Abstract
The concept of mass customisation connects the opposed production concepts of mass production and customisation to enable an economical production of customer-specific products (Piller, Mass Customization, Ein wettbewerbsstrategisches Konzept im Informationszeitalter, 2006; Pine, Mass customization, the new frontier in business competition, 1993). The individualised production enables companies to do this and contributes to the solution of the dilemma between the economies of scale and economies of scope by delivering suitable approaches and solution concepts.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsNotes
- 1.
To determine the inventory capital for the calculation of Supply Chain capital efficiency, the following rates for cost of capital were applied (from Drukarcyk and Schüler 2007). Automobile industry: 7.9%; Machinery and installations: 10.5% and Chemicals and processing industry: 8.2%.
References
Abe F, Osakada K, Kitamura Y, Matsumoto M, Shiomi M (2000) Manufacturing of titanium parts for medical purposes by selective laser melting. Proc Rapid Prototyping 288–293
Alicke K (2005) Planung und Betrieb von Logistiknetzwerken. Springer, Berlin
Andres MS (2006) Die optimale Varianz. Brand Eins 1:65–69
Anonym (2002) Multi-Slide-Druckgießverfahren nun auch für Kleinteile aus Magnesium nutzbar. Gießerei 11:60–62
Arentzen U (1997) Gabler-Wirtschafts-Lexikon. Gabler, Wiesbaden
Arnold D, Isermann H, Kuhn A, Tempelmeier H, Furmans K (2008) Handbuch Logistik, 3rd edn. Springer, Berlin
Bachmann F, Northrop L (2009) Structured variation management in software product lines. In: Proceedings of the 42nd Hawaii International Conference on System Sciences
Beamon BM (1998) Supply chain design and analysis: models and methods. Int J Prod Econ 55:281–294
Beck K et al (2011) Manifesto for agile software development. http://agilemanifesto.org/. Accessed 14 Mar 2011
Bergquist B (1999) New insights into influencing variables of water atomization of iron. Powder Metall 42(4):331–343
Beyer E (1995) Schweißen mit Laser, Grundlagen. ISBN 3-540-52674-9, Springer, Newyork
Blackenfelt M (2001) Managing complexity by product modularisation. Dissertation, Royal Institute of Technology, Stockholm
Bletzinger KU et al (2010) Optimal shapes of mechanically motivated surfaces. Comput Methods Appl Mech Eng 199:324–333
Boos W (2008) Methodik zur Gestaltung und Bewertung von modularen Werkzeugen. Apprimus Wissenschaftsverlag, Aachen
Boucher M, Barnett R (2008) Tailoring products to customer preferences: configuring profits to order. Aberdeen Group, Boston
Boucher M, Houlihan D (2008) System design: new product development for mechatronics. Aberdeen Group, Boston
Brecher C, Karlberger A, Herfs W (2010a) Wettbewerbsvorteile im Werkzeugmaschinenbau. Effiziente Auftragsabwicklung durch Kombination von Produktlinien-Ansatz und modellbasierter Entwicklung. ZWF 11:991–996
Brecher C et al (2010b) Integration und Durchgaengigkeit von Information im Produktionsmittellebenszyklus. ZWF 4:271–276
Bretzke WR (2010) Logistische Netzwerke. Springer, Berlin
Brillo J, Brook R, Egry I, Quested P (2008) Density and viscosity of liquid ternary Al-Cu-Ag alloys. High Temperatures-High Pressures 37:371–381
Büdenbender W (1991) Ganzheitliche Produktionsplanung und -steuerung. Konzepte für Produktionsunternehmen mit kombinierter kundenanonymer und kundenbezogener Auftragsabwicklung. Springer, Berlin
Bundesverband der Deutschen Gießerei-Industrie Statistik Ne-Metallguss (2007) Düsseldorf
Bundesverband der Deutschen Gießerei-Industrie (2010) Düsseldorf
Caesar C (1991) Kostenorientierte Gestaltungsmethodik für variantenreiche Serienprodukte. Variant mode an effects analysis (VMEA), Dissertation, RWTH Aachen
Carneiroa OS et al (2001) Computer aided rheological design of extrusion dies for profiles. J Mater Process Technol 114:75–86
Carreau PJ (1968) Rheological equations from molecular network theories. Ph.D. thesis, University of Wisconsin
Chandra C, Grabis J (2007) Supply chain configuration. Concepts, solutions, and applications. Springer, Berlin
Chopra S, Meindl P (2010) Supply chain management. Pearson, Boston
Christopher M (2005) Logistics and supply chain management. FT Prentice Hall, Harlow
Clements P (2009) Software product lines. Practices and patterns, 7. Print. Addison-Wesley, Boston
Cobb CW, Douglas PH (1928) A theory of production. Am Econ Rev 18(1):139–165
COMPUPLAST (2010) Mitteilung zur Profilextrusion der COMPUPLAST International Inc., Zlin, Tschechien. http://www.compuplast.com/ProfileDieProductDescription.shtml. Accessed 17 Nov 2010
Cronjäger H (2005) Komplexitaetscontrolling am Beispiel Nutzfahrzeugbau. Dissertation, RWTH Aachen
Curtis B (1992) Maintaining the software process. In: Proceedings of the conference on software maintenance. Orlando, Florida, pp 2–8
Czerner S (2005) Schmelzbaddynamik beim Laserstrahl-Wärmeleitungsschweißen von Eisenwerkstoffen, Diss. Univ. Hannover
Das S (2003) Physical aspects of process control in selective laser sintering of metals. Adv Eng Mater 5:701–711
Debbaut B et al (2006) Numerical simulation of the extrusion process and die design for industrial profile, using the multi-mode pom-pom model. Polymer Processing Society 22nd Annual Meeting, Yamagata, Japan
Domschke W, Scholl A (2005) Grundlagen der Betriebswirtschaftslehre: Eine Einfuehrung aus entscheidungsorientierter Sicht, 3rd edn. Springer, Berlin
Drath R (ed) (2010) Datenaustausch in der Anlagenplanung mit AutomationML. Integration von CAEX, PLCopen XML und COLLADA. Springer, Berlin
Drukarczyk J, Schüler A (2009) Unternehmensbewertung, 6th edn. Vahlen, München
Dudek G (2008) Collaborative planning in supply chains. A negotiation-based approach. Springer, Berlin
Ebli M (2010) Greiner ToolTec nutzte die wirtliche Entwicklung für eine erfoglreiche Neuausrichtung. Extrusion 3:42–43
Eitelwein O, Weber J (2008) Unternehmenserfolg durch Modularisierung von Produkten, Prozessen und Supply Chains. Book on Demand GmbH, Norderstedt
Eplan Engineering Center (2011) http://www.eplan.de/produkte/mechatronik/eplan-engineering-center.html. Accessed 14 Mar 2011
Erixon G (1998) Modular function deployment. A method for product modularisation. Dissertation, KTH Stockholm
Estefan JA (2007) Survey of model-based systems engineering (MBSE) methodologies. http://www.omgsysml.org/MBSE_Methodology_Survey_RevA.pdf. Accessed 14 Mar 2011
Ettinger HJ et al (2004) Parameterization and optimization strategies for the automated design of uPVC profile extrusion dies. Struct Multidiscip Optimization 28:180–194
Eversheim W (1998) Organisation in der Produktionstechnik, vol 2: Konstruktion. Springer, Berlin
Fisher ML, Ittner CD (1999) The impact of product variety on automobile assembly operations: empirical evidence and simulation. Manag Sci 45(6):771–786
Fixon SK (2007) Modularity and commonality research: past developments and future opportunities. Concurrent Eng 2:85–107
Fleisch E (2008) High-resolution-management. Konsequenz der 3. IT-Revolution auf die Unternehmensfuehrung. Schaeffer-Poeschel, Stuttgart
Foerst J (1994) Entscheidungsmodell zur unternehmensspezifischen Auswahl von Funktionen des Qualitaetsmanagements. Shaker, Aachen
Fogarty DW, Blackstone JH Jr, Hoffmann TR (1991) Production and inventory management, 2nd edn. South-Western Publishing, Cincinnati
Förster HU (1988) Integration von flexiblen Fertigungszellen in die PPS. Dissertation, RWTH Aachen. Springer, Berlin
Friedenthal S, Moore A, Steiner R (2009) A practical guide to SysML. The systems modeling language. Elsevier, Morgan Kaufmann OMG, Amsterdam [u. a.]
Gebhardt A (2007) Generative Fertigungsverfahren. Hanser, München
Gershenson JK (2003) Product modularity: definitions and benefits. J Eng Design 3:295–313
Gibson I, Rosen DW, Stucker B (2010) Additive manufacturing technologies. Springer, New York
Giesekus H (1994) Phänomenologische Rheologie – Eine Einführung. Springer, Berlin
Göpfert J (1998) Modulare Produktentwicklung. Zur gemeinsamen Gestaltung von Technik und Organisation. DUV, Wiesbaden
Große-Oetringhaus WF (1974) Fertigungstypologie unter dem Gesichtspunkt der Fertigungsablaufplanung, 1st edn. Duncker, Berlin
Gudehus T (2006) Dynamische disposition. Springer, Berlin
Heesen B, Gruber W (2009) Bilanzanalyse und Kennzahlen: Fallorientierte Bilanzoptimierung, 2nd edn. Gabler, Wiesbaden
Heina J (1999) Variantenmanagement. Kosten-Nutzen-Bewertung zur Optimierung der Variantenvielfalt. Dissertation, TU Cottbus
Herfs WJ (2010) Modellbasierte software in the loop simulation von Werkzeugmaschinen, 1st edn. Apprimus Wissenschaftsverlag, Aachen
Herziger G, Lossen P (1994) Werkstoffbearbeitung mit Laserstrahlung, Grundlagen – Systeme – Verfahren. Hanser, München
Hieber R, Schönsleben PH (2002) Supply chain management. A collaborative performance measurement approach. VDF, Zürich
Higginson JK, Bookbinder JH (2005) Distribution centres in supply chain operations. In: Langevin A, Riopel D (eds) Logistics systems: design and optimization. Springer, Berlin
Hopkinson N (2006) Rapid manufacturing: an industrial revolution for the digital age. Wiley, Chichester
Hoppe N, Conzen F (2002) Europaeische Distributionsnetzwerke: Voraussetzungen, Projektablauf, Fallbeispiele. Gabler, Wiesbaden
Hubka V (1984) Theorie technischer Systeme. Grundlagen einer wissenschaftlichen Konstruktionslehre. Springer, Berlin
Hummler-Schaufler B, Schlumpberger C (2004) Produktentwicklung auf hohem Niveau. Druckguss Praxis 1:39–42
Hungenberg H (2006) Strategisches Management in Unternehmen: Ziele – Prozesse – Verfahren. Gabler, Wiesbaden
INCOSE (2004) What is systems engineering? http://www.incose.org/practice/whatissystemseng.aspx. Accessed 14 Mar 2011
Johnson AA, Tezduyar TE (1994) Mesh update strategies in parallel finite element computations of flow problems with moving boundaries and interfaces. Comput Methods Appl Mech Eng 119:73–94
Junge M (2004) Controlling modularer Produktfamilien in der Automobilindustrie. Entwicklung und Anwendung der Modularisierungs-Balanced-Scorecard. Dissertation, Univ. Mainz
Kaiser A (1995) Integriertes Variantenmanagement mit Hilfe der Prozesskostenrechnung. Dissertation, Univ. St. Gallen
Kang KC (1990) Feature-oriented domain analysis (FODA). Feasibility study; technical report CMU/SEI-90-TR-21-ESD-90-TR-222. Software Engineering Inst. Carnegie Mellon University, Pittsburgh
Kathuria YP (2000) Laser assisted metal rapid prototyping in micro-domain. In: 8th international conference on rapid prototyping, Tokyo, pp 160–165
Kaul S (2004) Rechnergestütze Optimierungsstrategien für Profilextrusionswerkzeuge. Dissertation, RWTH Achen
Keene BJ (1993) Review of data for the surface tension of pure metals. Int Mater Rev 38(4):157–192
Keene BJ, Mills KC, Brooks RF (1985) Surface properties of liquid metals and their effects on weldability. Mater Sci Technol 1:568–569
Kettner H et al (1984) Leitfaden der systematischen Fabrikplanung. Hanser, München
Kilger C, Reuter B, Stadtler H (2008) Collaborative planning. In: Stadtler H, Kilger C (eds) Supply chain management and advanced planning. Concepts, models, software, and case studies. Springer, Berlin, pp 263–284
Kinkel S (2005) Anforderungen an die Fertigungstechnik von morgen. Mitteilung aus der Produktionsinnovationserhebung. Fraunhofer ISI, Karlsruhe, p 12
Kobyrn PA, Semiatin SL (2001) Mechanical properties of laser-deposited Ti-6Al-4V solid freeform fabrication symposium. Austin, USA
Kohlhase N (1996) Strukturieren und Beurteilen von Baukastensystemen, Strategien, Methoden, Instrumente. Dissertation, Univ. Darmstadt
Kohlhase N (1997) Strukturieren und beurteilen von Baukastensystemen. Strategien, Methoden, Instrumente. VDI, Duesseldorf
Koller R (1998) Konstruktionslehre fuer den Maschinenbau. Grundlagen zur Neu- und Weiterentwicklung technischer Produkte mit Beispielen, 4th edn. Springer, Berlin
Koppenhagen F (2004) Systematische Ableitung modularer Produktarchitekturen. Dissertation, TU Hamburg-Harburg
Kruth JP et al (2004) Selective laser melting of iron-based powder. J Mater Process Technol 149(1–3):616
Kruth JP et al (2005) Statistical analysis of experimental parameters in selective laser sintering. Adv Eng Mater 7(8):750–755
Kruth JP, Levy G, Klocke F, Childs THC (2007) Consolidation phenomena in laser and powder bed based layered manufacturing. Ann CIRP 56:730–759
Le C, Bruns T, Tortorelli D (2011) A gradient-based, parameter-free approach to shape otimization. Comput Methods Appl Mech Eng 200. Accepted manuscript (in press)
Ley W (1985) Entwicklung von Entscheidungshilfen zur Integration der Fertigungshilfsmitteldisposition in EDV-gestuetzte Produktionsplanungs- und -steuerungssysteme. Dissertation, RWTH Aachen
Lindemann U (2009) Structural Complexity Management. An Approach for the Field of Product Design. Springer, Heidelberg
Lindemann U, Reichwald R, Zäh M (2006) Individualisierte Produkte. Komplexitaet beherrschen in Entwicklung und Produktion, 1st edn. Springer, Berlin
Lindstädt H, Hauser R (2004) Strategische Wirkungsbereiche des Unternehmens. Spielraeume und Integrationsgrenzen erkennen und gestalten. Gabler, Wiesbaden
Löschmann F (2009) Innovative Antriebe und Perspektiven bei Volkswagen Sachsen. Internationaler AMI Kongress, Leipzig
Lotfi A (2005) Optimal shape design for metal forming problems by the finite element method. Proc Appl Math Mech 5:429–430
Lucas K (2008) Thermodynamik. Die Grundgesetze der Energie- und Stoffumwandlungen. Springer, Berlin
MacDuffie JP, Sethuraman K, Fisher ML (1996) Product variety and manufacturing performance: evidence from the international automotive assembly plant study. Manag Sci 42(3):350–369
MAGMA GmbH (2003) Firmenprofil MAGMA Neuigkeiten in der Druckgußsimulation. Druckgusspraxis
Malik F (2000) Systemisches Management, Evolution, Selbstorganisation: Grundprobleme, Funktionsmechanismen und Loesungsansaetze fuer komplexe Systeme, 2nd edn. Haupt, Bern
Marti M (2007) Complexity management. Optimizing product architecture of industrial products. Dissertation, Univ. St. Gallen
Martin MV (1999) Design for variety. A methodology for developing product platform architectures. Dissertation, Stanford Univ.
Martin MV, Ishii K (1997) Design for variety, development of complexity indices and design charts. ASME Design Engineering Technical Conferences, Sacramento
Mayer S, Thiry E, Frank C, Kara G, Menke A (2009) Excellence in logistics. Studie AT Kearney, Chicago
Medion AG (2009) Geschaeftsbericht 2009. Medion, Essen
Meier J (2007) Produktarchitekturtypen globalisierter Unternehmen. Dissertation, RWTH Aachen
Meiners W (1999) Direktes Selektives Lasersintern einkomponentiger metallischer Werkstoffe. Dissertation, RWTH Aachen
Meiners W (2007) Personal communication, Fraunhofer-ILT
Mellor SJ, Balcer MJ (2002) Executable UML. A foundation for model-driven architecture. Addison-Wesley, Boston
Michaeli W (2009) Extrusionswerkzeuge für Kunststoffe und Kautschuk. Hanser, München
Michaeli W et al (2001) Entwicklung vorausberechnen – Prozesssimulation in der Praxis – eine Standortbestimmung. Kunststoffe 7, 91:32–39
Michaeli W et al (2009) Towards shape optimization of extrusion dies using finite elements. J Plast Technol 5:411–427
Mikkola JH, Gasmann O (2001) Managing modularity of produkt architectures: toward an integral theory. IEEE Trans Eng Manag 22:204–218
Müller M (2007) Automotive SPICE in der Praxis. Interpretationshilfe fuer Anwender und Assessoren. 1st edn. dpunkt-Verl., Heidelberg
NN (2011) Variant Management with pure variants. Technical White Paper. http://www.puresystems.com/fileadmin/downloads/pv-whitepaper-en-04.pdf. Accessed 14 Mar 2011
NN (2004) VDI-Richtlinie 2206 – Entwicklungsmethodik fuer mechatronische Systeme. VDI Fachbereich Produktentwicklung und Mechatronik. Beuth, Berlin
Neuhausen J (2001) Methodik zur Gestaltung modularer Produktionssysteme fuer Unternehmen der Serienproduktion. Dissertation, RWTH Aachen
Nicolai M, Behr M (2007) Portable optimization framework for serial and parallel machines. Second European Conference on Computational Optimization
Nische mit hohem Trendfaktor (2005) In: Werkzeug and Formenbau, März, pp 36–38
Nóbrega JM et al (2003) Flow balancing in extrusion dies for thermoplastic profiles part I--II. Int Polym Process 3:298–312
Nyhuis P, Nickel R, Tullius K et al (2008) Globales Varianten-Produktionssystem. Globalisierung mit System, 1st edn. PZH, Garbsen
Over C (2003) Generative Fertigung von Bauteilen aus Werkzeugstahl X38CrMoV5-1 und Titan TiAL6V4 mit “Selective Laser Melting”. Dissertation, RWTH Aachen
Pahl G, Beitz W, Feldhusen J, Grote K (2005) Konstruktionslehre. Grundlagen erfolgreicher Produktentwicklung, 6th edn. Springer, Berlin
Pahl G et al (2007) Pahl/Beitz Konstruktionslehre: Grundlagen erfolgreicher Produktentwicklung. 7th edn. Springer, Heidelberg
Palupski R (2002) Management von Beschaffung, Produktion und Absatz. Leitfaden mit Praxisbeispielen. Gabler, Wiesbaden
Paredis C et al (2010) An overview of the sysML-modelica transformation specification. INCOSE Intl. Symposium, Chicago
Peak RS et al (2007) Simulation-based design using sysML – part 2: celebrating diversity by example. In: INCOSE Intl. Symposium, Sandiego
Pedrotti F, Pedrotti L, Bausch W, Schmidt H (2002) Optik für Ingenieure. Springer, Heidelberg
Petersheim J (1997a) Selektives Laserschweißen – Ein neuartiges Verfahren zur schnellen Fertigung mechanischer Bauteile. Elektrowärme Int 55(B3):B80--B85
Petersheim J (1997b) Technologien zur direkten Herstellung funktioneller metallischer Prototypen. VDI Fachtagung Rapid Prototyping – Neue Wege zur schnellen Fertigung von Modellen und Prototypen
Pfohl H (2010) Logistiksysteme. Springer, Berlin
Pickhardt J (1999) Entwicklung eines morphologischen Merkmalschemas zur Gestaltung der EDV-Unterstuetzung des Produktdatenmanagements im Rahmen der technischen Auftragsabwicklung, 1st edn. Shaker, Aachen
Piegel L, Tiller W (1997) The NURBS book. Springer, New York
Piller FT (2006) Mass Customization, Ein wettbewerbsstrategisches Konzept im Informationszeitalter. 2nd edn. Gabler DUV, Wiesbaden
Pine JB (1993) Mass customization, the new frontier in business competition. Harvard Business School Press, Boston
Porter ME (1998) Competitive strategy: techniques for analyzing industries and competitors. Free Press, New York
Powell MJD (2009) The BOBYQA algoritm for bound constrained optimization withaout derivates. Department of Applied Mathematics and Theoretical Physics, Cambrigde, England: s.n
Queudeville Y, Ivanov T, Nußbaum C, Vroomen U, Bürig-Polaczek A (2009) Decision and design methodologies for lay-out of modular dies for high-pressure-die-cast-processes. Mater Sci Forum 618–619:345–348
Rapp T (1999) Produktstrukturierung. Komplexitaetsmanagement durch modulare Produktstrukturen und -plattformen. Dissertation, Univ. St. Gallen
Rathnow PJ (1993) Integriertes Variantenmanagement. Bestimmung, Realisierung und Sicherung der optimalen Variantenvielfalt, 1st edn. Vandenhoek and Ruprecht, Göttingen
Reichwald R, Piller F (2006) Interaktive Wertschöpfung, 1st edn. Gabler, Wiesbaden
Rombouts M, Froyen L (2005) Roughness after laser melting of iron based powders, virtual modelling and rapid manufacturing – Bartolo, Taylor and Francis Group, London. ISBN 0415390621, pp 329–335
Rombouts M, Kruth J-P, Froyen L, Mercelis P (2006) Fundamentals of selective laser melting of alloyed steel powders. CIRP Ann 55(1):192–197
Roth K (2000) Konstruieren mit Konstruktionskatalogen. Springer, Berlin
Rumpelt T (2009) Lean besser durch die Krise? Automobil-Produktion 12:20–21
Sahm PR, Egry I, Volkmann T (1999) Schmelze, Erstarrung, Grenzflächen, eine Einführung in die Physik und Technologie flüssiger und fester Metalle. Vieweg, Wiesbaden
Sames G, Büdenbender W (1990) Überblick erhalten. Das morphologische Merkmalschema als praktikables Hilfsmittel fuer die technische Auftragsabwicklung. Maschinenmarkt 96(32):54–59
Sauerland S (1993) Messung der Oberflächenspannung an levitierten flüssigen Metalltropfen. Dissertation, RWTH-Aachen
Schenk M, Wirth S (2004) Fabrikplanung und Fabrikbetrieb: Methoden fuer die wandlungsfaehige und vernetzte Fabrik. Springer, Berlin
Schiaffino S, Sonin AA (1997) Formation an stability of liquid and molten beads on a solid surface. J Fluid Mech 343:95–110
Schiegg P (2005) Typologie und Erklaerungsansaetze fuer Strukturen der Planung und Steuerung in Produktionsnetzwerken. Dissertation, RWTH Aachen
Schirmer A (1980) Dynamische Produktionsplanung bei Serienfertigung. Betriebswirtschaftlich-technologische Beitraege zur Theorie und Praxis des Industriebetriebs, vol 6. Gabler, Wiesbaden
Schleifenbaum H, Meiners W, Wissenbach K (2008) Towards rapid manufacturing for series production: an ongoing process report on increasing the build rate of selective laser melting (SLM). International conference on rapid prototyping and rapid tooling and rapid manufacturing, Berlin, Germany
Schleifenbaum H, Meiners W, Wissenbach K, Hinke C (2010) Individualized production by means of high power selective laser melting. CIRP J Manuf Sci Technol 2:161–169
Schmitt R, Pfeifer T (2010) Qualitätsmanagement. Strategien, Methoden, Techniken, 4th edn. Hanser
Schmitt R, Vorspel-Rueter M, Wienholdt H (2010) Handhabung von Komplexitaet in flexiblen Produktionssystemen. Ind Manag 26(1):53–56
Schomburg E (1980) Entwicklung eines betriebspsychologischen Instrumentariums zur systematischen Ermittlung der Anforderungen an EDV-gestuetzte Produktionsplanungs- und -steuerungssysteme im Maschinenbau. Dissertation, RWTH Aachen
Schönsleben P (2007) Integrales Logistikmanagement. Springer, Berlin
Schrinner H (1993) Einfluss verschiedener Legierungselemente auf die Oberflächen- und Grenzflächenspannung von Stahl und Schlacke. Dissertation, RWTH Aachen
Schuh G (1989) Gestaltung und Bewertung von Produktvarianten. Ein Beitrag zur systematischen Planung von Serienprodukten. Dissertation, RWTH Aachen
Schuh G (2005) Produktkomplexitaet managen. Strategien – Methoden – Tools, 2., ueberarb. und erw. Hanser, München
Schuh G (2006) Produktionsplanung und -steuerung. Grundlagen, Gestaltung und Konzepte, 3rd edn. Springer, Berlin
Schuh G (2007) VDMA: Effizient, schnell und erfolgreich. Strategien im Maschinen- und Anlagenbau, 1st edn. VDMA, Frankfurt a. M.
Schuh G, Schöning S, Jung M, Uam JY (2007a) Individualisierte Produktion. ZWF 102(10):630–634
Schuh G, Schöning S, Jung M, Uam JY, Hinke C, Kupke D, Meyer J, Vorspel-Rueter M, Wienholdt H (2007b) Integrierte Produktionstechnik. In: Schuh G, Klocke F, Brecher C, Schmitt R (eds) Excellence in production. Festschrift fuer Univ.-Prof. Dr.-Ing. Dipl.-Wirt. Ing. Dr. techn. h.c. Dr. oec. h.c. Walter Eversheim. Apprimus Wissenschaftsverlag, Aachen, pp 31–53
Schuh G, Klocke F, Brecher C, Schmitt R (2007c) Excellence in production, 1st edn. Apprimus Wissenschaftsverlag, Aachen
Schuh G et al (2008) Lean Innovation. Auf dem Weg zur Systematik. In: Schuh G, Klocke F, Brecher C, Schmitt R (eds) Wettbewerbsfaktor Produktionstechnik. Aachener Perspektiven. Apprimus Wissenschaftsverlag, Aachen, pp 473–512
Schuh G, Lenders M, Arnoscht J (2009) Focussing product innovation and fostering economies of scale based on adaptive product platforms. CIRP Ann 58(1):131–134
Schuh G, Lenders M, Nussbaum C (2010a) Maximaler Wirkungsgrad von Produktkomplexitaet. Kosten und Nutzen integriert Bewerten. ZWF 105(5):473–477
Schuh G, Arnoscht J, Lenders M, Rudolf S (2010b) Effizienter innovieren mit Produktbaukaesten. Werkzeugmaschinenlabor WZL der RWTH Aachen, Aachen
Schuh G, Arnoscht J, Rudolf S (2010c) Integrated development of modular product platforms. PICMET 2010 proceedings, pp 1928–1940
Schuh G, Arnoscht J, Bohl A, Nußbaum C (2011a) Integrative assessment and configuration of production systems. CIRP Ann 60(1):330–334
Schuh G, Arnoscht J, Bohl A, Kupke D, Nußbaum C, Quick J, Vorspel-Rüter M (2011b) Assessment of the scale-scope dilemma in production systems. Prod Eng 5(Special Issue):1–10
Schuh G, Stich V, Brosze T, Fuchs S, Pulz C, Quick J, Schuermeyer M, Bauhoff F (2011c) High resolution supply chain management – optimised processes based on self-optimizing control loops and real time data. Production Engineering, Sonderheft 1
Schwartz B, Ward A, Monterosso J, Lyubomirsky S, White K, Lehman DR (2002) Maximizing versus satisficing, happiness is a matter of choice. J Personal Soc Psychol 83(5):1178–1197
Secolec R (2005) Produktstrukturierung als Instrument zum Variantenmanagement in der methodischen Entwicklung modularer Produktfamilien. Dissertation, ETH Zuerich
Sienz J, Bulman SD, Pittman JTF (2001) Optimisation strategies for extrusion die design. Liège, Belgium, pp 275–278
Simchi A, Petzoldt F, Pohl H (2003) On the development of direct metal laser sintering for rapid tooling. J Mater Process Technol 141:319–328
Smith DE, Tortorelli DA, Tucker III CL (1998) Optimal design for polymer extrusion. Part I: sensitivity analysis for nonlinear steady-state systems. Comput Methods Appl Mech Eng 167:283–302
Spur G, Stöferle T (1994) Handbuch der Fertigungstechnik, vol 6: Fabrikbetrieb. Hanser, München
Stadtler H (2008) Supply chain management. An overview. In: Stadtler H, Kilger C (eds) Supply chain management and advanced planning. Concepts, models, software, and case studies. Springer, Berlin, pp 9–36
Steffen D (2007) Ein Verfahren zur Produktstrukturierung fuer fortgeschrittene mechatronische Systeme. Dissertation, Univ. Paderborn
Steward D (1981) The design structure system. A method for managing the design of complex systems. IEEE Trans Eng Manag 28(3):71
Stich V, Wienholdt H (2009) Flexible configuration logic for a complexity oriented design of production systems. POMS 20th Annual Conference, Orlando, FL
Straube F, Pfohl H (2008) Trends und Strategien in der Logistik. DVV, Hamburg
Su W-N et al (2003) Investigation of fully dense laser sintering of tool steel powder using a pulsed Nd:YAG (neodymium-doped yttrium aluminium garnet) laser. In: Proceedings of the institution of mechanical engineers. Vol. 217 Part C: J Mech Eng Sci, pp 127–138
Supply Chain Council (2010) Supply chain operations reference model version 10.0. The supply chain council, Cypress, TX
Sürie C, Wagner M (2008) Supply chain analysis. In: Stadtler H, Kilger C (eds) Supply chain management and advanced planning. Springer, Berlin, pp 37–64
Szarvasy I et al (2000) Computer aided optimization of profile extrusion dies: definition and assessment of the objective function. Int Polymer Process 15(1):28–39
Tempelmeier H (2005) Bestandsmanagement in supply chains. Books on Demand, Norderstedt
Ten-Hove R, Walker P (2005) Java business integration (JBI) 1.0. Final Release. http://jcp.org/aboutJava/communityprocess/final/jsr208/index.html
Thonemann U, Behrenbeck K, Kuepper J (2005) Ruder übernommen. Handel. Logistik heute 27(12):46–48
Ulrich K (1995) The role of product architecture in the manufacturing firm. Res Policy 24(3):419–440
Ulrich K, Eppinger S (2004) Product design and development, 3rd edn. McGraw-Hill, Boston
Ulrich K, Tung K (1991) Fundamentals of product modularity. Proceedings of the ASME Winter Annual Meeting Symposium on Issues in Design/Manufacturing Integration. Atlanta, GA, pp 73–79
Ungeheuer U (1986) Produkt- und Montagestrukturierung. Methodik zur Planung einer anforderungsgerechten Produkt- und Montagestruktur in Unternehmen der Einzel- und Kleinserienproduktion komplexer Produkte. Dissertation, RWTH Aachen
Vahrenkamp R (2007) Logistik. Management und Strategien, 6th edn. Oldenbourg, München
VDI-Fachbereich Produktentwicklung und Mechatronik (1997) VDI 2222. Konstruktionsmethodik. Methodisches Entwickeln von Loesungsprinzipien. VDI, Düsseldorf
VDI-Richllinie 2206: Entwicklungsmethodik für mechatronische Systeme. VDI, Düsseldorf: 2004.
Verein Deutscher Ingenieure (1993) Methodik zum Entwickeln und Konstruieren technischer Systeme und Produkte. VDI Richtlinie 2221. VDI, Düsseldorf
Wagner H (1999) Modularisierung von neuronalen Netzen. Dissertation, Univ. Bielefeld
Wagner C (2003) Untersuchungen zum Selektiven Lasersintern von Metallen. Dissertation, RWTH Aachen
Wang XC et al (2002) Direct selective laser sintering of hard metal powders: experimental study and simulation. Int J Adv Manuf Technol 19:351–357
Wannewetsch H (2010) Integrierte Materialwirtschaft und Logistik. Springer, Berlin
Werner H (2008) Supply chain management. Grundlagen, Strategien, Instrumente und Controlling. Gabler, Wiesbaden
Westkämper E, Warnecke HJ (2006) Einführung in die Fertigungstechnik. Teubner, Stuttgart
Wiendahl HP, Scholtissek P (1994), Management and control of complexity in manufacturing. CIRP Ann 43(14):533–540
Wiendahl H-H, Rempp B, Schanz M (2000) Turbulenzen erschweren Planungssicherheit. IO-Manag 69(5):38–43
Wiener N (1948) Cybernetics. Herman, Paris
Wiese H (2010) Mikrooekonomik. Springer, Berlin
Wildemann H (1998) Die modulare Fabrik. Kundennahe Produktion durch Fertigungssegmentierung. TCW, München
Willenborg E (2005) Polieren von Werkzeugstählen mit Laserstrahlung. Dissertation, RWTH-Aachen
Wohlert M (2000) HIP of direct laser sintered metal components. Dissertation, University of Texas
Wünsch G (2008) Methoden fuer die virtuelle Inbetriebnahme automatisierter Produktionssysteme. Forschungsberichte IWB, vol 215. Utz, München
Wylie B et al (2007) Performance analysis and tuning of the XNS CFD solver on BlueGene/L. Proceedings of the 14th EuroPVM/MPI conference. Springer, New York, pp 107–116
Zhang D (2004) Entwicklung des Selective Laser Melting (SLM) für Aluminiumwerkstoffe. Dissertation, RWTH Aachen.
Zolfaghari A et al (2009) An innovative method of die design and evaluation of flow balance for thermoplastics extrusion profiles. Polym Eng Sci 49:49
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Schuh, G. et al. (2012). Individualised Production. In: Brecher, C. (eds) Integrative Production Technology for High-Wage Countries. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-21067-9_3
Download citation
DOI: https://doi.org/10.1007/978-3-642-21067-9_3
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-21066-2
Online ISBN: 978-3-642-21067-9
eBook Packages: EngineeringEngineering (R0)