Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur zu Kapitel 10
Hoffmann, G. und K. Dalal: Powder Met. Int. 11 (1979), 177
Tallachia, S., J. Amador, R. Reinstadler und J. Urcola: Metal Powder Report, (1995) 16–20
Talacchia, S., F. Oliveira, M. Oliviera und J. Urcola: Sintering of Modified M35M High Speed Steels in a Nitrogen Rich Atmosphere below 1150°C, In: Cadle, T. und K. Narashimhan: Advances in Powder Metallurgy & Particulate Materials, MPIF, part 17, 189–202, 1996
Dulis, E. J. und T. A. Neumeyer: Materials for Metal Cutting, The Iron and Steel Institute, London, 1970, S. 112–118
Hellman, P., H. Larker, J. B. Pfeffer und I. Strömblad: Modern Developments in Powder Metallurgy, 4 (1970) 578–582
Informationsbroschüre der Fa. Robert Zapp Werkstofftechnik GmbH „Lieferprogramm Werkzeuglegierungen“ 2004
Hellman, P. und E. Söderström: Gases in Metals, Swedish National Defence Research Institute, 1975, 161–173
Hellman, P.: High Speed Steels by Powder Metallurgy, Scandinavian Journal of Metallurgy, 27 (1998) 44–52
Tornberg, C. und A. Fölzer: Fully Dense PM Tool Steels and High Speed Steels with 3rd Generation Processing Technology, PM2001, Nizza
Hellman, P.: In: Materials by Powder Technology-PTM’93, Ed.: F. Aldinger, DGM Informationsgesellschaft-Verlag, S. 283
Göransson, M. und H.-G. Larson: The STAMP-Process-Special Steel Production by PM. Proc. of the 10th Plansee-Seminar 1981, Vol. 1, 365
Atkinson, H. V. und B. A. Rickinson: Hot Isostatic Pressing, Adam Hilger, Bristol, Philadelphia and New York, 1991
Dobranski, L. A., G. Matula, A. Varez, B. Levenfeld und J. Torralba: Structure and Properties of the heat treated high speed steel HS6-5-2 and HS12-1-5-5 produced by powder injection moulding process, Materials Science Forum, Switzerland, Trans Tech Publ., vol. 437–438, 2003, p. 133–6
Herranz, G., B. Levenfeld, A. Varez, J. Torralba und R. M. German: Metal Injection Moulding of M2 high speed steel using a polyethylene based binder, Materials Science Forum, Switzerland, Trans Tech Publications, vol. 426–432, 2003, p. 4361–6
Varez, A., B. Levenfeld und J. Torralba: Materials Science & Engineering A (Structural Materials: Properties, Microstructure and Processing), Switzerland: Elsevier, vol. A366, no. 2, 2004, p. 318–24
Queeney, R. A.: Reinforced High Speed Steels as Metal Matrix Composites; Advances in Powder Met.&Part. Mat. MPIF, Princeton, 1992, 8, 89
Pinnow, K. E., W. Stasko, J. H. Hauser und R. B. Dixon: Wear and Corrosion Resistance of Advanced High Vanadium Tool Steels, Advances in Powder Met.&Part. Mat., MPIF, Princeton, 1992, 6, 281
www.ferro-titanit.com
Piotrowiak, R. und V. Schüler: In: Pulvermetallurgie in Wissenschaft und Praxis, (2003) Bd. 19, 191–210
Moon, D. P.: Mater. Sci. Technol. 5 (1989) 754
Rösler, J. und E. Arzt: Acta metall. Mater. 38 (1990), 671
Arzt, E.: Metallische Hochleistungswerkstoffe für hohe Temperaturen: Grundlagen und Perspektiven, 2. Symposium Metallforschung 1991, 26.–29. August 1991, Dresden
Dispersionsverfestigte Hochtemperaturwerkstoffe, Informationsbroschüre der Fa. Plansee, 2004
www.specialmetals.com
Weißgärber, T. und B. Kieback: Dispersion strengthened materials obtained by mechanical alloying — an overview, J. of Metastable and Nanocrystalline Materials, Vol. 8, part 1, pp. 275–284 (2000)
Patel, S. J. und I. C. Elliott: Clean Melting of High Strength PM Disc Alloys, Int. Conf. on PM Aerospace Mat. 1991, Lausanne, Schweiz
Green, K. A., I. Lemsky und R. Gasior: Development of Isothermally Forged P/M UDIMET 720 for Turbine Disk Applications, In: Kissinger, R.: Superalloys 1996, The Minerals, Metals & Materials Society, (1996) 697–703
Donachie, M. und S. Donachie: Superalloys — A Technical Guide (2.Ed.), ASM Int. 2002, ISBN 0-87170-749-7
Jain, S., B. Ewing und C. Yin: Development of Improved Performance PM Udimet 720 Turbine Disks, In: Pollock, T., Kissinger, R., Bowman, R.: Superalloys 2000, The Materials, Metals & Minerals, 2000
Symonds, C. H., G. Eggar, G. Lewis und R. Siddall: The properties and structures of as-HIP and HIP plus forged NIMONIC Alloy AP1 (Low carbon astrology), Henry Wiggin and Co. LTD 1981
Moll, J. und J. Conway: Characteristics and Properties of As-HIP P/M Alloy 720, In: Pollock, T., Kissinger, R., Bowman, R.: Superalloys 2000, The Materials, Metals & Minerals, 2000
Iwai, K., S. Takigawa, S. Furuta, T. Tsuda und N. Kanamura: Dual Structure PM Ni-Base Superalloy Turbine Disk, Int. Conf. on PM Aerospace Mat. 1991, Lausanne, Schweiz
Werkstoffe des Maschinen-, Anlagen-und Apparatebaues, Hrsg.: W. Schatt, 4. Auflage Leipzig, Deutscher Verlag für Grundstoffindustrie 1991
Bose, A., J. Valencia, J. Spirko und R. Schmess: Powder Injection Moulding of IN 718 Alloy, Advances in Powder Metallurgy & Particulate Materials, MPIF, NJ, 1997, vol. 3, pp.18.99–18.112
Schmess, R. und J. Valencia: Mechanical Properties of Powder Injection Moulded Inconel 718, Advances in Powder Metallurgy & Particulate Materials, MPIF, Princeton, NJ, 1998, part 5, pp. 5.107–5.118
Diehl, W., H. Buchkremer, H. Kaiser und D. Stöver: Spritzgießen von Superlegierungen und deren kapsellose HIP-Behandlung, Werkstoff und Innovation, 1 (1998) [4] 48–51
Kraus, M.: Metal Injection Moulding of Aeroengine Components, Proc. Of Euro PM 2000, Materials and Processing Trends for PM Components in Transportation, European Powder Metallurgy Association, 2000, pp. 73–80
Wohlfromm, H., A. Ribbens, J. Maat und M. Blömacher: Metal Injection Moulding of Nickel Base Superalloys for High Temperature Applications, Proc. Of Euro PM2003, Valencia, Spain, vol. 3, p. 207–215
Sporer, K. und G. Korb: PM 2000 — An iron base ODS sheet alloy for advanced combustion system and other high temperature applications in corrosive environments, Int. Conf. on PM Aerospace Mat. 1991, Lausanne, Schweiz
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
(2007). Hochdichte und hochlegierte Sinterwerkstoffe. In: Schatt, W., Wieters, KP., Kieback, B. (eds) Pulvermetallurgie. VDI-Buch. Springer, Berlin, Heidelberg . https://doi.org/10.1007/978-3-540-68112-0_10
Download citation
DOI: https://doi.org/10.1007/978-3-540-68112-0_10
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-23652-8
Online ISBN: 978-3-540-68112-0
eBook Packages: Life Science and Basic Disciplines (German Language)