Abstract
Calculating the forces and the relative velocities at the rotor blades for tip speed ratios other than the design tip speed ratio requires a substantial effort. In the following a method is described which is comparatively simple to understand: the blade element momentum method.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Althaus, D.: Profilpolaren für den Modellflug (Profile characteristics for model flight), Neckar Verlag, Villingen Schwenningen, Germany 1985
Glauert, H.: The Analysis of Experimental Results in the Windmill Brake and Vortex Ring States of an Airscrew, Reports and Memoranda, No. 1023, 1926
Naumann, A.: Luftschrauben im Bremsbereich (Air screws for braking), Yearbook of German aviation research 1940, pp. 1745
Prandtl, L.; Oertel, H. (Hrsg.): Prandtl – A guide through fluid mechanics, F. W. Durand: Aerodynamics, vol. 4, Vieweg, Braunschweig, Germany 1990
Eggleston, D. M.; Stoddard, F. S.: Wind Turbine Engineering Design, Van Nostrand Reinhold, New York, 1987
Fateev, E. M.: Windmotors and Windpowerstations, Moscow 1948
Ostowari, C., Naik, D.: Post Stall Studies of Untwisted Varying Aspect Ratio Blades with NACA 44XX Series Airfoil Sections - Part II, Wind Engineering, Vol 9 No. 3 1985, p. 149ff
Hoerner, S. F.: Fluid Dynamic Drag, self-published, Bricktown, N. J., 1965 und Fluid Dynamic Lift, published, Albuquerque, 1985
Snel, H. et al.: Sectional Prediction of 3D-Effects for Stalled Flow on Rotating Blades and Comparison with Measurements, Proceedings ECWEC 1993, Travemünde
Sörensen, J.N. (Editor): VISCWIND – Viscous Effects on Wind Turbine Blades, Department of Energy Engineering, Technical University of Denmark, 1999
Øye, S.: Dynamic Stall – simulated as time lag of separation, IEA 4th symposium on aerodynamics for wind turbines, Rome 1990
Schepers, J.G., Snel, H.: Dynamic Inflow, Yawed Conditions and Partial Span Pitch Control, ECN-C—95-056, Petten 1995
Ferziger, J.H., Peric, M.: Computational Methods for Fluid Dynamics, Springer Verlag, 1997
Siekmann, H. E., Thamsen, P.U.: Strömungslehre – Grundlagen (Fluid dynamics - Basics), Springer Verlag, 2007
Hesse, J.: Numerische Untersuchung der dreidimensionalen Rotorblattumströmung an Windkraftanlagen (Numerical investigation of the three-dimensional flow around rotor blades of wind turbines), Diploma thesis, Technical University of Berlin, Germany 2004
Himmelskamp, H.: Profile investigation on a rotating airscrew, Doktorarbeit (Ph. D. thesis), Göttingen, 1945
Milborrow, D.J., Ross, J.N.: Airfoil characteristics of rotating blades, IEA, LS-WECS, 12th expert meeting, Kopenhagen, Denmark 1984
Sörensen, J.: Prediction of three-dimensional stall with a wind turbine blade using three level viscous-inviscid-interaction model, Proc. European Windenergy Association Conference and Exhibition, Rom, 1986
Corten, G.P.: Flow Separation on Wind Turbine Blades, PhD thesis, University of Utrecht, Netherlands 2001
Timmer, W. A.,, Schaffarczyk, A. P.: The effect of roughness on the performance of a 30% thick wind turbine airfoil at high Reynolds numbers, Proc. EWEA Conference: The science of making torque from wind, Delft, Netherlands, 2004
Phillips, D., Schaffarczyk, A. P.: Blade Element and Actuator Disk Models for a Shrouded Wind Turbine, Proc. 15th IEA Expert Meeting on Aerodynamics of Wind Turbines, NTUA, Athenes, Greece, 26/27th Nov. 2001
ENERCON: Data sheet of the wind turbine E33, 2006
Krämer, T., Rauch, J.: Dreidimensionale Numerische Simulation der Umströmung eines WKA-Rotors mit besonderem Fokus auf den Nabenbereich (Three- dimensional numerical simulation of the flow around a wind turbine rotor focusing on the near-hub region), Project work, Technical University of Berlin, Germany 2006
Paynter, R., Graham, M.: Wind turbine blade surface pressure measurement in the field, Proceedings BWEA 17, Warwick 1995
Bierbooms, W.A.A.M.: A comparison between unsteady aerodynamic models, Proceedings EWEC 1991, Amsterdam
Spera, D.A.: Wind Turbine Technology, ASME Press, New York 1994
Björck, A.: Dynamic Stall and Three-dimensional Effects, FFA TN 1995–31, Stockholm
Rasmussen, F. et al.: Response of Stall Regulated Wind Turbines – Stall Induced Vibrations, Risø-R-691(EN), Risø 1993
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Gasch, R., Twele, J. (2012). Calculation of performance characteristics and partial load behaviour. In: Gasch, R., Twele, J. (eds) Wind Power Plants. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-22938-1_6
Download citation
DOI: https://doi.org/10.1007/978-3-642-22938-1_6
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-22937-4
Online ISBN: 978-3-642-22938-1
eBook Packages: EngineeringEngineering (R0)