithium-ion batteries. J Mater Sci 42:259–265
Chen J, Wang JZ, Minett AI, Liu Y, Lynam C, Liu H, Wallace GG (2009) Carbon nanotube network modified carbon fibre paper for Li-ion batteries. Energy Environ Sci 2:393–396
Zhamu A, Shi J, Chen G, Fang Q, Jang BZ (2012) Graphene-enhanced anode particulates for lithium ion batteries. US 2012/0064409 A1
Buqa H, Holzapfel M, Krummeich F, Veit C, Novak P (2006) Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteries. J Power Sources 161:617–622
Lee J-H, Paik U, Hackley VA, Choi Y-M (2005) Effect of carboxymethyl cellulose on aqueous processing of natural graphite negative electrodes and their electrochemical performance for lithium batteries. J Electrochem Soc 152(9):A1763–A1769
Sano A, Kurihara M, Ogawa K, Iijima T, Maruyama S (2009) Decreasing the initial irreversible capacity loss of graphite negative electrode by alkali-addition. J Power Sources 192:703–707
Lee JH, Lee S, Paik U, Choi Y-M (2005) Aqueous processing of natural graphite particulates for lithium-ion battery anodes and their electrochemical performance. J Power Sources 147:249–255
Zaidi W, Oumellal Y, Bonnet J-P, Zhang J, Cuevas F, Latroche M, Bobet JL, Aymard L (2011) Carboxymethylcellulose and carboxymethycellulose-formate as binders in MgH2-carbon composites for lithium-ion batteries. J Power sources 196:2854–2857
Ouatani LE, Dedryvère R, Ledeuil J-B, Biensan P, Desbrieres J, Gonbeau D (2009) Surface film formation on carbonaceous electrode: influence of the binder chemistry. J Power Sources 189:72–80
Lee J-H, Kim H-H, Wee SB, Paik U (2009) Effect of additives on the dispersion properties of aqueous based C/LiFePO4 paste and its impact on lithium ion battery high power properties. Hosaka powder technology foundation, KONA powder and particle. Journal 27
Lanciotti C (2009) Lithium battery cell manufacturing process. Joint European commission/EPoSS/ERTRAC workshop 2009, Brussels, Kemet Arcotronics Technologies, Sasso Marconi, Italy
Schelisch J (2011) Forschung für die Produktion von Morgen, Portraits der ausgewählten Projekte im BMBF-Programm Forschung für die Produktion von morgen. Projektträger Karlsruhe (PTKA-PFT), Bundesministerium für Bildung und Forschung
Freedom CAR: Electrical energy storage system abuse test manuel for electric and hybrid vehicle applications; Sandia Report, SAND 2005-3123
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Pettinger, KH. (2013). Fertigungsprozesse von Lithium-Ionen-Zellen. In: Korthauer, R. (eds) Handbuch Lithium-Ionen-Batterien. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-30653-2_17
Download citation
DOI: https://doi.org/10.1007/978-3-642-30653-2_17
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-642-30652-5
Online ISBN: 978-3-642-30653-2
eBook Packages: Computer Science and Engineering (German Language)