Abstract
This chapter describes the research done on polyolefin blends over the past four years. It does not only concentrate on polyolefin/polyolefin blends, but also include blends of polyolefins with other polymers. The main scientific findings of the research, as well as the most important practical applications, are summarized.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
J.-G. Gai, Y. Zuo, Metastable region of phase diagram: optimum parameter range for processing ultrahigh molecular weight polyethylene blends. J. Mol. Model. 18, 2501–2512 (2012)
Y. An, R.-Y. Bao, Z.-Y. Liu, X.-J. Wu, W. Yang, B.-H. Xie, M.-B. Yang, Unusual hierarchical structures of mini-injection molded isotactic polypropylene/ultrahigh molecular weight polyethylene blends. Eur. Polym. J. 49, 538–548 (2013)
Y. An, L. Gu, Y. Wang, Y.-M. Li, W. Yang, B.-H. Xie, M.-B. Yang, Morphologies of injection molded isotactic polypropylene/ultra high molecular weight polyethylene blends. Mater. Des. 35, 633–639 (2012)
W. Shao, Y. Zhang, Z. Wang, Y. Niu, R. Yue, W. Hu, Critical content of ultrahigh-molecular-weight polyethylene to induce the highest nucleation rate for isotactic polypropylene in blends. Ind. Eng. Chem. Res. 51, 15953–15961 (2012)
Y.-F. Huang, J.-Z. Xu, J.-Y. Xu, Z.-C. Zhang, B.S. Hsiao, L. Xu, Z.-M. Li, Self-reinforced polyethylene blend for artificial joint application. J. Mater. Chem. B 2, 971–980 (2014)
D. Xu, Y. Song, X. Shi, P. Tang, M. Matsuo, Y. Bin, Temperature dependence of lamellae orientation of a branched low molecular weight polyethylene/ultrahigh molecular weight polyethylene blend film under a controlled temperature gradient. Polymer 54, 4037–4044 (2013)
D. Xu, Y. Song, X. Shi, P. Tang, M. Matsuo, Y. Bin, Temperature dependence of lamellae orientation of a branched low molecular weight polyethylene/ultrahigh molecular weight polyethylene blend film under a controlled temperature gradient. Polymer 54, 4037–4044 (2013)
Y. Chen, H. Zou, M. Liang, P. Liu, Rheological, thermal, and morphological properties of low-density polyethylene/ultra-high-molecular-weight polyethylene and linear low-density polyethylene/ultra-high-molecular-weight polyethylene blends. J. Appl. Polym. Sci. 129, 945–953 (2013)
Yu.V. Zavgorodnev, K.A. Prokhorov, G.Yu. Nikolaeva, E.A. Sagitova, P.P. Pashinin, T.M. Ushakova, L.A. Novokshonova, E.E. Starchak, V.G. Krasheninnikov. Raman structural study of reactor blends of ultrahigh molecular weight polyethylene and random ethylene/1-hexene copolymers. Laser Phys. 23, 025701 (8 pp) (2013)
T.M. Ushakova, E.E. Starchak, V.G. Krasheninnikov, V.G. Grinev, T.A. Ladygina, L.A. Novokshonova, Influence of copolymer fraction composition in ultrahigh molecular weight polyethylene blends with ethylene/1-hexene copolymers on material physical and tensile properties. J. Appl. Polym. Sci. 131, 40151 (2014)
H.-J. Radusch, I. Kolesov, U. Gohs, G. Heinrich, Multiple shape-Memory behavior of polyethylene/polycyclooctene blends cross-linked by electron irradiation. Macromol. Mater. Eng. 297, 1225–1234 (2012)
H. Liu, S.-C. Li, Y. Liu, M. Iqbal, Thermostimulative shape memory effect of linear low-density polyethylene/polypropylene (LLDPE/PP) blends compatibilized by crosslinked LLDPE/PP Blend (LLDPE–PP). J. Appl. Polym. Sci. 122, 2512–2519 (2011)
J. Zhao, M. Chen, X. Wang, X. Zhao, Z. Wang, Z.-M. Dang, L. Ma, G.-H. Hu, F. Chen, Triple shape memory effects of cross-linked polyethylene/polypropylene blends with cocontinuous architecture. ACS Appl. Mater. Interfaces 5, 5550–5556 (2013)
R. Hoeher, T. Raidt, C. Krumm, M. Meuris, F. Katzenberg, J.C. Tiller, Tunable multiple-shape memory polyethylene blends. Macromol. Chem. Phys. 214, 2725–2732 (2013)
I. Kolesov, O. Dolynchuk, S. Borreck, H.-J. Radusch, Morphology-controlled multiple one- and two-way shape-memory behavior of cross-linked polyethylene/poly(ε-caprolactone) blends. Polym. Adv. Technol. doi:10.1002/pat.3338
Y. Lin, G.R. Marchand, A. Hiltner, E. Baer, Adhesion of olefin block copolymers to polypropylene and high density polyethylene and their effectiveness as compatibilizers in blends. Polymer 52, 1635–1644 (2011)
R. Su, Z. Li, H. Bai, K. Wang, Q. Zhang, Q. Fu, Z. Zhang, Y. Men, Flow-induced epitaxial growth of high density polyethylene in its blends with low crystallizable polypropylene copolymer. Polymer 52, 3655–3660 (2011)
P. Deng, B. Whiteside, F. Wang, K. Norris, J. Zhang, Epitaxial growth and morphological characteristics of isotactic polypropylene/polyethylene blends: Scale effect and mold temperature. Polym. Testing 34, 192–201 (2014)
P. Deng, K. Liu, L. Zhang, H. Liu, T. Wang, J. Zhang, Micro and macro injection molded parts of isotactic polypropylene/polyethylene blends: Shear-induced crystallization behaviors and morphological characteristics. J. Macromol. Sci. Part B Phys. 53, 24–39 (2014)
R. Su, K. Wang, Q. Zhang, F. Chen, Q. Fu, N. Hu, E. Chen, Epitaxial crystallization and oriented structure of linear low-density polyethylene/isotactic polypropylene blends obtained via dynamic packing injection molding. Polym. Adv. Technol. 22, 225–231 (2011)
J.K. Keum, Y. Mao, F. Zuo, B.S. Hsiao, Flow-induced crystallization precursor structure in high molecular weight isotactic polypropylene (HMW-iPP)/low molecular weight linear low density polyethylene (LMW-LLDPE) binary blends. Polymer 54, 1425–1431 (2013)
F. Rybnikar, M. Kaszonyiova, Epitaxial crystallization of linear polyethylene in blends with Isotactic polypropylene. J. Macromol. Sci. Part B Phys. 53, 217–232 (2014)
H.-W. Shen, B.-H. Xie, W. Yang, M.-B. Yang, Thermal and rheological properties of polyethylene blends with bimodal molecular weight distribution. J. Appl. Polym. Sci. 129, 2145–2151 (2013)
H. Shen, B. Xie, W. Yang, M. Yang, Non-isothermal crystallization of polyethylene blends with bimodal molecular weight distribution. Polym. Testing 32, 1385–1391 (2013)
G. Shen, H. Shen, B. Xie, W. Yang, M. Yang, Crystallization and fracture behaviors of high-density polyethylene/linear low-density polyethylene blends: The influence of short-chain branching. J. Appl. Polym. Sci. 129, 2103–2111 (2013)
X. Sun, G. Shen, H. Shen, B. Xie, W. Yang, M. Yang, Co-crystallization of blends of high-density polyethylene with linear low-density polyethylene: An investigation with successive self-nucleation and annealing (SSA) technique. J. Macromol. Sci. Part B Phys. 52, 1372–1387 (2013)
Y. Sun, S. Fischer, Z. Jiang, T. Tang, S.S. Funari, R. Gehrke, Y. Men, Morphological changes of linear, branched polyethylenes and their blends during crystallization and subsequent melting by synchrotron SAXS and DSC. Macromol. Symp. 312, 51–62 (2012)
Y.J. Lee, C.R. Snyder, A.M. Forster, M.T. Cicerone, W.-L. Wu, Imaging the molecular structure of polyethylene blends with broadband coherent Raman microscopy. ACS Macro Lett. 1, 1347–1351 (2012)
N.K. Madi, Thermal and mechanical properties of injection molded recycled high density polyethylene blends with virgin isotactic polypropylene. Mater. Des. 46, 435–441 (2013)
C. Fang, L. Nie, S. Liu, R. Yu, N. An, S. Li, Characterization of polypropylene–polyethylene blends made of waste materials with compatibilizer and nano-filler. Compos. B 55, 498–505 (2013)
S. Satapathy, G.B. Nando, A. Nag, Dynamic mechanical analysis of electron beam irradiated waste polyethylene and its blends with virgin high density and low density polyethylene. J. Elastomers Plast. 43, 33–48 (2011)
N. Mieda, M. Yamaguchi, Flow instability for binary blends of linear polyethylene and long-chain branched polyethylene. J. Nonnewton. Fluid Mech. 166, 231–240 (2011)
Y.-H. Niu, Z.-G. Wang, X.-L. Duan, W. Shao, D.-J. Wang, J. Qiu, Thermal oxidation-induced long chain branching and its effect on phase separation kinetics of a polyethylene blend. J. Appl. Polym. Sci. 119, 530–538 (2011)
N. Robledo, J.F. Vega, J. Nieto, J. Martínez-Salazar, Role of the interface in the melt-rheology properties of linear low-density polyethylene/low-density polyethylene blends: Effect of the molecular architecture of the dispersed phase. J. Appl. Polym. Sci. 119, 3217–3226 (2011)
S. Taglialatela Scafati, L. Boragno, S. Losio, S. Limbo, M. Castellano, M.C. Sacchi, P. Stagnaro. Modulation of barrier properties of monolayer films from blends of polyethylene with ethylene-co-norbornene. J. Appl. Polym. Sci. 121, 3020–3027 (2011)
C. Kock, N. Aust, C. Grein, M. Gahleitner, Polypropylene/polyethylene blends as models for high-impact propylene-ethylene copolymers, Part 2: Relation between composition and mechanical performance. J. Appl. Polym. Sci. 130, 287–296 (2013)
C. Kock, M. Gahleitner, A. Schausberger, E. Ingolic, Polypropylene/polyethylene blends as models for high-impact propylene-ethylene copolymers, Part 1: Interaction between rheology and morphology. J. Appl. Polym. Sci. 128, 1484–1496 (2013)
O.Y. Alothman, Processing and characterization of high density polyethylene/ethylene vinyl acetate blends with different VA contents. Adv. Mater. Sci. Eng., 635693, 10 pp (2012)
A. Iannaccone, S. Amitrano, R. Pantani, Rheological and mechanical behavior of ethyl vinyl acetate/low density polyethylene blends for injection molding. J. Appl. Polym. Sci. 127, 1157–1163 (2013)
Y. Chen, H. Zou, M. Liang, Y. Cao, Melting and crystallization behaviour of partially miscible high density polyethylene/ethylene vinyl acetate copolymer (HDPE/EVA) blends. Thermochim. Acta 586, 1–8 (2014)
B. Wang, M. Wang, Z. Xing, H. Zeng, G. Wu, Preparation of radiation crosslinked foams from low-density polyethylene/ethylene vinyl acetate (LDPE/EVA) copolymer blend with a supercritical carbon dioxide approach. J. Appl. Polym. Sci. 127, 912–918 (2013)
X. Zhang, H. Yang, Y. Song, Q. Zheng, Influence of crosslinking on crystallization, rheological and mechanical behaviours of high density polyethylene/ethylene-vinyl acetate copolymer blends. Polym. Eng. Sci. (2014). doi:10.1002/pen.23843
F. Chen, M.P. Wolcott, Miscibility studies of paraffin/polyethylene blends as form-stable phase change materials. Eur. Polym. J. 52, 44–52 (2014)
M.E. Sotomayor, I. Krupa, A. Várez, B. Levenfeld, Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials. Renewable Energy 68, 140–145 (2014)
S. Liu, W. Yu, C. Zhou, Molecular self-assembly assisted liquid–liquid phase separation in ultrahigh molecular weight polyethylene/liquid paraffin/dibenzylidene sorbitol ternary blends. Macromolecules 46, 6309–6318 (2013)
B.Y. Shin, D.H. Han, Morphological and mechanical properties of polyamide 6/linear low density polyethylene blend compatibilized by electron-beam initiated mediation process. Radiat. Phys. Chem. 97, 198–207 (2014)
G.-M. Lin, G.-X. Sui, R. Yang, Mechanical and shape-memory properties of polyamide/maleated polyethylene/linear low-density polyethylene blend. J. Appl. Polym. Sci. 126, 350–357 (2012)
F. Xiang, Y. Shi, X. Li, T. Huang, C. Chen, Y. Peng, Y. Wang, Cocontinuous morphology of immiscible high density polyethylene/polyamide 6 blend induced by multiwalled carbon nanotubes network. Eur. Polymer J. 48, 350–361 (2012)
A. Argoud, L. Trouillet-Fonti, S. Ceccia, P. Sotta, Morphologies in polyamide 6/high density polyethylene blends with high amounts of reactive compatibilizer. Eur. Polymer J. 50, 177–189 (2014)
S. Mallick, B.B. Khatua, Morphology and properties of nylon6 and high density polyethylene blends in absence and presence of nanoclay. J. Appl. Polym. Sci. 121, 359–368 (2011)
A. Sharif-Pakdaman, J. Morshedian, Y. Jahani, Effect of organoclay and silane grafting of polyethylene on morphology, barrierity, and rheological properties of HDPE/PA6 blends. J. Appl. Polym. Sci. 127, 1211–1220 (2013)
S. Charoenpongpool, M. Nithitanakul, B.P. Grady, Melt-neutralization of maleic anhydride grafted on high-density polyethylene compatibilizer for polyamide-6/high-density polyethylene blend: effect of neutralization level on compatibility of the blend. Polym. Bull. 70, 293–309 (2013)
I. Labaume, J. Huitric, P. Médéric, T. Aubry, Structural and rheological properties of different polyamide/polyethylene blends filled with clay nanoparticles: a comparative study. Polymer 54, 3671–3679 (2013)
F.P. La Mantia, P. Fontana, M. Morreale, M.C. Mistretta, Orientation induced brittle-ductile transition in a polyethylene/polyamide 6 blend. Polym. Testing 36, 20–23 (2014)
S.-J. Liu, W.-R. Lin, K.-Y. Lin, Morphological development in water assisted injection molded polyethylene/polyamide-6 blends. Polym. Adv. Technol. 22, 2062–2068 (2011)
M.E. Córdova, A.T. Lorenzo, A.J. Müller,* L. Gani, S. Tencé-Girault, L. Leibler, The influence of blend morphology (co-continuous or sub-micrometer droplets dispersions) on the nucleation and crystallization kinetics of double crystalline polyethylene/polyamide blends prepared by reactive extrusion. Macromol. Chem. Phys. 212, 1335–1350 (2011)
D.M. Stelescu, A. Airinei, M. Homocianu, N. Fifere, D. Timpu, M. Aflori, Structural characteristics of some high density polyethylene/EPDM blends. Polym. Testing 32, 187–196 (2013)
P.V. Anil Kumar, S. Anil Kumar, K.T. Varughese, S. Thomas, Permeation of chlorinated hydrocarbon vapors through high density polyethylene/ethylene propylene diene terpolymer rubber blends. Sep. Sci. Technol. 47, 811–818 (2012)
P.V. Anil Kumar, S. Anil Kumar, K.T. Varughese, S. Thomas, Transport properties of high-density polyethylene/ethylene propylene diene terpolymer blends. J. Mater. Sci. 47, 3293–3304 (2012)
P.V. Anil Kumar, S. Anilkumar, K.T. Varughese, S. Thomas. Transport behavior of aromatic hydrocarbons through high density polyethylene/ ethylene propylene diene terpolymer blends. Journal of Polymer Research 2012; 19:9794
M.M H. Senna, Y.K. Abdel-Moneam, Y.A. Hussein, A. Alarifi. Effects of electron beam irradiation on the structure–property behavior of blends based on low density polyethylene and styrene-ethylene-butylene-styrene-block copolymers. Journal of Applied Polymer Science 2012; 125:2384–2393
S. Utara, P. Boochathum, Novel dynamic vulcanization of polyethylene and ozonolysed natural rubber blends: Effect of curing system and blending ratio. J. Appl. Polym. Sci. 120, 2606–2614 (2011)
E. Elshereafy, M.A. Mohamed, M.M. EL-Zayat, A.A. El Miligy. Gamma radiation curing of nitrile rubber/high density polyethylene blends. J. Radioanal. Nucl. Chem. 293, 941–947 (2012)
T.K. Jayasree, P. Predeep, Non-isothermal crystallization behavior of styrene butadiene rubber/high density polyethylene binary blends. J. Therm. Anal. Calorim. 108, 1151–1160 (2012)
A.M. Maysa, Radiation vulcanization of thermoplastic low-density polyethylene/bromobutyl rubber blends. J. Thermoplast. Compos. Mater. 27, 364–378 (2014)
L. Yu, X. Liu, E. Petinakis, S. Bateman, P. Sangwan, A. Ammala, Ka. Dean, S. Wong-Holmes, Q. Yuan, C.K. Siew, F. Samsudin, Z. Ahamid. Enhancement of pro-degradant performance in polyethylene/starch blends as a function of distribution. J. Appl. Polym. Sci. 128, 591–596 (2013)
C. Cercléa, P. Sarazinb, B.D. Favis, High performance polyethylene/thermoplastic starch blends through controlled emulsification phenomena. Carbohydr. Polym. 92, 138–148 (2013)
H. Vieyra, M.A. Aguilar-Méndez, E. San, Martín-Martínez. Study of biodegradation evolution during composting of polyethylene–starch blends using scanning electron microscopy. J. Appl. Polym. Sci. 127, 845–853 (2013)
G. Li, P. Sarazin, W.J. Orts, S.H. Imam, B.D. Favis, Biodegradation of thermoplastic starch and its blends with poly(lactic acid) and polyethylene: Influence of morphology. Macromol. Chem. Phys. 212, 1147–1154 (2011)
A.W.M. Kahar, H. Ismail, N. Othman. Effects of polyethylene-grafted maleic anhydride as a compatibilizer on the morphology and tensile properties of (thermoplastic tapioca starch)/(high-density polyethylene)/(natural rubber) blends
M. Kahar, A. Wahab, H. Ismail, N. Othman, Compatibilization effects of PE-g-MA on mechanical, thermal and swelling properties of high density polyethylene/natural rubber/thermoplastic tapioca starch blends. Polymer-Plastics Technology and Engineering 51, 298–303 (2012)
M. Kahar A. Wahab, H. Ismail, N. Othman. Effects of dynamic vulcanization on the physical, mechanical, and morphological properties of high-density polyethylene/(natural rubber)/(thermoplastic tapioca starch) dlends. Journal of Vinyl Additive Technology 2012; 18:192–197
A.W.M. Kahar, H. Ismail, N. Othman, Properties of HVA-2 vulcanized high density polyethylene/natural rubber/thermoplastic tapioca starch blends. J. Appl. Polym. Sci. 128, 2479–2488 (2013)
A.W.M. Kahar, H. Ismail, N. Othman, Morphology and tensile properties of high-density polyethylene/natural rubber/thermoplastic tapioca starch blends: The effect of citric acid-modified tapioca starch. J. Appl. Polym. Sci. 125, 768–775 (2012)
S. Garg, A. Kumar, Jana. Effect of propylation of starch with different degrees of substitution on the properties and characteristics of starch-low density polyethylene blend films. J. Appl. Polym. Sci. 122, 2197–2208 (2011)
M. Sabetzadeh, R. Bagheri, M. Masoomi, Effect of corn starch content in thermoplastic starch/low-density polyethylene blends on their mechanical and flow properties. J. Appl. Polym. Sci. 126, E63–E69 (2012)
R. Thipmanee, A. Sane, Effect of zeolite 5A on compatibility and properties of linear low-density polyethylene/thermoplastic starch blend. J. Appl. Polym. Sci. 126, E251–E258 (2012)
S. Mir, T. Yasin, P.J. Halley, H.M. Siddiqi, O. Ozdemir, A. Nguyen, Thermal and rheological effects of sepiolite in linear low-density polyethylene/starch blend. J. Appl. Polym. Sci. 127, 1330–1337 (2013)
A. Taghizadeh, P. Sarazin, B.D. Favis, High molecular weight plasticizers in thermoplastic starch/polyethylene blends. Journal of Materials Science 48, 1799–1811 (2013)
J.M. Quiroz-Castillo, D.E. Rodríguez-Félix, H. Grijalva-Monteverde, T. del Castillo-Castro, M. Plascencia-Jatomea, F. Rodríguez-Félix, P.J. Herrera-Franco, Preparation of extruded polyethylene/chitosan blends compatibilized with polyethylene-graft-maleic anhydride. Carbohydr. Polym. 101, 1094–1100 (2014)
D.E. Rodríguez-Félix, J.M. Quiroz-Castillo, H. Grijalva-Monteverde, T. del Castillo-Castro, S.E. Burruel-Ibarra, F. Rodríguez-Félix, T. Madera-Santana, R.E. Cabanillas, P.J. Herrera-Franco, Degradability of extruded polyethylene/chitosan blends compatibilized with polyethylene-graft-maleic anhydride under natural weathering. J. Appl. Polym. Sci. 131, 41045 (2014)
K. Hamad, M. Kaseem, F. Deri, Poly(lactic acid)/low density polyethylene polymer blends: Preparation and characterization. Asia-Pac. J. Chem. Eng. 7, S310–S316 (2012)
K. Hamad, Y. Gun, Ko, M. Kaseem, F. Deri. Effect of acrylonitrile–butadiene–styrene on flow behaviour and mechanical properties of polylactic acid/low density polyethylene blend. Asia-Pac. J. Chem. Eng. 9, 349–353 (2014)
G. Jiang, H.-X. Huang, Z.-K. Chen, Rheological responses and morphology of polylactide/linear low density polyethylene blends produced by different mixing type. Polym. Plast. Technol. Eng. 50, 1035–1039 (2011)
Monika, P. Upadhyaya, N. Chand, Vi Kumar, Effect of poly lactic acid on morphological, mechanical, and optical properties of compatibilized polypropylene and high density polyethylene blend. Compos. Interfaces 21, 133–141 (2014)
S.-M. Lai, K.-C. Hung, H.C. Kao, L.-C. Liu, X.F. Wang, Synergistic effects by compatibilization and annealing treatment of metallocene polyethylene/PLA blends. J. Appl. Polym. Sci. 130, 2399–2409 (2013)
S. Djellali, N. Haddaoui, T. Sadoun, A. Bergeret, Y. Grohens, Structural, morphological and mechanical characteristics of polyethylene, poly(lactic acid) and poly(ethylene-co-glycidyl methacrylate) blends. Iran. Polym. J. 22, 245–257 (2013)
G. Madhu, H. Bhunia, P.K. Bajpai, Blends of high density polyethylene and poly(L-lactic acid): mechanical and thermal properties. Polym. Eng. Sci. (2013). doi:10.1002/pen.23764
S.-T. Bee, C.T. Ratnam, L.T. Sin, T.-T. Tee, W.-K. Wonga, J.-X. Lee, A.R. Rahmat, Effects of electron beam irradiation on the structural properties of polylactic acid/polyethylene blends. Nucl. Instrum. Methods Phys. Res., B 334, 18–27 (2014)
G. Singh, H. Bhunia, A. Rajor, V. Choudhary, Thermal properties and degradation characteristics of polylactide, linear low density polyethylene, and their blends. Polym. Bull. 66, 939–953 (2011)
G. Singh, N. Kaur, H. Bhunia, P.K. Bajpai, U.K. Mandal, Degradation behaviors of linear low-density polyethylene and poly(L-lactic acid) blends. J. Appl. Polym. Sci. 124, 1993–1998 (2012)
R. Nordin, H. Ismail, Z. Ahmad, A. Rashid, Performance improvement of (linear low-density polyethylene)/poly(vinyl alcohol) blends by in situ silane crosslinking. J. Vinyl Add. Tech. 18, 120–128 (2012)
M.N.F. Norrrahim, H. Ariffin, M.A. Hassan, N.A. Ibrahimc, H. Nishida, Performance evaluation and chemical recyclability of a polyethylene/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blend for sustainable packaging. RSC Adv. 3, 24378–24388 (2013)
J. Yang, J.-Z. Liang, F.-J. Li, Melt strength and extensional viscosity of low-density polyethylene and poly(butylene succinate) blends using a melt-spinning technique. J. Macromol. Sci. Part B Phys. 51, 1715–1730 (2012)
A.V. Nand, S. Swift, B. Uy, P.A. Kilmartin, Evaluation of antioxidant and antimicrobial properties of biocompatible low density polyethylene/polyaniline blends. J. Food Eng. 116, 422–429 (2013)
A.V. Nand, S. Ray, J. Travas-Sejdic, P.A. Kilmartin, Characterization of antioxidant low density polyethylene/polyaniline blends prepared via extrusion. Mater. Chem. Phys. 135, 903–911 (2012)
T. Del Castillo-Castro, M.M. Castillo-Ortega, P.J. Herrera-Franco, D.E. Rodríguez-Félix, Compatibilization of polyethylene/polyaniline blends with polyethylene-graft-maleic anhydride. J. Appl. Polym. Sci. 119, 2895–2901 (2011)
J. Songa, A. Batrab, J.M. Regoc, C.W. Macosko, Polyethylene/polyurethane blends for improved paint adhesion. Prog. Org. Coat. 72, 492–497 (2011)
X. Wang, B. Mu, Hg Wang, Preparation and properties of thermoplastic polyurethane/ultra high molecular weight polyethylene blends. Polym. Compos. (2014). doi:10.1002/pc.23009
S. Razavia, A. Shojaeia, R. Bagheri, Binary and ternary blends of high-density polyethylene with poly(ethylene terephthalate) and polystyrene based on recycled materials. Polym. Adv. Technol. 22, 690–702 (2011)
Y. Zhang, H. Zhang, W. Guo, C. Wu, Effects of different types of polyethylene on the morphology and properties of recycled poly(ethylene terephthalate)/polyethylene compatibilized blends. Polym. Adv. Technol. 22, 1851–1858 (2011)
K.A. Tawab, S.M. Ibrahim, M.M. Magida, The effect of gamma irradiation on mechanical, and thermal properties of recycling polyethylene terephthalate and low density polyethylene (R-PET/LDPE) blend compatibilized by ethylene vinyl acetate (EVA). J. Radioanal. Nucl. Chem. 295, 1313–1319 (2013)
Y. Zhang, H. Zhang, W. Guo, C. Wu, Effects of different types of polyethylene on the morphology and properties of recycled poly(ethylene terephthalate)/polyethylene compatibilized blends. Polym. Adv. Technol. 22, 1851–1858 (2011)
Y.-Y. Cui, B.-J. Dong, B.-L. Li, S.-C. Li, Properties of polypropylene/poly(ethylene terephthalate) thermostimulative shape memory blends reactively compatibilized by maleic anhydride grafted polyethylene-octene elastomer. Int. J. Polym. Mater. Polym. Biomater. 62, 671–677 (2013)
Siddaramaiah, M.N. Satheesh Kumar, G.B. Nando, Rheological and mechanical properties of poly(ethylene acrylic acid) and low density polyethylene blends. J. Appl. Polym. Sci. 121, 3070–3077 (2011)
T. Ivanova, J. Zicans, I. Elksnite, M. Kalnins, R. Maksimov, Mechanical properties of injection-molded binary blends of polyethylene with small additions of a liquid-crystalline polymer. J. Appl. Polym. Sci. 122, 3564–3568 (2011)
S. Siengchin, T.N. Abraham, Morphology and rheological properties of high density polyethylene/fluorothermoplastics blends. J. Appl. Polym. Sci. 127, 919–925 (2013)
Y. Wang, Z. Chen, J. Chen, Y. Qu, X. Yang, Miscibility, crystallization, and morphology of the double-crystalline blends of insulating polyethylene and semiconducting poly(3-butylthiophene). J. Macromol. Sci. Part B Phys. 52, 1388–1404 (2013)
T. Kato, M.A. Hillmyer, Functionalized nanoporous polyethylene derived from miscible block polymer blends. ACS Appl. Mater. Interfaces 5, 291–300 (2013)
J.-L. Shi, L.-F. Fang, H. Zhang, Z.-Y. Liang, B.-K. Zhu, L.-P. Zhu, Effects of the extractant on the hydrophilicity and performance of high-density polyethylene/polyethylene-b-poly(ethylene glycol) blend membranes prepared via a thermally induced phase separation process. J. Appl. Polym. Sci. 130, 3816–3824 (2013)
D. Kohlhoff, M. Ohshima, Influence of polyethylene disperse domain on cell morphology of polystyrene-based blend foams. J. Cell. Plast. 50, 241–261 (2014)
P. Bhagabati, T.K. Chaki, Compatibility study of chlorinated polyethylene/ethylene methacrylate copolymer blends using thermal, mechanical, and chemical analysis. J. Appl. Polym. Sci. 131, 40316 (2014)
M. Kollár, G. Zsoldos, Investigating poly-(vinyl-chloride)-polyethylene blends by thermal methods. J. Therm. Anal. Calorim. 107, 645–650 (2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Luyt, A.S. (2016). Polyolefin Blends. In: Al-Ali AlMa'adeed, M., Krupa, I. (eds) Polyolefin Compounds and Materials. Springer Series on Polymer and Composite Materials. Springer, Cham. https://doi.org/10.1007/978-3-319-25982-6_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-25982-6_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-25980-2
Online ISBN: 978-3-319-25982-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)