Zusammenfassung
Der Leitgedanke des SFB 442 besteht in der Realisierung neuartiger umweltfreundlicher tribologischer Systeme. Bisherige tribologische Systeme werden hierbei derart modifiziert, dass die oberflächenaktiven Funktionen hochadditivierter mineralölbasierter und oftmals umweltbedenklicher Schmierstoffe auf die Werkzeug- und Bauteiloberflächen übertragen werden. Hierzu war die Entwicklung innovativer Werkstoffverbunde erforderlich, die die Aufgaben wie Verschleißschutz, Reibungsminimierung und Korrosionsschutz übernehmen können. Unter Werkstoffverbund sind in diesem Zusammenhang komplexe Systeme, bestehend aus Beschichtung und Grundwerkstoff zu verstehen, die entsprechend den auftretenden Beanspruchungen ausgelegt werden. Ein großes Potential bieten an dieser Stelle mittels PVD (Physical Vapour Deposition)-Technologien abgeschiedene Dünnschichtsysteme, da diese trotz geringer Schichtdicken (1–20 µm) beispielsweise einen hohen Verschleißschutz gewährleisten. Das geringe Aufmaß ermöglicht zudem die Beschichtung endkonturgetreuer Geometrien mit engen Form- und Maßtoleranzen, sodass mechanische Nachbehandlungen nicht mehr erforderlich sind.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literaturverzeichnis
Van Bebber, D. (2002) „PVD-Schichten in Verdrängereinheiten zur Verschleiß- und Reibungsminimierung bei Betrieb mit synthetischen Estern“, Dissertation, RWTH Aachen
Bobzin K., Lugscheider E. (2003) „Wettability of PVD compound materials by lubricants“, Surface and Coatings Technology, Bd. 165, S. 51–57
Bobzin K., Lugscheider E., Maes M., et al. (2004a) „High-performance chromium aluminium nitride PVD-coatings on roller bearings“, Surface and Coatings Technology, Bd. 188–189, S. 649–654
Bobzin K., Lugscheider E., Maes M. (2004b) „(Cr1−x,Alx)N-PVD-Niedertemperaturbeschichtung zum Verschleißschutz von Bauteilen“, Tribologie-Fachtagung, Göttingen
Bobzin K., Lugscheider E., Pinero C. (2004c) „Neue PVD-Schichtkonzepte für hoch beanspruchte Werkzeuge für umweltverträgliche Fertigungsprozesse“, Materialwissenschaft und Werkstofftechnik, Bd. 35, S. 851–857
Bobzin K., Lugscheider E., Maes M. (2004d) „PVD-Niedertemperaturbeschichtung für Bauteile zur Integration tribologischer Funktionen in die Oberfläche“, Materialwissenschaft und Werkstofftechnik, Bd. 35, S. 843–850
Bobzin K., Lugscheider E., Maes M., Krämer A. (2004e) „Tribological investigations of two different graded zirconium carbide films having regard to load, temperature and varying atmosphere“, Proc. of the 2nd Int. Conf. on Tribology in Manufacturing Processes, 16.-18.06.2004, Nyborg, Denmark
Bobzin K., Lugscheider E., Knotek O., et al. (2004f) „Investigations of the effect of (Cr1−xAlx)N coatings’ micro structure on impact toughness“, Material Research Society Symposium Proceedings, Bd. 843
Bobzin K., Maes M. (2005a) „(Cr,Al)N Beschichtungen für Hochgeschwindigkeitsspindellager“, Tribologie-Fachtagung, Göttingen
Bobzin K., Lugscheider E., Maes M. (2005b) „The effect of pulse sequence modulation and pulse energy on structural coating properties and coating composition“, Surface and Coatings Technology, Bd. 200, S. 1560–1565
Bobzin K., Lugscheider E., Pinero C. (2005c) „Relation of hardness and oxygen flow of Al2O3 coatings deposited by reactive bipolar pulsed magnetron sputtering“, Thin Solid Films, Bd. 494, S. 255–262
Bobzin K., Lugscheider E., Knotek O., et al. (2005d) „Development of multilayer TiAlN + g-Al2O3 coatings for difficult machining operations“, Materials Research Society Symposium Proceedings, Bd. 890
Bobzin K., Lugscheider E., Bagcivan N., et al. (2006a) „Measurement of friction and wear of PVD coated pistons“, ICMCTF San Diego
Bobzin K., Lugscheider E., Maes M., et al. (2006b) „Low temperature sythesis of PVD component coatings“, Vortrag. 15th International Colloquium Tribology, TAE, Esslingen
Bobzin K., Maes M., Piñero C., et al. (2006c) „Wirtschaftliche Kaltmassivumformung – Neue Werkzeugbeschichtungen machen Verzicht auf Bonderbehandlungen möglich“, Industrieanzeiger, Ausgabe 35/2006, S. 43, VDI-Z I-2006 (Special Werkzeuge 1), S. 69–70
Bobzin K., Lugscheider E., Bagcivan N., et al. (2007a) „Wear behavior of Cr1−xAlxN PVD-coatings in dry running conditions“, Wear, Bd. 263, 1274–1280
Bobzin K., Immich P., Klocke F., et al. (2007b) „Tribological and wetting behaviour of a nanolaminated PVD tool coating with a nanostructured top layer in interaction with a biodegradable lubricant for green metal forming“, ICMCTF, San Diego
Bobzin K., Bagcivan N., Goebbels N. (2008) „PVD Beschichtung von Polyetheretherketon (PEEK) zur Verschleiß- und Reibungsminimierung im Kontakt Käfig-Führungsbord eines Spindellagers“, Tribologie + Schmierungstechnik, Bd. 56. S. 11–15
Brecher C., Spachtholz G., Bobzin K., et al. (2005) „Superelastic (Cr,Al)N coatings for high end spindle bearings“, Surface and Coatings Technology, Bd. 200, S. 1783–1744
Bobzin K., Bagcivan N., Immich P., et al. (2009) „Advancement of a nanolaminated TiHfN/CrN PVD tool coating by a nano-structured CrN top layer in interaction with a biodegradable lubricant for green metal forming“, Surface and Coatings Technology, Bd. 203, S. 3184–3188
O’Brien J., Kelly P.J. (2001) „Characterisation studies of the pulsed dual cathode magnetron sputtering process for oxide films“, Surface and Coatings Technology, Bd. 142–144, S. 621–627
Cremer R., Witthaut M., Neuschütz D. (1998) „Experimental Determination of the Metastable (Ti,Al)N Phase Diagram up to 700 °C“, W.D. Cho and H.Y. Sohn, Editors, Value-Addition Metallurgy, TMS Publications, Warrendale, S. 249–258
Cremer R., Reichert K., Neuschütz D. (2001) „A composition spread approach to the optimization of (Ti,Al)N hard coatings deposited by DC and bipolar pulsed magnetron sputtering“, Surface and Coatings Technology, Bd. 142–144, S. 642–648
Cremer R., Reichert K., Neuschütz D., Erkens G., Leyendecker T. (2003) „Sputter deposition of crystalline alumina coatings“, Surface and Coatings Technology, Bd. 163–164, S. 157–163
Erdemir A., Liu Y., Meletis E.I. (1997) „Influence of environmental parameters on the frictional behaviour of DLC coatings“, Surface and Coatings Technology, Bd. 94–95, S. 463–468
Fietzke F., Goedicke K., Hempel W. (1996) „The deposition of hard crystalline Al2O3 layers by means of bipolar pulsed magnetron sputtering“, Surface and Coatings Technology, Bd. 86–87, S. 657–663
Haefer H.A. (1987) „Oberflächen- und Dünnschicht-Technologie“, Springer-Verlag, Berlin, Heidelberg, New York, London, Paris, Tokyo
Hintermann H., Boving H.J., Hänni W. (1978) „Wear resistant coating for bearing applications“, Wear, Bd. 48, S. 225–236
Hintermann H. (1984) „Reibungs- und Verschleißmindernde Schichten nach PVD und CVD“, VDI-Berichte Nr. 506
Hintermann H., Boving H.J. (1988) „TiC coated balls for bearing applications“, Vortrag IPAT Amsterdam
Holleck H. (1988) „Metastable coatings-prediction of composition and structure“, Surface and Coatings Technology, Bd. 39, S. 151–159
Holubar P., Jilek M., Sima M. (1999) „Nanocomposite nc-TiAlSiN and nc-TiN-BN coatings: their application on substrates made of cermented carbide and results of cutting tests“, Surface and Coatings Technology, Bd. 120–121, S. 184–188
Hovsepian P., Lewis D.B., Münz W.-D., et al. (1999) „Chromium nitride/niobium nitride superlattice coatings deposited by combined cathodic-arc/unbalanced magnetron technique“, Surface and Coatings Technology, Bd. 116–119, S. 727–734
Hovsepian P., Reinhard C., Ehiasarian A. (2006) „CrAlYN/CrN superlattice coatings deposited by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique“, Surface and Coatings Technology, Bd. 201/7, S. 4105–4110
Jacobs G. (1993) „Verschleißverhalten hydraulischer Pumpen und Ventile beim Betrieb mit feststoffverschmutztem Öl“, Dissertation RWTH Aachen
Klocke F., Maßmann T., Bobzin K. (2006) „Carbon based tool coatings as an approach for environmentally friendly metal forming processes“, Wear Elsevier, Bd. 260, S. 287–295
Klocke F., König W. (2008) „Fertigungsverfahren I“, Springer-Verlag
Knotek O., Lugscheider E., Zimmermann H., et al. (1997) „Corrosion and wear resistant ternary Cr-C-N coatings deposited by the arc PVD process for machining tools and machining parts“, 5th International Symposium on Advanced Materials, Islamabad
König W., Kauven R. (1987) „Einsatz TiN- und TiC-beschichteter HSS-Werkzeuge bei der Zylinderradherstellung“, Tribologie, Bd. 9
Leyendecker T., Lemmer O., Esser S. (1991) „Reibungsarme Tribosysteme durch Beschichtungen“, Tribologie und Schmierungstechnik, Bd. 38, S. 300–320
Lugscheider E., Knotek O., Löffler F., et al. (1995) „Deposition of arc TiAlN coatings with pulsed bias“, Surface and Coatings Technology 76–77, S. 700–705
Lugscheider E., Bobzin K., Möller M. (1999) „The effect of PVD layer constitution on surface free energy“, Thin Solid Films, Bd. 355–356, S. 367–373
Lugscheider E., Bobzin K., Burckhardt M., et al. (2000) „Weiterentwicklung der gradierten Metallkohlenstoffschichten ZrCg und HfCg für den Einsatz in hydraulischen Komponenten“, Tribologie-Fachtagung, Göttingen
Lugscheider E., Bobzin K., Burckhardt M., et al. (2001a) „Systematische Entwicklung gradierter ZrC und HfC Schichten für tribologische Anwendungen am Beispiel von hydraulischen Komponenten“, Tribologie und Schmierungstechnik, Bd. 48, S. 16–21
Lugscheider E., Hornig Th., Kienitz S., et al. (2001b) „Weiterentwicklung umweltverträglicher Tribosysteme in der Zerspanung mittels PVD-Technologie“, 15th International Plansee Seminar 2001, Tagungsband Vol. 2: P/M Hard Materials, S. 717
Lugscheider E., Bobzin K. (2001c) „The influence on surface free energy of PVD-coatings“, Surface and Coatings Technology, Bd. 142–144, S. 755–760
Lugscheider E., Knotek O., Bobzin K., et al. (2002) „Investigations of multifunctional Zircon Carbide Gradient PVD coatings for the application on machine parts“, 2002 MRS Fall Meeting, Boston, USA
Lugscheider E., Bobzin K., Maes M. (2003a) „Low temperature deposition of CrAlN coatings for the application on machine parts“, 3rd ICMCTF, San Diego, USA
Lugscheider E., Rambadt S., Erkens G., et al. (2003b) „Plasma Diagnostics of a (Cr, Al)N magnetron Sputter process on an industrial coating unit“, AEPSE, Je-Ju Island, Korea
Lugscheider E., Bobzin K., Maes M., Bagcivan N. (2004a) „Einfluss von Silizium-Dotierungen auf das Reibverhalten von kohlenstoffbasierten PVD-Beschichtungen“, Tribologie und Schmierungstechnik, Bd. 52, H. 6
Lugscheider E., Bobzin K., Pinero C., et al. (2004b) „Development of a superlattice (Ti,Hf,Cr)N coating for cold metal forming applications“, Surface and Coatings Technology, Bd. 177–178, S. 616–622
Michael S., Bobzin K., Krämer A., et al. (2008) „Characterization of substantial changes of different native ester-based lubricants before and after tribological application“, DGM Friction, Wear and Wear Protection, Wiley-VCH, Aachen
Mitterer C., Heuzè O., Derflinger V.-H. (1996) „Substrate and coating damage by arcing during sputtering“, Surface and Coatings Technology, Bd. 89, S. 233–238
Mitterer C., Mayrhofer P.H., Musil J. (2003) „Thermal stability of PVD hard coatings“, Vacuum, Bd. 71, S. 279–284
Murrenhoff H., Remmelmann A., Lugscheider E., et al. (1999) „Synthetische Ester und PVD-beschichtete Bauteile als Elemente umweltverträglicher Tribosysteme“, Tribologie und Schmierungstechnik, Bd. 5, S. 9–18
Oliver W.C., Pharr G. (1992) „An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments“, Journal of Materials Research, Bd. 7, S. 1564–1583
Patterson A.L. (1939) „The Scherrer formula for x-ray particle size determination“, Physical Review, Bd. 56, S. 978–982
Pulker H.K. (1985) „Verschleißschutzschichten unter Anwendung der CVD/PVD-Verfahren“, Kontakt und Studium Werkstoffe, Expert Verlag, Band 188
Raedt H.W. (2002) „Grundlagen für das schmiermittelreduzierte Tribosystem bei der Kaltumformung des Einsatzstahles 16MnCr5“, Dissertation, RWTH Aachen
Safi I. (2000) „A novel reactive magnetron sputtering technique for producing insulating oxides of metal alloys and other compound thin films“, Surface and Coatings Technology, Bd. 135, S. 48–59
Schulz H. (1992) „Beschichten von Umformwerkzeugen mit Titancarbonitrid und Chromnitrid erhöht die Standmengen“, Maschinenmarkt, Bd. 25
Sellers, J. (1998) „Asymmetric bipolar pulsed DC: The enabling technology for reactive PVD“, Surface and Coatings Technology, Bd. 98, S. 1245–1250
Stoney G.G. (1909) „The tension of metallic films deposited by electrolysis“, Proceedings of the Royal Society London A, Bd. 82, S. 172–175
Weinert K., Kötter D., Kresing I. (2006) „Präparierte Werkzeugschneidkanten optimieren das Schnittverhalten“, Produktion Spanende Fertigung, Bd. 50
Young T. (1805) „An Essay on the Cohesion of Fluids“ Philosophical Transactions Royal Society London, Bd. 95, S. 65–87
Zimmermann H. (1998) „PVD-beschichtete Schneidstoffe für moderne Zerspanungsanwendungen“, Dissertation, RWTH Aachen
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Bobzin, K., Bagcivan, N., Ewering, M., Goebbels, N., Weiß, R., Warnke, C. (2010). Entwicklung neuer PVD-Beschichtungen. In: Murrenhoff, H. (eds) Umweltverträgliche Tribosysteme. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-04997-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-642-04997-2_4
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-04996-5
Online ISBN: 978-3-642-04997-2
eBook Packages: Computer Science and Engineering (German Language)