Abstract
Diverse optical diagnostic tools were applied for monitoring high temperature heat and mass transfer in a number of laser-based technologies . A set of pyrometers was developed and applied for surface temperature monitoring in pulsed periodic Nd-YAG laser welding and surface treatment, deep penetration welding by \(\hbox{CO}_{2}\) and Nd:YAG lasers, laser cladding (LC) with lateral and coaxial powder injection, and selective laser melting (SLM). Particle-in-flight parameters in LC were measured by CCD camera-based diagnostic system. Infrared camera was applied for process visualization in laser welding, cladding, and SLM. Process monitoring was carried out at different temporal and spatial scales and in different spectral bands. True temperature was restored in pulsed laser surface treatment and in pulsed periodic (PP) LC.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
M.N. Azer, J. Mazumder, in Laser Materials Proceedings, ICALEO’93, Orlando, 1994, ed. by P. Denney, B.L. Mordike, p. 235
M. Ignatiev, I. Smurov, G. Flamant, Appl. Surf. Sci. 505, 96–98 (1996)
M. Ignatiev, I. Smurov, G. Flamant, V. Senchenko, V. Dozhdikov, Appl. Surf. Sci. 109–110, 498–508 (1997)
B. Grünenwald, J. Shen, F. Dausinger, H. Hügel: in Proceedings of the 26th International Symposium on Automotive Technology and Automatisation ISATA’93, Aachen, 1993, p. 278
G. Bi, A. Gasser, K. Wissenbach, A. Drenker, R. Poprawe, Surf. Coat. Technol. 201, 2676–2683 (2006)
Y.P. Hu, C.W. Chen, K. Murherjee, J. Laser Appl. 12, 126–130 (2000)
I. Smurov, V. Veiko (eds.), in Proceedings of SPIE, vol. 4157, 2001, pp. 55–66
M. Doubenskaia, Ph. Bertrand, I. Smurov, Thin Solid Films 453–454C, 477–485 (2003)
L.-R. Benedetti, P. Loubeyre, Int. J. High Pres. Res. 24, 423–445 (2004)
T.J. Quinn, Multi-Wavelength Pyrometry vol. 5, (Academic, London, 1983)
T. Duvaut, D. Georgeault, J.L. Beaudoin, Revue générale de Thermique 35, 185–196 (1996)
D.Ya. Svet, High Temp.-High Pressures 4, 715–722 (1972)
D.Ya. Svet, High Temp.-High Pressures 8, 493–498 (1976)
P.B. Coates, Multi-wavelength pyrometry. Metrologia 17, 103–109 (1981)
E. Hagen, H. Rubens, Ann. Phys. 11, 873 (1903)
M. Ignatiev, I. Smurov, G. Flamant, V. Senchenko, V. Dozhdikov, High Temp. Mater. Processes 1, 109–123 (1997)
Ph. Bertrand, M. Ignatiev, G. Flamant, I. Smurov, Vacuum 56, 71–76 (2000)
M. Ignatiev, V. Senchenko, V. Dozhdikov, I. Smurov, Ph. Bertrand, in Proceedings of International Thermal Spray Conference, ITSC-2002, Essen, 2002, pp. 1001–1006
N. Rykalin, A. Uglov, I. Zuev, A. Kokora, Laser and Electron Beam Material Processing (MIR Publishers, Moscow, 1988)
A.A. Uglov, I.Yu. Smurov, A.M. Lashin, A.G. Guskov, Modelling of Thermal Processes under Pulsed Laser Action on Metals (Nauka Publishers, Moscow, 1991)
I. Smurov, A. Lashin, in Laser Applications in Mechanical Industry, ed. by S. Martellucci, A.N. Chester, A.M. Verga Scheggi. NATO ASI Series, Series E: Applied Science, vol. 238, (1993) pp. 165–206
J.C. Ion, Laser Processing of Engineering Materials: Principles Procedure and Industrial Application (Elsevier Butterworth-Heinemann, Burlington, 2005)
W.M. Steen, Laser Material Processing, 3rd edn. (Springer, London, 2003)
H.S. Carslaw, J.C. Jaeger, Conduction of Heat in Solid (Oxford University Press, New York, 1959)
Ph. Bertrand, I. Smurov, D. Grevey, Appl. Surf. Sci. 168, 182–185 (2000)
I. Smurov, M. Ignatiev, Ph. Bertrand, G. Flamant, L. Covelli, J. Thomas, F. Brandt, CISFFEL-6, Toulon, France, 1998, pp. 655
R.T. Deam, M. Brandt, J. Harris, J. Phis. D. 36, 2435–2445 (2003)
T. Klein, M. Vicanek, J. Kroos, I. Decker, G. Simon, J. Phys.D. 27, 2023–2030 (1994)
N. Postacioglu, Ph. Kapadia, J. Dowden, J. Phys. D 22, 1050–1061 (1989)
F.M. Haran, D.P. Hand, S.M. Ebrahim, C. Peters, J.D.C. Jones, Meas. Sci. Technol. 8, 627–633 (1997)
E. Toyserkani, A. Khajepour, S. Corbin, Laser Cladding (CRS Press, Boca Raton, 2005)
V. Ocelík, de U. Oliveira, de M. Boer, de J.Th.M. Hosson, Surf. Coat. Technol. 201, 5875–5883 (2007)
Y. Liu, J. Mazumder, K. Shibata, Metall. Mater. Trans. B. 25(5), 749–759 (1994)
I. Smurov, Surf. Coat. Technol. 202, 4496–4502 (2008)
R. Banerjee, P.C. Collins, A. Genc, H.L. Fraser, Mater. Sci. Eng. A 358(1–2), 343–349 (2003)
Y.T. Pei, V. Ocelik, J.Th.M. De Hosson, Acta Mater. 50, 2035–2051 (2002)
J. Dutta Majumdar, L. Li, Mater. Lett. 64, 1010–1012 (2010)
J. Dutta Majumdar, I. Manna, A. Kumar, P. Bhargava, A.K. Nath, J. Mater. Process. Technol. 209, 2237–2243 (2009)
J. Dutta Majumdar, B. Ramesh Chandra, A.K. Nath, I. Manna, J . Mater. Process. Technol. 203, 505–512 (2008)
W. Xiaolei, Surf. Coat. Technol. 115, 111–115 (1999)
J. Lin, Opt. Laser Technol. 31, 233–238 (1999)
X. He, J. Mazumder, J. Appl. Phys. 101, 053113.1–053113.9 (2007)
J. Mazumder, J. Choi, K. Nagarathnam, J. Koch, D. Hetzner, J. Metals 49, 55–60 (1997)
B. Dutta, V. Singh, H. Natu, J. Choi, J. Mazumder, Adv. Mat. Proc., vol. 167, 2009, pp. 29–32
The POM Group Inc., Auburn Hills, Michigan, USA, in Internet http://www.pomgroup.com, May 2009
A. Rosochowski, A. Matuszak, J. Mater. Process. Technol. 106, 191–198 (2000)
de U. Oliveira, V. Ocelík, J.Th.M. De Hosson, Surf. Coat. Technol. 197, 127–136 (2005)
J. Koch, J. Mazumder, Apparatus and methods for monitoring and controlling multi-layer laser cladding , U.S. Patent No. 6 122 564 (2000).
J. Mazumder, J. K. Kelly, Closed-loop, rapid manufacturing of three-dimensional components using direct metal depositions, U.S. Patent No. 6 925 346, 2000
G. Bi, A. Gasser, K. Wissenbach, A. Drenker, R. Poprawe, Opt. Lasers Eng. 44, 1348–1359 (2006)
J. Mazumder, D. Dutta, N. Kikuchi, A. Ghosh, Opt. Lasers Eng. 34, 397–414 (2000)
M. Doubenskaya, I. Smurov, Appl. Surf. Sci. 252, 4472–4476 (2006)
Th. Duvaut, Infrared Phys. Technol. 51, 292–299 (2008)
I. Yadroitsev, Ph. Bertrand, B. Laget, I. Smurov, J. Nucl. Mater. 362, 189–196 (2007)
Yu. Chivel, I. Smurov, Proceedings of IV International WLT-Conference on Lasers in Manufacturing, Munich, 2007, pp. 553–556
M. Doubenskaia, M. Pavlov, Yu. Chivel, Key Eng. Mater. 437, 458–461 (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Smurov, I., Doubenskaia, M. (2013). Temperature Monitoring by Optical Methods in Laser Processing. In: Majumdar, J., Manna, I. (eds) Laser-Assisted Fabrication of Materials. Springer Series in Materials Science, vol 161. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-28359-8_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-28359-8_9
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-28358-1
Online ISBN: 978-3-642-28359-8
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)