Abstract
The use of simulation systems is of significant importance for companies in high-wage countries as the requirements of product- and process quality are generally higher than in low-wage countries due to conditions of the market. Since the implementation of simulation tools is not value-adding in the first place, the performance of virtual product development chain must therefore be continuously increased in terms of greater planning efficiency. Research in the field of virtual production systems therefore addresses the following issue.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abaqus (2009) Dassault Systèmes Simulia Corp., Providence, RI, USA; Standard user manual, version 6.9, Hibbit, Karlsson and Sorensen
Abdul-Ghafour S, Ghodous P, Shariat B, Perna E (2007) A common design-features ontology for product data se-mantics interoperability. In: Proceedings of the IEEE/WIC/ACM international conference on web intelligence, 2–5 Nov 2007, Silican Vally, USA, pp 443–446, 2–5 Nov 2007
Aggteleky B (1987) Grundlagen – Zielplanung – Vorarbeiten, unternehmerische und systemtechnische Aspekte – Marketing und Fabrikplanung. München
Albersmann F (1999) Simulationsgestützte Prozessoptimierung für die HSC-Fräsbearbeitung. Dissertation Universität Dortmund, Vulkan, Essen
AixViPMaP (2010) The Aachen Virtual Platform for Materials Processing: www.aixvipmap.de. Accessed 20 July 2011
Aleksovski Z, Kate WT, Harmelen FV (2006) Exploiting the structure of background knowledge used in ontology matching. In: Proceedings of the international Semantic web conference, Athen, GA, USA, 5–9 Nov 2006
Allard J, Raffin B (2006) Distributed physical based simulations for large VR applications. In: Proceedings of the IEEE Virtual Reality Conference, Alexandria, USA 25–29 March 2006
Alldieck J (1994) Simulation des dynamischen Schleifprozeßverhaltens, Dissertation RWTH Aachen, Shaker, Aachen
Altan T, Yen Y C, Rech J, Hamdi H (2004) Influence of cutting edge radius of coated tool on chip formation in orthogonal cutting of alloy steel. In: Proceedings of the 7th CIRP Conference on Modeling of Machining, Frankreich May 2004
Altenbach J, Altenbach H (1994) Einführung in die Kontinuumsmechanik. Teubner Studienbücher Mechanik, Stuttgart
Altintas Y (2000) Manufacturing automation: metal cutting mechanics, machine tool vibrations, and CNC Design, 1st edn. Cambridge University Press, Cambridge
Altintas Y, Lee P (1996) A general mechanics and dynamics model for helical end mills. Annals CIRP 45(1):59–64
Altintas Y, Lee P (1998) Mechanics and dynamics of ball end milling. Trans ASME 120:684–692
Altintas Y, Brecher C et al (2005) Virtual machine tool. Ann CIRP 54(2):657–674
Altintas Y, Spence A, Tlusty J (1991) End milling force algorithms for CAD systems. CIRP Ann Manuf Technol 40(1):31–34
Anderl R, Trippener D (2000) STEP: standard for the exchange of product model data eine Einführung in die Ent-wicklung, Implementierung und industrielle Nutzung der Normenrei-he ISO 10303 (STEP). Teubner, Stuttgart
Apel M, Böttger B (2009) Phase-field simulation of the microstructure formation in the weld pool and in the heat affected zone during welding of steel. Presented at the 2nd symposium on phase-field modelling in materials science, Aachen, Sept 2009
Apel M, Benke S, Steinbach I (2009a) Virtual dilatometer curves and effective young’s modulus of a 3D multiphase structure calculated by the Phase-Field Method. Comp Mater Sci 45(3):589
Apel M, Böttger B, Rudnizki P, Schaffnit I (2009) Steinbach: grain growth simulations including particle pinning using the multiphase-field concept. ISIJ 49(7):1024–1029
Armarego EJA, Deshpande NP (1989) Computerized predictive cutting models for forces in end-milling including eccentricity effects. CIRP Ann Manuf Technol 38(1):45–49
Assenmacher I, Kuhlen T (2008) The ViSTA virtual reality toolkit. Software engineering and architectures for real-time interactive systems (SEARIS). In: Proceedings of the IEEE VR conference, Reno, Nevada, USA, pp 23–26, 8–12 March 2008
Aumueller D, Do H, Massmann S, Rahm E (2005) Schema and ontology matching with COMA + + . In: Proceedings of the 2005 ACM SIGMOD international conference on Man-agement of data, Baltimore, USA, pp 906–908, 13–17 June 2005
Aurich J C, Biermann D, Blum H, Brecher C et al (2008) Modelling and simulation of process – machine interaction in grinding. Prod Eng 3(1):111–120
AVS Advanced Visual Systems. http://www.avs.com. Accessed 22 Feb 2011
Bakhvalov N, Panasenko G (1989) Homogenisation: averaging processes in periodic media. Kluwer, Dordrecht
Baranowski T, Brinkmann M (2007) Durchgehende Simulationskette für den Spritzgießprozess. Sonderheft Integrative Produktion 1:28
Baudisch T (2003) Simulationsumgebung zur Auslegung der Bewegungsdynamik des mechatronischen Systems Werkzeugmaschine. Dissertation TU München, Utz, München
Bea FX, Scheurer S, Hesselmann S (2008) Projektmanagement. Lucius and Lucius, Stuttgart
Bédoui F, Diani J, Régnier G, Seiler W (2006) Micromechanical modelling of isotropic elastic behaviour of semicrystalline polymers. Acta Mater 54:1513–1523
Beek MHE, Peters GWM, Meijer HEH (2006) Influence of shear flow on the specific volume and the crystalline morphology of isotactic polypropylene. Macromolecules 39:1805–1814
Beer S (1980) Brain of the firm: the managerial cybernetics of organization. Wiley, New York
Benke S (2008) A multi-phase-field model including inelastic deformation for solid state transformations. Proceedings in Applied Mathematics and Mechanics. PAMM 8(1):10407
Benke S, Laschet G (2008) On the interplay between the solid deformation and fluid flow during solidification of a metallic alloy. Comput Mater Sci 43(1):92
Benke S, Rudnizki J, Suwanpinij P, Prahl U (2008) Modeling hot rolling: a study on the microstructural changes during the austenite to ferrite phase transformation in dual phase steels. Presented at 8th World Congress on Computational Mechanics (WCCM8), Venice, Italy, 30 June–5 July , 2008
Benke S et al (2010) Definition of a standardized data format for the exchange of simulation data. www.aixvipmap.de. Accessed 2010
Bensoussan A, Lions JL, Pappanicolaou G (1978) Asymptotic analysis for periodic structures. North-Holland, New York
Berlich R, Kunze M, Schwarz K (2005) Grid computing in Europe: from research to deployment. In: Buyya R, Coddington P, Wendelborn A (eds.) Australasian workshop on grid computing and e-research, vol 44 of CRPIT. Newcastle Australia ACS, Australia, pp 21–27
Berlin J, Motro A (2006) Database schema matching using machine learning with feature selection. In: Pidduck A, Ozsu M, Mylopoulos J, Woo C (eds) Advanced information systems engineering, vol 2348. Springer, Berlin, pp 452–466
Bleck W, Reisgen U, Mokrov O, Rossiter E, Rieger T (2010) Methodology for thermomechanical simulation and validation of mechanical weld-seam properties. Adv Eng Mater 12(3):147–152
Bleicher K (1999) Unternehmenskultur und strategische Unternehmnsführung. In: Hahn D, Taylor B (eds) Strategische Unternehmungsplanung – strategische Unternehmungsführung. Physica, Heidelberg, pp 223–265
Blumauer A (2006) Semantic Web. Springer, New York
Bobzin K, Bagcivan N, Parkot D, Kashko T (2007) Microstructure dependency of the material properties: simulation approaches and calculation methods. Steel Res 78:804–811
Bobzin K, Bagcivan N, Parkot D, Kashko T, Laschet G, Scheele J (2009) Influence of the definition of the representative volume element on effective thermoelastic properties of thermal barrier coatings with random microstructure. Special Issue on recent advantages in modelling and numerical simulations. J Thermal Spray Technol 18(5–6):988–995
Bohl W, Elmendorf W (2005) Technische Strömungslehre. 13th edn. Vogel, Würzburg
Böttger B, Apel M, Eiken J, Schaffnit P, Schmitz GJ, Steinbach I (2009) Phase-field simulation of equiaxed solidification: a homoenthalpic approach to the micro-macro problem. In: Cockcroft SL (eds) Proceedings from the XII international conference on modelling of casting, welding and advanced solidification processes MCWASP, Vancouver, pp 119–127, 7–14 June 2009
Brandes A (2008) Positionierung technologischer Schnittstellen. Berichte aus dem IFW, vol 6
Brecher C, Witt S (2006) Gekoppelte Simulation von Antriebsregelung und Strukturdynamik von Werkzeugmaschinen. In: Brecher C (eds) Simulationstechnik in der Produktion. Fortschrittsberichte VDI Nr. 658. VDI, Düsseldorf
Brecher C, Herfs W (2007) Potenziale der Software-in-the-Loop-Simulation: Erweiterte Diagnose- und Optimierungsmöglichkeiten durch eine vollständige Simulation von Fertigungssystemen. In: Adam W, Pritschow G, Uhlmann E und Weck M (eds) Zuverlässigkeit und Diagnose in der Produktion. Fortschrittsberichte VDI, Reihe 2. VDI, Düsseldorf
Brecher C, Esser M (2008) The consideration of dynamic cutting forces in the stability simulation of HPC-milling processes. In: Proceedings of the 1st international conference on process machine interactions, Hannover, 3–4 Sept 2008
Brecher C, Lohse W (2011) A CAM-integrated virtual manufacturing system for complex milling processes. In: Proceedings of the 44th CIRP conference on manufacturing systems, Madison, 1–3 June 2011
Brecher C et al (2005) Integrierte Simulation von Maschine, Werkstück und Prozess. In: Brecher C, Klocke F, Schmitt R, Schuh G (eds) Wettbewerbsfaktor Produktionstechnik: Aachener Perspektiven – Aachener Werkzeugmaschinenkolloquium 2005. Shaker, Aachen
Brecher C, Lohse W, Herfs W, Eppler C (2007a) Anwendungsorientierte Mechatroniksimulation mit realen und virtuellen Steuerungen. In: Brecher C, Denkena B (eds) Ramp-Up/2 – Anlaufoptimierung durch Einsatz virtueller Fertigungssysteme. VDI, Frankfurt a. M
Brecher C, Vitr M, Voss M (2007b) Vision of a smart machining system – integrating CAM, CNC and machining simulation. In: Proceedings of the 4th international conference on digital enterprise technology, Bath, UK, 19–21 Sept 2007
Brecher C, Esser M, Witt S (2009a) Interaction of manufacturing process and machine tool. CIRP Ann Manuf Technol 58(2):588–607
Brecher C, Lohse W, Vitr M (2009b) CAx Framework for planning five-axis milling processes. In: Proceedings of the 6th CIRP-sponsored international conference on digital enterprise technology, Hong Kong, 14–16 Dec 2009
Brecher C, Herfs W, Bauer S et al (2010) Ressourceneffiziente Maschinensysteme. In: Eversheim W et al (eds) Ressourceneffiziente Produktionstechnik – Ein Aachener Modell: Festschrift für Univ.-Prof. Dr.-Ing. Dr.-Ing. E.h. Dr. h.c. Fritz Klocke. Apprimus, Aachen
Brinksmeier E, Aurich JC et al (2006) Advances in modeling and simulation of grinding processes. Ann CIRP 55(2):667–696
Budak E, Altintas Y, Armarego EJA (1996) Prediction of milling force coefficients from orthogonal cutting data. Trans ASME 118:216–22
Bullinger H-J, Warnecke H-J, Westkämper E (2003) Neue Organisationsformen im Unternehmen: ein Handbuch für das moderne Management. Springer, Berlin
Bundesbank (2010) http://www.bundesbank.de/statistik/. Accessed Sept 2010
Burckhardt W (2001) Das grosse Handbuch Produktion, moderne industrie. Landsberg, Lech
Calphad (2010) http://www.calphad.org/. Accessed Aug 2010
Cerfontaine P, Beer T, Kuhlen T, Bischof C (2008) Towards a flexible and distributed simulation platform computational science and its applications – ICCSA. Springer lecture notes in computer science LNCS 5072 Part1
Chappell D (2004) Enterprise service bus: theory in practice, 1st edn. O’Reilly Media
Chen X, Rowe WB (1996) Analysis and simulation of the grinding process. Part I: generation of the grinding wheel surface. Int J Mach Tools Man 36:8871–882
Clausen M (2005) Zerspankraftprognose und -simulation für Dreh- und Fräsprozesse. Dissertation Universität Hannover, PZH, Garbsen
Clifton C, Housman E, Rosenthal A (1997) Experience with a Combined approach to attribute-matching across heteroge-neous databases. In: Proceedings of the IFIP working conference on data semantics, Leysin, Schweiz, pp 428–453, 7–10 Oct 1997
Collins DJ, Montgommery CA (1995) Competing on ressources: strategy for the 1990s. Har Bus Rev (July/Aug)
Condor – High Throughput Computing (HTC) (2011). http://www.cs.wisc.edu/condor. Accessed 22 Feb 2011
Conrad S (1997), Föderierte Datenbanksysteme: Konzepte der Datenintegration, 1st edn. Springer, Berlin
Conrad S (2006) Enterprise application integration: Grundlagen, Konzepte, Entwurfsmuster, Praxisbeispiele, 1st edn. Elsevier, München
Corsten H, Corsten H, Gössinger R (2008) Projektmanagement: Einführung; [mit Aufgaben und Lösungen], 2., vollst. überarb. und wesentlich erw. Aufl. Oldenbourg, München
COVISE (2011). http://www.hlrs.de/organization/av/vis/covise. Accessed 22 Feb 2011
Dahmus J, Gutowski T(2004) An environmental analysis of machining. Proceedings of IMECE 2004, ASME International Mechanical Engineering Congress and RD&D Expo, Anaheim, California, USA, 14–19 Nov 2004
DeFanti TA, Foster I, Papka ME, Stevens R, Kuhfuss T (1996) Overview of the I-WAY: Wide-area visual supercomputing. Int J Supercomputer Appl High Perf Comput 10(2/3):123–131
Denkena B, Jivishov V (2005) Größeneinflüsse auf die Spanbildung, Zerspankräfte und Eigenspannungen beim Drehen – Experiment und Simulation. In: Vollertsen F (ed) Strahltechnik, vol 27, Prozessskalierung. BIAS, Bremen
Denkena B et al (2003) Deviation analysis of FEM ased cutting simulation. In: The 6th international ESAFORM conference on metal forming, Salerno, Italy, pp 587–590, Apr 2003
Denkena B, Tracht K, Deichmüller M (2006) Wechselwirkungen zwischen Struktur und Prozess beim Werkzeugschleifen. wt Werkstattstech 96(11–12):814–819
Dhamankar R, Lee Y, Doan A, Halevy A, Domingos P (2004) iMAP: discovering complex semantic matches between data-base schemas. In: Proceedings of the 2004 ACM SIGMOD international conference on management of Data, Paris, Frankreich, 13–18 June 2004
Dietmair A, Verl A (2010a) Energieeffizienter betrieb von Produktionsanlagen. In: Tagungsband Energieeffiziente Produkt- und Prozessinnovationen in der Produktionstechnik, 1. Internationales Kolloquium des Spitzentechnologieclusters eniPROD, Chemnitz, 24–25 June 2010
Dietmair A, Verl A (2010b) Energy consumption assessment and optimisation in the design and use phase of machine tools. In: Tagungsband der 17. CIRP Konferenz für Life Cycle Engineering, Hefei, China, 19–21 May 2010
Dilthey U, Goumeniouk A, Pavlyk V (2003) Beamsim – simulation software for laser and electron beam welding. In: Paton BE, Kovalenko VS, Paton EO (eds) Proceeding of the international confererence on laser technologies in welding and materials processing, Katsiveli, Crimea, Ukraine. E.O. Paton Electric Welding Institute, NASU, Kiev, pp 108–113, 19–23 May 2003
Dilthey U, Pavlyk V, Mokrov O, Dikshev I (2005a) Software package simweld for simulation of gas-metal-arc-welding processes of steels and aluminium alloys. In: Cerjak H., Bhadeshia HKDH, Kozeschnik E (eds) Mathematical modelling of weld phenomena 7. Graz Technical University, Austria, pp 1057–1079
Dilthey U, Mokrov O, Pavlyk V (2005b) Modelling of consumable electrode gas-shielded multi-pass welding of carbon steel with preheating. Paton Weld J 4:2–6
DIN 6580 (1985) Bewegung und Geometrie des Zerspanvorgangs
Düssel T, Zilken H, Frings W, Eickermann T, Gerndt A, Wolter M, Kuhlen T (2007) Distributed collaborative data analysis with heterogeneous visualization systems. In: Favre JM, Santos LP, Reiners D (eds) Eurographics symposium on parallel graphics and visualization. Eurographics Association, Lugano, pp 21–28
Dyckhoff H (2006) Produktionstheorie: Grundzüge industrieller Produktionswirtschaft; mit 20 Tabellen. Springer, Berlin
Ehlen G, Ludwig A, Sahm PR, Bührig-Polaczek A (2003) Split-solid-model to simulate the formation of shrinkage cavities and macrosegregations in steel casting. In: Stefanescu DM (ed) Modeling of casting, welding and advanced solidification processes. TMS, Warrendale, pp 285–294
Ehrig M (2007) Ontology alignment, 1st edn. Springer, New York
Eiken J, Böttger B, Steinbach I (2006) Multiphase-field approach for multicomponent alloys with extrapolation scheme for numerical application. Phys Rev E 73:066122
Engmann D, Maßmann S (2007) Instance matching with COMA + +. In: BTW Workshops-Model Management und Metadaten-Verwaltung, Düsseldorf, pp 28–37, 6th March 2007
Eppinger SD, Whitney DE, Smith RP, Gebala DA (1994) A model-based method for organizing tasks in product development. Res Eng Design Theory Appl Concur Eng, 6(1):1–13
ETH-Zürich (2008) Three years activity on “Through-Process-Modelling of Al-alloys” started in spring 2008 at the institute for virtual production at ETH-Zurich
European Commission (2007) Ausschreibungen der Europäischen Kommission im 7. Rahmenprogramm. www.cordis.lu
Euzenat J, Shvaiko P (2007) Ontology matching, 1st edn. Springer, Berlin
Eversheim W, Schuh G (2005) Integrierte Produkt- und Prozessgestaltung. Springer, Berlin
Factsage (2010) www.factsage.com. Accessed 2010
Fleischer J et al (2004) 2D Tool wear estimation using FEM. In: Proceedings of the 7th CIRP Workshop on Modeling of Machining, Frankreich, Mai 2004
Foster I, Kishimoto H, Savva A et al (2005) The open grid services architecture, Version 1.0. Technical report, Global Grid Forum (GGF)
Fowler M (1998) Analysis patterns: reusable object models. Addison-Wesley, Menlo park (ISBN 0201895420)
Fox M, Long D (2003) PDDL2.1: an extension to PDDL for expressing temporal planning domains. J Artif Intell Res, 20
Franzke M (1998) Zielgrößenadaptierte Netzdiagnose und -generierung zur Anwendung der Finite Element Methode in der Umformtechnik. Umformtechnische Schriften Band 86
Freeman RE (1984) Strategic management: a stakeholder approach, [Nachdr.] Aufl. Pitman, Boston
Fresner J, Bürki T, Sittel H (2009) Ressourceneffizienz in der Produktion, Symposium Publishing
Fulchiron R, Cascone A (2008) Squeeze flow induced crystallization of isotactic polypropylene. In: Proceedings of the 26th annual meeting of the polymer processing society (PPS), Salerno, Italien, 15–19 June 2008
Gagnon M, Michael (2007) Ontology-based integration of data sources. In: Proceedings of the 10th international conference on information fusion, Quebec, Kanada, pp 1–8
García-Solaco M, Saltor F, Castellanos M (1995) A structure based schema integration methodology. In: Proceedings of the 11th international conference on data engineering, Taipei, Taiwan, pp 505–512, 6–10 March 1995
Gennari JH et al (2002) The evolution of Protégé: an environment for knowledge-based systems development. Int J Human Comput Stud 58:89–123
Giunchiglia F, Shvaiko P, Yatskevich M (2006) Discovering missing background knowledge in ontology matching. In: Proceedings of the 17th European conference on artificial intelligence August ECAI, Riva del Garda, Italien, pp 382–386, 29 Sept 2006
Glasmacher L (2011) Integrative CAx process chains for manufacturing and repair of turbomachinery parts. In: ICTM – international conference on turbomachinery manufacturing, Aachen, Deutschland, 23–24 Feb 2011
Glißmann M (2000) Beanspruchungsgerechte Charakterisierung des mechanischen Werkstoffverhaltens thermoplastischer Kunststoffe in der Finite-Elemente-Methode (FEM). RWTH Aachen University, Dissertation. ISBN: 3-86130-481-3
g-lite Lightweight Middleware for Grid Computing. http://glite.cern.ch. Accessed 22 Feb 2011
Globus Toolkit. http://www.globus.org. Accessed 22 Feb 2011
Goldak J, Akhlaghi M (2005) Computational welding mechanics. Springer, New York, p 321
Goldhar JD, Jelinek M (1983) Plan for economies of scope. Harv Bus Rev 61(6):141–148
Gorman IE (1985) Conditions for economies of scope in the presence of fixed costs. Rand J Econ 16(3):431–436
Gorton I, Thurman D, Thomson J (2003) Next generation application integration: challenges and new approaches. In: COMPSAC ’03: proceedings of the 27th annual international conference on computer software and applications, Dallas, USA, pp 576, 3–6 Nov 2003
Gottschalk S, Hoeschen A (2008) Produktionsmanagement im Anlauf. In: Schuh, G, Stölzle, W und Straube, F (eds) Anlaufmanagement in der Automobilindustrie erfolgreich umsetzen. Springer, Berlin, pp 177–185
Gottschalk S, Lin MC, Manocha D (1996) OBBTree: a hierarchical structure for rapid interference detection. In: Proceedings of the 23rd annual conference on Computer graphics and interactive techniques, New Orleans, USA, 4–9 Aug 1996
Gottstein G (ed) (2007) Intergral materials modelling: towards physics based through-process models. Wiley, Weinheim
Götze U, Helmberg C, Rünger G et al (2010a) Integrating energy flows in modelling manufacturing processes and process chains of powertrain components. In: Tagungsband Energieeffiziente Produkt- und Prozessinnovationen in der Produktionstechnik, 1. Internationales Kolloquium des Spitzentechnologieclusters eniPROD, Chemnitz, 24.–25.Juni 2010
Götze U, Koriath HJ, Kolesnikov A et al (2010b) Energetische Bilanzierung und Bewertung von Werkzeugmaschinen. In: Tagungsband Energieeffiziente Produkt- und Prozessinnovationen in der Produktionstechnik, 1. Internationales Kolloquium des Spitzentechnologieclusters eniPROD
Grosch J, Liedtke D, Kallhardt K, Tacke D, Hoffmann R, Luiten CH, Eysell FW (1981) Gasaufkohlen bei Temperaturen oberhalb 950° C in konventionellen Öfen und in Vakuumöfen, HTM Härterei-Techn. Mitt 36(5):262
Großmann K, Jungnickel G (2008) Thermische Modellierung von Prozesseinflüssen an spanenden Werkzeugmaschinen. Buchreihe Lehre Forschung Praxis, TU Dresden
Großmann K, Rudolph H, Brecher C et al (2010) Dämpfungseffekte in Werkzeugmaschinen. ZWF 2010(7–8):676–680
Gruber TR (1993) A translation approach to portable ontology specifications. Knowl Acquis 5(2):199–220
Grundig C-G (2006) Fabrikplanung. Carl Hanser, München
Grundig C-G (2008) Fabrikplanung. Carl Hanser, München
Grunwald A, Kopfmüller J (2006) Nachhaltigkeit. Campus, Frankfurt a. M.
Grunwald A, Coenen R, Nitsch J, Sydow A, Wiedemann P (2001) Forschungswerkstatt Nachhaltigkeit. Edition Sigma, Berlin
Guitierrez I, Altuna MA (2008) Work-hardening of ferrite and microstructure-based modeling of its mechanical behaviour under tension. Acta Mater 56:468
Gumenyuk A (2004) Modellbildung und Prozesssimulation des Laserstrahlschweißens von Leichtbauwerkstoffen. In: Dilthey U (ed) Aachener Berichte Fügetechnik Bd 4/2004, Shaker, D 82 (Diss. RWTH Aachen), Aachen
Gutowski T, Dahmus J, Thiriez A (2006) Electrical energy requirements for manufacturing processes. In: Proceedings of the 13th CIRP international conference on life cycle engineering. Leuven, Belgien, May/June 2006
Haas LM, Hernández MA, Popa L, Roth M, Ho H (2005) Clio grows up: from research prototype to industrial tool. In: Proceedings of the 2005 ACM SIGMOD international conference on management of data, Baltimore, USA, pp 805–810, 13–17 June 2005
Haas R, Löckmann D, Pfau D (2009) Energieeffizienz auch bei Stückzahl 1. Vergleich der Energieumsätze anhand der Bewegungskollektive von Nebenantrieben in Werkzeugmaschinen. wt Werkstattstech 99(3):186–191
Hahn D (2009) Entwicklungstendenzen bei der Ausgestaltung von Planungssystemen. In: Hahn D, Taylor B (eds) Strategische Unternehmungsplanung – Strategische Unternehmungsführung. Springer, Berlin
Halevy A, Rajaraman A, Ordille J (2006) Data integration: the teenage years. In: VLDB ’06: proceedings of the 32nd international conference on very large data bases, Seoul, Korea, pp 9–16, 12–15 Sept 2006
Hamel G (1994) The concept of core competence. In: Hamel G, Heene A (eds) Competence-based competition. Wiley, West Sussex, pp 11–33
Hara T et al (2009) Service CAD system to integrate product and human activity for total value. CIRP J Man Sci Tech
Hauff V (1987) Unsere gemeinsame Zukunft. Eggenkamp, Greven
Hegeman JB (2000) Fundamentals of grinding: surface conditions of ground materials. Dissertation Universität von Groningen
Hemmelmann J (2007) Simulation des lastfreien und belasteten Zahneingriffs zur Analyse der Drehübertragung von Zahnradgetrieben. Dissertation RWTH Aachen
Henning M (2008) The rise and fall of CORBA. Commun ACM 51(8):52–57. doi:10.1145/1378704.1378718
Heok TK, Daman D (2004) A review on level of detail. IEEE Computer Graphics, Imaging and Visualization ’04, 70–75. doi:10.1109/CGIV.2004.1323963
Herden S, Gomez JM, Rautenstrauch C, Zwanziger A (2006) Software-Architekturen für das E-Business: Enterprise-Application-Integration mit verteilten Systemen. Springer, Berlin
Hero M (2010) Hierarchical engineering of industrial materials (hero-m) activity started in 2007 at KTH Stockholm. http://www.hero-m.mse.kth.se. Accessed Nov 2010
Hippenstiel F, Bleck W, Clausen B, Hoffmann F, Kohlmann R (2002) Innovative Einsatzstähle als maßgeschneiderte Werkstofflösung zur Hochtemperaturaufkohlung von Getriebekomponenten HTM Härterei-Techn. Mitt 27(4):290–298
Hirsch J (2006) Through process modelling. Mater Sci Forum 519–521: 15–24
Hoffman JD, Davis GT, Lauritzen JI Jr (1976) The rate of crystallization of linear polymers with chain folding. In: Hannay NB (ed) Treatise on solid state chemistry, vol 3. Plenum, New York, pp 497–614
Hoffmann F (2008) Optimierung der dynamischen Bahngenauigkeit von Werkzeugmaschinen mit der Mehrkörpersimulation. Dissertation RWTH Aachen, Apprimus, Aachen
Hoffmann S (2003) Berechnung von Kristallisationsvorgängen in Kunststoffformteilen. RWTH Aachen, Dissertation, 2003. ISBN 3–89653–999-X
Hoppe H (1999) New quadric metric for simplifying meshes with appearance attributes. IEEE Visualization ’99, 59–66
Hohpe G (2004) Enterprise integration patterns: designing, building, and deploying messaging solutions. Addison-Wesley, Boston
Horrocks I, Patel-Schneider P, Boley H, Tabet, Grosof B, Dean M (2004) SWRL: a semantic web rule language com-bining OWL and RuleML. http://www.w3.org/Submission/SWRL/
Hougardy HP (1999) Zukünftige Stahlentwicklung. Stahl Eisen 119(3):85–90
Housmans JW (2008) Flow induced crystallization of isotactic polypropylenes. Technische Universität Eindhoven, Dissertation, 2008. ISBN 978–90–386–1466–3
Howe AA (1998) Alloy design: from composition to a through process model. Steel World 4(1):46–51
Hurevich V, Gusarov A, Smurov I (2002) Simulation of coating profile under plasma spraying conditions. In: Proceedings of the international thermal spray conference, Essen, pp 318–323, 3–6 March 2002
Immpetus Group Sheffield (2010) A new framework for hybrid through-process modelling, process simulation and optimisation in the metals industry. http://www.immpetus.group.shef.ac.uk/. Accessed Nov 2010
Interdisciplinary Centre for Advanced Materials Simulation (ICAMS) Ruhr University Bochum. http://www.icams.de. Accessed Nov 2010
Jakumeit J, Laqua R, Ivas T, Scheele J, Braun M, Mukhopadhyay A, Pelzer M (2003) Multidisciplinary coupled simulations of investment casting processes using CASTS-FLUENT. Materials Science and Technology, Chicago, Illinois, Modeling, control and optimization in nonferrous and ferrous industry, pp 333–342
Janeschitz-Kriegl H (2010) Crystallization modalities in polymer melt processing. Springer, Wien
Jansen U (2009) Simulation des Schweißens kleiner Bauteile. Diplomarbeit, Lehrstuhl: Nichtlineare Dynamik der Laserfertigungsverfahren, RWTH Aachen
JMatPro (2010) http://www.thermotech.co.uk/jmatpro.html
JasperSoft (2007) An Introduction to the Jaspersoft Business Intelligence Suite, whitepaper
Kalden O, Fritzen P, Kranz S (2007) SimVis A concurrent engineering tool for rapid simulation development. In: Proceedings of 3rd international conference on recent advances in space technologies, Istanbul, Turkey, pp 417–422, 9–11 June 2011
Kampker A (2008) Standortplanung I – Planung des Wertschöpfungsumfangs, Aachen. http://www.wzl.rwth-aachen.de/de/7bfd32120f8ba69bc1256f330029938b/fp_ss09_v2.pdf
Kampker A, Schuh G, Franzkoch B, Burggräf P (2009) Factory planning based on a resource strategy. Asian Int J Sci Technol 2(2):91–98
Kanit T, Forest S, Galliet I, Mounoury V, Jeulin D (2003) Determination of the size of the representative volume element for random composites: statistical and numerical approach. Int J Solid Struct 40:3647–3679
Karastoyanova D, Wetzstein B, van Lessen T, Wutke D, Nitzsche J, Leymann F (2007) Semantic service bus: architecture and implementation of a next generation middle-ware. In: Proceedings of the IEEE 23rd international conference on data engineering workshop, Istanbul, Turkey, pp 347–354, 15–20 Apr 2007
Karhausen K (1992) Integrierte Prozess- und Gefügesimulation bei der Warmumformung. Dissertation, Institut für Bildsame Formgebung der RWTH Aachen
Karhausen K, Kopp R (1992) Model for integrated process and microstructure simulation in hot forming. Steel Res 63:6
Karonis N, Papka M, Binns J et al (2003) High-resolution remote rendering of large datasets in a collaborative environment. Future Generation of Computer Systems (FGCS)
Kern W (1962) Die Messung industrieller Fertigungskapazitäten und ihre Ausnutzung: Grundlagen und Verfahren, Westdt., Köln
Kettner H, Schmidt J, Greim H-R (1984) Leitfaden der systematischen Fabrikplanung. Carl Hanser, München
Klages H (1990) Wertorientierungen im Wandel. Campus, Frankfurt am Main
Klenke K, Kohlman R (2005) Einsatzstähle in ihrer Feinkornbeständigkeit, heute und morgen. HTM Z. Werkst. Wärmebehand. Fertigung 60(5):260
Klocke F, König W (2008) Fertigungsverfahren: Drehen, Fräsen, Bohren, vol 1. Springer, Berlin
Klocke F, Schlosser R, Tönissen S (2010a) Prozesseffizienz durch Parameterwahl – Evaluierung des Fräsprozesses. wt Werkstattstech 10(05):346–349
Klocke F, Lung D, Schlosser R (2010b) Energy and resource consumption of cutting processes – how process parameter variations can optimise the total process efficiency. In: Tagungsband zur 17. CIRP Konferenz für Life Cycle Engineering, 19–21 May 2010, Hefei, China
Knapp M (2002) Mesh Decimation using VTK, Technical Report, Vienna University of Technology
Knight JA (1997) Value-based management: developing a systematic approach to creating shareholder value. McGraw-Hill, New York
Kobayashi R (1993) Modeling and numerical simulations of dendritic crystal growth. Physica D 63(3–4):410–423
Komoto H et al (2007) Integration of a service CAD and a life cycle simulator. CIRP Ann Manuf Technol 57(1):9–12
König W (1982) Spezifische Schnittkraftwerte für die Zerspanung metallischer Werkstoffe. Verlag Stahleisen MBH, Düsseldorf
Koruna S (1999) Kernkompetenzen-Dynamik. Orell Füssli, Zürich
Koshy P, Jain VK, Lal GK (1997) Stochastic simulation approach to modelling diamond wheel topography. Int J Mach Tools and Manufact 37(6):751–761
Kozeschnik E, Svoboda J, Fischer FD, Fratzl P (2004) Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: II: numerical solution and application. Mater Sci Eng A 385(1–2):157
Kratzsch S (2000) Prozess- und Arbeitsorganisation in Fließmontagesystemen. Vulkan, Essen
Krauth J, Noche B (2004) Simulation in Produktionsplanung und -Steuerung, whitepaper. http://www.sim-serv.com/pdf/whitepapers/whitepaper_23.pdf
Lang U (2003) Process Chain Integration for Simulation and Data Processing. Space grid workshop, Frascati (Italy)
LARSTRAN (1994) User’s Manual (Revision F). LASSO Ingenieurgesellschaft, Leinfelden Echterdingen
Laschet G (2004) Homogenization of the fluid flow and heat transfer in transpiration cooled multi-layer plates. J Comput Appl Math 168(1–2):277–288
Laschet G, Apel M (2010) Thermo-elastic homogenization of 3-D steel microstructure simulated by phase-field method. Steel Res Int 81(8):637
Laschet G, Baranowski T, Kashko T, Brinkmann M (2008a) Effective anisotropic properties of semi-crystalline polypropylene via a two-level homogenization scheme, 2nd GAMM Seminar on Multiscale Material Modeling, Stuttgart, 11–12th July 2008
Laschet G, Kashko T, Angel St, Scheele J, Nickel R, Bleck W and Bobzin K. (2008b) Microstructure based model for permeability predictions of open-cell metallic foams via homogenization. Mater Sci Eng A 472:214–226
Laschet G, Quade H, Henke T, Dickert H-H, Bambach M (2010) Comparison of elasto-plastic multi-scale analyses of the U-forming process of a steel line-pipe tube. In: Proceedings of IV European Conference on computational mechanics, Paris, France, May 2010
Lavigne C (2006) Advanced ETL with Pentaho Data, Whitepaper, Breadboard BI
Leblond JB et al (1984) Acta Metall 32:137
Leser U (2007) Informationsintegration: Architekturen und Methoden zur Integration verteilter und heterogener Da-tenquellen, 1st edn. Dpunkt, Heidelberg
Li P, Maijer DM, Lindley TC, Lee PD (2007) A through process model of the impact of in-service loading, residual stress, and microstructure on the final fatigue life of an A356 automotive wheel. Mater Sci Eng A 460–461:20–30
Lichter H, Ludewig J (2007) Software Engineering – Grundlagen, Menschen, Prozesse, Techniken. dpunkt, Heidelberg
Lindemann U, Reichwald R, Zäh MF (2006) Individualisierte Produkte. Springer, Berlin
Lödding H (2008) Verfahren der Fertigungssteuerung. Springer, Berlin
Lohse W (2010) Virtuelle Fertigungssysteme in der CAM-Planung. In: Tagungsunterlagen zum Seminar Potenziale und Trends im Bereich der CAD/CAM/NC-Verfahrenskette, 17–18 Nov, Aachen
Lorensen WE, Cline HE (1987) Marching cubes: a high resolution 3D surface construction algorithm. Comput Graph 21(4):163–169
Lorenz U (2004) Anwendung von Werkstoffmodellen auf die Phasenumwandlung und die Austenitkonditionierung von Stählen. Dissertation, Institut für Eisenhüttenkunde der RWTH Aachen, Aachen
Lotter B (2006) Montage in der industriellen Produktion: ein Handbuch für die Praxis; mit 16 Tabellen. Springer, Berlin
Madhavan J, Bernstein P, Rahm E (2001) Generic schema matching with cupid. In: Proceedings of the 27th international conference on very large databases, Rom, Italien, pp 49–58, Sept 2001
Malik F (2004) Systemisches Management, Evolution, Selbstorganisation Grundprobleme, Funktionsmechanismen und Lösungsansätze für komplexe Systeme, 4., unveränderte Aufl. Haupt, Bern
Martellotti ME (1941) An analysis of the milling process. Trans ASME 63:677–700
Martellotti ME (1945) An analysis of the milling process, part II-down milling. Trans ASME 1945:233–251
Meinecke M (2009) Prozessauslegung zum fünfachsigen zirkularen Schruppfräsen von Titanlegierungen. Dissertation RWTH Aachen University. Apprimus, Aachen
Meinecke M et al. (2008) Model based optimization of trochoidal roughing of titanium. In: Proceedings of the 11th CIRP Conference on Modeling of Machining Operations, Gaithersburg, USA, 16–17 Sept 2008
Menzel W (2000) Partizipative Fabrikplanung: Grundlagen und Anwendung, Als Ms. gedr. Aufl. VDI, Düsseldorf
Merchant M E (1945) Mechanics of the metal cutting process I, Orthogonal cutting and a type 11 chip. J Appl Physics 16(5):267–276
Michaeli W, Bussmann M (2006) Developments in the field of microstructure simulation semi-crystalline thermoplastics. J Polymer Eng 26(2–4):275–305
Michaeli W, Baranowski T (2010a) Skalenübergreifende Simulation der Kristallisation in Spritzgussbauteilen. Der Stahlformbauer 5(25):30–36
Michaeli W, Baranowski T (2010b) Skalenübergreifende Simulation der Kristallisation in Spritzgussbauteilen. Tagungsumdruck 25. Internationales Kunststofftechnisches Kolloquium, Aachen
Michaeli W, Baranowski T (2010c) Simulation of the microstructure formation in injection molded semi-crystalline thermoplastic parts. J Polymer Eng 1(30):29–43
Michaeli W, Baranowski T (2010d) Three-dimensional simulation of crystallization effects in injection molded semi-crystalline thermoplastic parts. Proceedings of the 68th Annual Technical Conference (ANTEC) of the Society of Plastics Engineers, Orlando, 2010
Michaeli W, Baranowski T, Dorscheid W, Henseler J (2009a) Integrative materials modeling: towards improved characterisation of molecular orientation in semi-crystalline thermoplastics. In: Proceedings of the 25th Annual Meeting of the Polymer Processing Society, Goa, India
Michaeli W, Bobzin K, Heesel B, Baranowski T, Kashko T, Parkot D, Bagcivan N (2009b) Skalenübergreifende Simulation teilkristalliner Thermoplaste. Werkstoffe in der Fertigung 5:33–34
Michaeli W, Henseler J, Heesel B (2009c) Structural analysis of semi-crystalline thermoplastic parts considering inner properties. In: Proceedings of the 25th annual meeting of the polymer processing society, Goa, India
Michaeli W, Bobzin K, Arping T, Bagcivan N, Baranowski T, Heesel B, Kashko T (2010a) Integrative materials modeling of semi-crystalline thermoplastic parts in 3D. In: Proceedings of the 26th annual meeting of the polymer processing society (PPS), 4–8 July 2010, Banff, Kanada
Michaeli W, Brinkmann M, Heesel B (2010b) Structural analysis of semi-crystalline thermoplastics with regard to the locally disturbed material behaviour due to varying inner properties. In: Proceedings of the 68th annual meeting of the annual technical conference (ANTEC) of the society of plastics engineers, Orlando, USA
Michel J, Pfeiffer S, Schulz W, Niessen M, Kostrykin V (2004) Approximate model for laser welding. In: Radons G, Neugebauer R (eds) Nonlinear dynamics of production systems. Wiley, New York, pp 427–441
Micress (2010) www.micress.de
Minoufekr M (2010) CAx-Prozessketten zur Fertigung und Reparatur von Turbomaschinenkomponenten. In: Tagungsunterlagen zum Seminar Potenziale und Trends im Bereich der CAD/CAM/NC-Verfahrenskette, 17–18 Nov 2010, Aachen
Motik B, Sattler U (2006) A comparison of reasoning techniques for querying large de-scription logic aboxes. In: Hermann M, Voronkov A (eds) Logic for programming, artificial intelligence, and reasoning, vol 4246. Springer, Berlin, pp 227–241
N.N. (1997) Datenermittlung. Hanser, München
National Research Council (2008) Integrated computational materials engineering: a transformational discipline for improved competitiveness and national security. National Academic Press, Washington. ISBN: 0–309-12000-4
Natis Y (2003) Service-oriented architecture scenario. Gartner Research Note AB-19–6751
Negrut D, Rampalli R, Sajdak T (2004) On the implementation of the alpha-method in MSC.ADAMS. In: MSC.Software Knowlede Base KB12299
Neugebauer R, Westkämper E, Klocke F et al (2008) Abschlussbericht Untersuchung zur Energieeffizienz in der Produktion. Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V., München
Neumann L, Aretz H, Kopp R, Goerdeler M, Crumbach M, Gottstein G (2003) Integrative finite element simulation of the rolling of Al alloys with coupled dislocation density and texture models. Z Metall 94(5):593–598
Nikolussi M (2008) Extreme elastic anisotropy of cementite, Fe3C: first-principles calculations and experimental evidence. Scripta Mater 59:814–817
Nyhuis P, Wiendahl H-P (2002) Logistische Kennlinien. Springer, Berlin
OMG (Object Management Group) (2011), Common Object Request Broker Architecture. http://www.corba.org. Accessed 22 Feb 2011
OpenDX Paths to Visualization. http://www.opendx.org.. Accessed 22 Feb 2011
Oppenheim BW (2004) Lean product development flow. Syst Eng 7(4):352–376
Ozturk E, Budak E (2007) Modeling of 5-axis milling processes. Mach Sci Technol 11(3):287–311
Pacheco JL, Krauss G (1990) Gefüge und Biegewechselfestigkeit einsatzgehärteter Stähle. HTM Härterei-Techn Mitt 45(2):77
Palopoli L, Terracina G, Ursino D (2003) DIKE: a system supporting the semi-automatic construction of cooperative information systems from heterogeneous databases. Soft Practice Exp 33:847–884
Pandat (2010) http://www.computherm.com/pandat.html
Pantani R, Sorrentino A, Speranza V, Titomanlio G (2004) Molecular orientation in injection molding: experiments and analysis. Rheol Acta 43:109–118
Panzar JC, Willig RD (1977) Economies of scale in multi-output production. Q J Econ 91(3):481–493
Panzar JC, Willig RD (1981) Economies of scope. Am Econ Rev 71(2):268–272
Pavlyk V, Dilthey U (2004) Simulation of weld solidification microstructure and its coupling to the macroscopic heat and fluid flow modelling. Modell Simul Mater Sci Eng 12:33–45
Pawellek G (2008) Ganzheitliche Fabrikplanung. Springer, Berlin
Pepels W (2006) Produktmanagement: Produktinnovation, Markenpolitik, Programmplanung, Prozessorganisation. Wissenschaftsverlag, Oldenbourg
Peters N, Hofstetter J S (2008) Konzepte und Erfolgsfaktoren für Anlaufstrategien in Netzwerken der Automobilindustrie. In: Schuh G, Stölzle W, Straube F (eds) Anlaufmanagement in der Automobilindustrie erfolgreich umsetzen. Springer, Berlin, pp 9–31
Pfeifer T, Masing W (2007) Handbuch Qualitätsmanagement, 5. vollst. neu bearb. Aufl. Hanser, München
Piekenbrink R (1956) Kräfte und Eingriffsverhältnisse an Stirn- und Walzenfräsen. Dissertation RWTH Aachen
Pinto FW, Vargas GE, Wegener K (2008) Simulation for optimizing grain pattern on engineered grinding tools. CIRP Ann Manuf Technol 57:353–356
Porter M E (2009) Wettbewerbsstrategie: Methoden zur Analyse von Branchen und Konkurrenten. Campus, Frankfurt am Main
Posielek S (2004) Einsatz kombinatorischer Optimierungsmethoden bei automatischer Optimierung von Umformprozessen. Umformtechnische Schriften, Bd 125
Pustal B, Böttger B, Ludwig A, Sahm PR, Bührig-Polaczek A (2003) Simulation of macroscopic solidification with an incorporated one-dimensional microsegregation model coupled to thermodynamic software. Met Mat Trans B 34B:411–419
Prahalad CK, Hamel G (1990) The core competence of the corporation. Harv Bus Rev (Mai/Juni):79–91
Quade H, Fayek P, Laschet G, Henke T (2010) Multi-scale simulation of the U- and O-forming of a line-pipe tube. In: Presented at the first conference on multiphysics simulation, Bonn, Germany, Int J Multiphysics, 22–23 June 2010
Raabe D, Godora A (2005) Mesoscale simulation of the kinetcs and topology of spherulite growth during crystallization of isotactic polypropylene (iPP) by using a cellular automaton. Modell Simul Mater Sci Eng 13:733–751
Radaj D (1999) Schweißprozesssimulation. Grundlagen und Anwendungen, vol 141 of Fachbuchreihe Schweißtechnik. DVS, Düsseldorf
Rahm E, Bernstein PA (2001) A survey of approaches to automatic schema matching. VLDB J 10(4):334–350
Regenthal G (2009) Ganzheitliche Corporate Identity. Gabler, Wiesbaden
Rehling S (2009) Technologische Erweiterung der Simulation von NC-Fertigungsprozessen. Disseration Leibniz Universität Hannover, PZH, Garbsen
Reinhart G, Egbers J, Schilp J, Rimpau C (2010) Demographiegerechte und doch wirtschaftliche Montageplanung. wt Werkstattstech (1/2):9–14
Reisgen U, Schleser M, Mokrov O, Ahmed E, Schmidt A, Rossiter E (2009) Integrative Berechnung von Verzug und Eigenspannung auf Basis realer Schweißparameter. In: Presented at SYSWELD Forum Weimar, 2009
Reynolds J, Ginoza S (2004) Internet official protocol standards, internet official protocol standard RFC 3700. http://tools.ietf.org/rfc/rfc3700.txt. Accessed 22 Feb 2011
Reynoldson RW (1996) The evolution of heat treatment equipment and processes for metal processing. Mater Forum 20:71–92
Rieger T, Gazdag S, Prahl U, Mokrov O, Rossiter E, Reisgen U (2010) Simulation of welding and distortion in ship building. Adv Eng Mater 12(3):153–157
Rizzi S, Abelló A, Lechtenbörger J, Trujillo J (2006) Research in data warehouse modeling and design: dead or alive? In: Proceedings of the 9th ACM international workshop on Data warehousing and OLAP, Arlington, USA, pp 3–10, 5–11 Nov 2006
Rodriguez R, Gutierrez I (2003) A unified formulation to predict the tensile curves of steels with different microstructures. Mater Sci Forum 426–432:4525
Rosenstiel LV (1993) Der Einfluß des Wertewandels auf die Unternehmenskultur. In: Lattmann C (ed) Die Unternehmenskultur. Physica-Verlag, Heidelberg
Roters F, Eisenlohr P, Bieler TR, Raabe D (2010) Crystal plasticity finite element methods CP-FEM. Wiley, Weinheim. ISBN 978–3527 32447–7
Rudnizki J, Zeislmair B, Prahl U, Bleck W (2010a) Prediction of abnormal grain growth during high temperature treatment. Comput Mater Sci 49(2):209
Rudnizki J, Zeislmair B, Prahl U, Bleck W (2010b) Thermodynamical simulation of carbon profiles and precipitation evolution during high temperature case hardening. Steel Res Int 81(6):472
Sanchez R, Heene A (1996) A systems view of the firm in competence-based competition. In: Sanchez R, Heene A, Thomas H (eds) Dynamics of competence-based competition. Elsevier, Oxford, pp 39–62
Sanchez-Palencia E (1980) Non-homogeneous media and vibration theory. Springer, Berlin
Schady R (2008) Methode und Anwendungen einer wissensorientierten Fabrikmodellierung. Dissertation, Otto-von-Guericke Universität Magdeburg
Schäffer U, Weber J, Willauer B (2001) Zur Optimierung von Intensität und Neuplanungsanteil der operativen Planung. Controlling 13:283–288
Schmigalla H (1995) Fabrikplanung. Carl Hanser, München
Schmitz GJ, Prahl U (2009) Toward a virtual platform for materials processing. JOM 61(5):26
Schmitz GJ, Prahl U (2011) Integrative computational materials engineering-concept and applications of a modular simulation platform. Wiley. ISBN 978–3–527–33081–2 (2011, in preparation)
Schneider MC et al (1995) Formation of macrosegregation by multicomponent thermosolutal convection during the solidification of steel. Met Mat Trans A 26A:2373–2388
Scholz-Reiter B, Krohne F (2006) Prozessänderungen – Engpassorientierte Realisierung von Anlaufzielgrößen. Ind Manage 22(6)
Schopfer G, Yang A, v Wedel L, Marquardt W (2004) CHEOPS: a tool-integration platform for chemical process modelling and simulation. Int J Soft Tools Technol Trans 6(3):186–202
Schroeder W, Kitware Inc (2006) The visualization toolkit: an object-oriented approach to 3D graphics, 4th edn. Kitware, Clif-ton Park
Schroeder W, Martin K, Lorensen B (2006) The visualization toolkit – an object-oriented approach to 3Dgraphics, 4th edn. Kitware, Inc., www.vtk.org
Schroeder WJ, Zarge JA, Lorensen WE (1992) Decimation of triangle meshes. SIGGRAPH 92:65–70. doi:10.1145/133994.134010
Schuh G, Gottschalk S (2008) Production engineering for self-organizing complex systems. Prod Eng – Res Dev 2(4):431–435
Schuh G, Kampker A, Franzkoch B (2005) Anlaufmanagement. wt Werkstattstech 95(5):405–409
Sethi AK, Sethi SP (1990) Flexibility in manufacturing: a survey. Int J Flex Manuf Syst 2:289–328
Shabana AA (2005) Dynamics of multibody systems, 3rd edn. Cambridge University Press, Cambridge
Shvaiko P, Euzenat J (2005) A survey of schema-based matching approaches. In: Spaccapietra S (ed) Journal on data semantics IV, vol 3730. Springer, Berlin, pp 146–171
Sierra N (2008) Int J Mech Sci 50
Simitsis A, Vassiliadis P, Sellis T (2005) Optimizing ETL processes in data warehouses. ICDE 2005. In: Proceedings of the 21st international conference on data engineering, Tokio, Japan, pp 564–575, 5–8 Apr 2005
Sirin E, Parsia B, Grau BC, Kalyanpur A, Katz Y (2007) Pellet: A practical OWL-DL reasoner. Web Sem Sci Ser Agents World Wide Web 5(2):51–53
Spaccapietra S, Parent C (1991) Conflicts and correspondence assertions in interoperable databases. SIGMOD Record 20(4):49–54
Specht D (2007) Strategische Bedeutung der Produktion. Gabler, Wiesbaden
Srinivasan S (1995) RPC: Remote procedure call protocol specification version 2, internet official protocol standard RFC 1831. http://tools.ietf.org/rfc/rfc1831.txt. Accessed 22 Feb 2011
STAR-Cast (2011) Gieß-und Erstarrunsgsimulationssoftware. http://www.starcast.org. Accessed 18 July 2011
Stautner M (2006) Simulation und Optimierung der mehrachsigen Fräsbearbeitung. Dissertation Universität Dortmund, Vulkan, Essen
Stegen A (2007) Ein systemtechnischer Beitrag zur Zerspanungstheorie. Dissertation RWTH Aachen, VDI, Düsseldorf
Steinbach I, Pezzolla F, Nestler B, Seeßelberg M, Prieler R, Schmitz GJ, Rezende JLL (1996) A phase field concept for multiphase systems. Physica D 94:135–147
Stepping (2007) Fabrikplanung im Umfeld von Wertschöpfungsnetzwerken und ganzheitlichen Produktionssystemen. Dissertation, TU Karlsruhe
Strempel H (1963) Ein Beitrag zur Darstellung der Schnitt- und Drangkräfte beim Walzfräsen und Drehen. Dissertation, TU Dresden
Stuckenschmidt H (2009) Ontologien: Konzepte, Technologien und Anwendungen, 1st edn. Springer, Berlin
Studer R, Benjamins VR, Fensel D (1998) Knowledge engineering: principles and methods. Data Knowl Eng 25(1):161–197
Stüve J, Gries T (2009) Advances in the simulation of the overbraiding process using FEM. In: Erath MA (ed) Composites – innovative materials for smarter solutions: SEICO 09; SAMPE Europe 30th international jubilee conference and forum, Paris; Proceedings 2009 – Riehen: SAMPE Europe Conferences, 2009, pp 618–625, 23–25 March 2009
Surmann T (2006) Geometrisch-physikalische Simulation der Prozessdynamik für das fünfachsige Fräsen von Freiformflächen. Dissertation Universität Dortmund, Vulkan, Essen
Tashiro K, Kobayashi M (1996) Molecular theoretical study of the intimate relationships between structure and mechanical properties of polymer crystals. Polymer 37:1775–1786
Taylor FW (1907) On the art of cutting metals. Trans ASME 28:31–279
Teece DJ (1980) Economies of scope and the scope of the enterprise. J Econ Behav Org 1(3):223–247
Terada K, Kikuchi N (2001) A class of general algorithms for multi-scale analyses of heterogeneous media. Comput Methods Appl Mech Eng 190(40–41):5427–5464
Thain D, Tannenbaum T, Livny M (2008) Distributed computing in practice: the condor experience. Concur Comput Pract Exp 17(2–4):323–356
The MPI Forum (1993) MPI: a message-passing interface. In: Proceedings of supercomputing ’94, IEEE Computer Society Press, pp 878–883
The ParaView Guide (2008) ISBN 1-930934-21-4
Thermocalc (2010) www.thermocalc.com
Thiede S, Herrmann C (2010) Simulation-based energy flow evaluation for sustainable manufacturing systems. In: Tagungsband zur 17. CIRP Konferenz für Life Cycle Engineering, Hefei, China, pp 99–104, 19–21 May 2010
Tönshoff HK, Peters J, Inasaki I et al (1992) Modelling and simulation of grinding processes. Ann CIRP 41(2):677–688
Torquato S (2002) Random heterogeneous materials: microstructure and macroscopic properties. Springer, New York
Tsarkov D, Horrocks I (2006) FaCT + + description logic reasoner: system description. In: Automated Reasoning vol 4130, Springer, Berlin, pp 292–297
Ullrich G (1995) Wirtschaftliches Anlernen in der Serienmontage: ein Beitrag zur Lernkurventheorie, Als Ms. gedr. Aufl. Shaker, Aachen
UNICORE Uniform Interface to Computing Resources (2011). http://www.unicore.eu. Accessed 22 Feb 2011
Upton DM (1994) The management of manufacturing flexibility. California Manag Rev 36(2):79
Urban B (2009) Kinematische und mechanische Wirkungen des Kugelkopffräsens. Dissertation Leibniz Universität Hannover, PZH, Garbsen
Valette S, Chassery JM (2004) Approximated centroidal voronoi diagrams for uniform polygonal mesh coarsening. Comput Graph Forum. doi:10.1111/j.1467–8659.2004.00769.x
van Luttervelt CA (2001) Towards predictable performance of metal cutting operations – 50 years of efforts by CIRP STC
van Luttervelt CA, Childs THC, Jawahir IS, Klocke F, Venuvinod PK (1998) Present situation and future trends in modelling of machining operations. Ann CIRP 4(2):587–624
Visser U (2004) Intelligent information integration for the Semantic Web. Springer, Berlin
Vitr M (2008) CAM-NC-Kopplung für einen durchgängigen, bidirektionalen Informationsfluss zwischen Planung und Fertigung. In: Tagungsunterlagen zum Seminar Potenziale und Trends der CAD/CAM/NC-Verfahrenskette, Aachen, 19–20 Nov 2008
Volkwein G (2006) Konzept zur effizienten Bereitstellung von Steuerungsfunktionalität für die NC-Simulation. Dissertation TU München, Utz, München
W3C (2002) Web services. http://www.w3.org/2002/ws. Accessed 22 Feb 2011
Warnken N et al (2003) Multiphase-field model for multicomponent alloys coupled to thermodynamic databases. In: Stefanescu DM (ed) Modeling of casting, welding and advanced solidification processes X. TMS, Warrendale, pp 21–29
Weddige HJ (2002) Stahl im Wettbewerb der Werkstoffe. Dissertation, TU BA Freiberg
Weihan Z, Ming C (2009) Surface reconstruction using dexel data from three sets of orthogonal rays. J Comput Inf Sci Eng 9(1):011008
Weinert K, Blum H, Jansen T, Rademacher A (2007) Simulation based optimization of the NC-shape grinding process with toroid grinding wheels. Prod Eng 1:245–252
Werner G (1971) Kinematik und Mechanik des Schleifprozesses. Dissertation RWTH Aachen
Wernerfeld B (1984) A resouce-based view of a firm. Strat Manage J 5
Westkämper E (2006) Einführung in die Organisation der Produktion. Springer, Berlin
Wiegers KE (2005) Software requirements, Dt. Ausgabe der 2nd edn. Microsoft Press, Unterschleißheim
Wiendahl H-P (2001) New methods for improving flexibity of capacities in productionnetworks. Prod Eng 8(1):93–98
Wiendahl H-P, Nofen D Klußmann J H, Breitenbach F (2005) Planung modularer Fabriken, Carl Hanser Verlag, München
Witt S (2007) Integrierte Simulation von Maschine, Werkstück und spanendem Fertigungsprozess. Dissertation RWTH Aachen, Shaker, Aachen
Wolske M, Kopp R (2000) Microstructure simulation of Ni based alloys. In: Proc IV Conf. Int. de Forjamento, Porto Alegre, pp 42–53
Wolter M, Assenmacher I et al (2008) A time model for time-varying visualization. Comput Graphics Forum 28:1561–1571
Zabel A (2010) Prozesssimulation in der Zerspanung – Modellierung von Dreh und Fräsprozessen. Habilitationsschrift TU Dortmund, Vulkan, Essen
Zacharia T, Vitek JM, Goldak JA, DebRoy TA, Rappaz M, Bhadeshia HKDH (1995) Modeling of fundamental phenomena in welds. Model Simul Mater Sci Eng 3:265–288
Zahn E, Foschiani S, Tilebein M (2000) Wissen und Strategiekompetenz als Basis für die Wettbewerbsfähigkeit von Unternehmen. In: Hammann P, Freiling J (eds) Die Ressourcen- und Kompetenzperspektive des strategischen Managements. Gabler, Wiesbaden
Zhang M-X, Kelly PM (1997) Accurate orientation relationships between ferrite and cementite in pearlite. Scripta Mater 37(12):2009
Zink K J (2009) Personal- und Organisationsentwicklung bei der Internationalisierung von industriellen Dienstleistungen. Physica, Heidelberg
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Schulz, W. et al. (2012). Virtual Production Systems. In: Brecher, C. (eds) Integrative Production Technology for High-Wage Countries. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-21067-9_4
Download citation
DOI: https://doi.org/10.1007/978-3-642-21067-9_4
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-21066-2
Online ISBN: 978-3-642-21067-9
eBook Packages: EngineeringEngineering (R0)