Skip to main content
SpringerLink
Log in
Book cover

Ultrasonic Motors pp 419–447Cite as

Testing Techniques for Ultrasonic Motors

  • Chapter

  • 2625 Accesses

Abstract

In addition to theoretical research on ultrasonic motors, we also investigate their testing techniques. Testing can not only verify the theoretical method, but also propose solutions for some problems that can not be resolved by theoretical analysis. Furthermore, the performance of the products also requires experiments according to certain standard measurement methods. Therefore, much attention has been paid to the testing techniques of USMs around the world [1]–[3]. With the broad applications of USMs in aerospace field, semiconductor manufacture field, etc., the USA and Japan conducted certain basic research on USMs under extreme environmental conditions in 1998. Russia and Germany conducted some explorations in this aspect as well. Unfortunately, these techniques and data have not been reported[4]–[7]. In 2004, the European Space Agency successfully developed USMs suitable for vacuum environments and conducted many experimental studies, including mechanical characteristics, life testing, and vacuum thermal cycling experiments. At present, research institutes in China have also been carrying out some preliminary research on testing techniques for USMs[8]–[14].

This is a preview of subscription content, log in via an institution.

Chapter
USD   29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD   219.00
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever

Tax calculation will be finalised at checkout

Purchases are for personal use only

Learn about institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. A M Flynn. Performance of ultrasonic mini-motors using design of experiments. Smart Material Structures, 1998, 7(3): 286–294.

    Article  Google Scholar 

  2. A Endo, N Sasaki. Investigation of friction material for ultrasonic motor. Japanese Journal of Applied Physics, 1987, 26(1): 197–199.

    Article  Google Scholar 

  3. B Armstrong. Friction: experimental determination, modeling and compensation. IEEE 1998 ICRA, 1998, 3: 1422–1427.

    Google Scholar 

  4. T Morita, S Takahashi, H Asama, et al. Rotational feed through using an ultrasonic motor and its performance in ultra high vacuum conditions. Vacuum, 2003, 65: 53–57.

    Article  Google Scholar 

  5. T Morita, T Niino, H Asama. Rotational feedthrough using ultrasonic motor for high vacuum condition. Vacuum, 2002, 65:85–90.

    Article  Google Scholar 

  6. I Takaaki, M Eiichi, N Kentro, et al. Characteristics of ultrasonic motor driven in a vacuum. Japanese Journal of Applied Physics, 1998, 37: 2956–2959.

    Article  Google Scholar 

  7. M F Six, R L Letty, R Seiler, et al. Rotating piezoelectric motors for high precision positioning & space applications. 9th International Conference on Nerv Actuators. Bremen, Germany, 2004:714–717.

    Google Scholar 

  8. Na Su. Experiment Study on Ultrasonic Motor in Abnormal Environment. Dissertation for the Degree of Master. Nanjing: Nanjing University of Aeronautics and Astronautics, 2007. (in Chinese)

    Google Scholar 

  9. Qing He, Wolfgang Seemann. Modal analysis of a ring type linear ultrasonic traveling wave motor. Piezoelectric and Acoustooptics, 2003, 25(6): 514–516. (in Chinese)

    Google Scholar 

  10. Na Su, Dan Lu, Chunsheng Zhao. Experimental research on load characteristics of ultrasonic motor under vacuum condition. Journal of Vibration, Measurement and Diagnosis, 2006, 26(S2): 151–153. (in Chinese)

    Google Scholar 

  11. Yonggeng Lu, Chunsheng Zhao. Research and manufacture of pre-pressure regulate apparatus for ultrasonic motor based on single chip microprocessor. Piezoelectric and Acoustooptics, 2006, 28(1): 51–52. (in Chinese)

    MathSciNet  Google Scholar 

  12. Yuebo Ji, Chunsheng Zhao, Shuren Qin. Exciting signal for ultrasonic motor testing basing on personal computer. J ournal of Chongqing University, 2006, 29(1): 12–14. (in Chinese)

    Google Scholar 

  13. Chunsheng Zhao. Some proposals for development of ultrasonic motor techniques in China. Micromotors Servo Technique, 2006, 39(2): 64–67. (in Chinese)

    Google Scholar 

  14. Cunyue Lu, Jie Li, Chunsheng Zhao, et al. Experimental tests of longitudinaltorsional ultrasonic motors, journal of Tsinghua University (Science and Technology), 2006, 46(6): 851–854. (in Chinese)

    Google Scholar 

  15. Azhou Zhang, Kerong Zhang, Qihang Yao, et al. Vibration Environment Engineer. Beijing: Aviation Industry Press, 1986. (in Chinese)

    Google Scholar 

  16. Chuanrong Zhou, Chunsheng Zhao. Parameter Identification and Its Application of Mechanical Vibration. Beijing: Science Press, 1989. (in Chinese)

    Google Scholar 

  17. Chunsheng Zhao, Weiqing Huang. Experimental study on ultrasonic motors (USMs). Journal of Vibration, Measurement and Diagnosis, 2003, 23(1): 1–5. (in Chinese)

    MathSciNet  MATH  Google Scholar 

  18. Zhenhua Xiong. Study on Dynamic Characteristics of Stator of Piezoelectric Ultrasonic Motor. Dissertation for the Degree of Master. Nanjing: Nanjing University of Aeronautics and Astronautics, 1998. (in Chinese)

    Google Scholar 

  19. Zhenhua Xiong, Chunsheng Zhao, Qidong Chen. Study on modal characteristics of stator of flex-torsion coupling ultrasonic motor based on standing wave. The 8th Modal Analysis and Experiment Conference in China. Shanxi, 1998: 98–103. (in Chinese)

    Google Scholar 

  20. http://www.Polytec.com

    Google Scholar 

  21. Hui Guo. Study on Ultrasonic Motor Based on In-plane Vibration Mode. Dissertation for the Degree of Doctor of Philosophy. Nanjing: Nanjing University of Aeronautics and Astronautics, 2001. (in Chinese)

    Google Scholar 

  22. Yuebo Ji, Chunsheng Zhao. Test system for ultrasonic motors in-plane vibration modal testing. Chinese Journal of Mechanical Engineering, 2006, 42(2): 110–114. (in Chinese)

    Article  Google Scholar 

  23. Guoguang Yang. Measurement Technology of Modern Optics. Hangzhou: Zhejiang University Press, 1997. (in Chinese)

    Google Scholar 

  24. Yongming Bai, Yuebo Ji, Weiqing Huang. Test system for ultrasonic motors in-plane vibration based on LDV. The 11th China Small Motor Technology Conference. Shanghai: No. 21 Research Institute of CETC, 2006: 182–183. (in Chinese)

    Google Scholar 

  25. Yuebo Ji. Measurement System for Ultrasonic Motors In-plane Vibration Modal Testing. Post-doctoral Report. Nanjing: Nanjing University of Aeronautics and Astronautics, 2006. (in Chinese)

    Google Scholar 

  26. Yongming Bai. Study on Measurement System for In-plane Vibration Modal. Dissertation for the Degree of Master. Nanjing: Nanjing University of Aeronautics and Astronautics, 2007. (in Chinese)

    Google Scholar 

  27. Yonggeng Lu, Chunsheng Zhao. Program design for pre-pressure regulate apparatus of USM. Machinery and Electronics, 2004(10): 38–40. (in Chinese)

    Google Scholar 

  28. Qingqing Han. Experiment Study on Pre-pressure of Ultrasonic Motor. Dissertation for the Degree of Master. Nanjing: Nanjing University of Aeronautics and Astronautics, 2006. (in Chinese)

    Google Scholar 

  29. Ming Yang, Chunsheng Zhao. The property test of annular traveling wave ultrasonic motor by measuring step response. Piezoelectric and Acoustooptics, 1998, 20(5): 347–394. (in Chinese)

    Google Scholar 

  30. Shoulin Shen, Chunsheng Zhao, Weiqing Huang. Wavelet transform applied to testing and analysis on instantaneous characteristic of ultrasonic motor. IEEE International Ultrasonic Symposium, 2003, 2:1778–1781.

    Google Scholar 

  31. Chunsheng Zhao, Shoulin Shen. Test and analysis of starting-up and stopping response characteristics of ultrasonic motor using wavelet transformation. Journal of Data Acquisition and Processing, 2004, 19(4): 376–380. (in Chinese)

    Google Scholar 

  32. Ming Yang, Chunsheng Zhao. The simulation and test of the annular traveling wave ultrasonic motor. Acta Acustica, 1999, 24(5): 484–490. (in Chinese)

    MathSciNet  Google Scholar 

  33. Heling Su. Mathematical Mode and Simulation of Standing Wave Type Ultrasonic Motor Driven by Single Phase Singal. Dissertation for the Degree of Master. Nanjing: Nanjing University of Aeronautics and Astronautics, 2001. (in Chinese)

    Google Scholar 

  34. Shoulin Shen, Chunsheng Zhao. Starting characteristic testing and analysis of ultrasonic motor based on wavelet transformation. Wavelet Analysis and Its Applications (WAA). Chongqing, China, 2003: 914–419.

    Google Scholar 

  35. Shoulin Shen. Study on Measurement Technology of Ultrasonic Motor. Post-doctoral Report. Nanjing: Nanjing University of Aeronautics and Astronautics, 2004. (in Chinese)

    Google Scholar 

  36. Aiwen Gu, Weiqing Huang. Experiment of ultrasonic motor in vibration environment. Journal of Vibration Engineering, 18(S): 141–144. (in Chinese)

    Google Scholar 

  37. Aiwen Gu. Experiment Study of Ultrasonic Motor in Vibration Environment. Dissertation for the Degree of Master. Nanjing: Nanjing University of Aeronautics and Astronautics, 2006. (in Chinese)

    Google Scholar 

  38. Dan Lu, Na Su. Experiment study of ultrasonic motor in vibration environment. The 11th China Small Motor Technology Conference. Shanghai: No. 21 Research Institute of CETC, 2006: 175–177. (in Chinese)

    Google Scholar 

  39. Dan Lu. Study on Environmental Experiments for Traveling Wave Type Rotary Ultrasonic motor. Nanjing: A dissertation for the Degree of PhD of Nanjing University of Aeronautics and Astronautics, 2008.

    Google Scholar 

  40. Qianwei Chen, Weiqing Huang, Chunsheng Zhao. Measurement of service life of ultrasonic motors (USM). Journal of Vibration, Measurement and Diagnosis, 2004, 24(1): 19–22. (in Chinese)

    Google Scholar 

  41. Qianwei Chen. Study on Experiment Technologies of Ultrasonic Motor. Dissertation for the Degree of Master. Nanjing: Nanjing University of Aeronautics and Astronautics, 2004.

    Google Scholar 

  42. Wei Zheng, Chunsheng Zhao. Study on life experiment of traveling wave type ultrasonic motor. The 11th China Small Motor Technology Conference. Shanghai: No. 21 Research Institute of CETC, 2006: 171–174. (in Chinese)

    Google Scholar 

  43. Wei Zheng, Chunsheng Zhao. Study on wear mechanism of traveling wave type ultrasonic motor. The 11th China Small Motor Technology Conference. Shanghai: No. 21 Research Institute of CETC, 2006: 136–140. (in Chinese)

    Google Scholar 

  44. Jianjun Qu. Study on Contact Model and Friction Material Characteristics of Ultrasonic Motor. Post-doctoral Report. Nanjing: Nanjing University of Aeronautics and Astronautics, 2001. (in Chinese)

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Precision Driving Laboratory, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China

    Chunsheng Zhao

Authors
  1. Chunsheng Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

Copyright information

© 2011 Science Press Beijing and Springer Verlag Berlin Heidelberg

About this chapter

Cite this chapter

Zhao, C. (2011). Testing Techniques for Ultrasonic Motors. In: Ultrasonic Motors. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-15305-1_14

Download citation

  • DOI: https://doi.org/10.1007/978-3-642-15305-1_14

  • Publisher Name: Springer, Berlin, Heidelberg

  • Print ISBN: 978-3-642-15304-4

  • Online ISBN: 978-3-642-15305-1

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation