Abstract
Many researchers have considered externally fired gas turbines (EFGT) as an option for the implementation of biomass-fueled power plants. The EFGT cycle with regeneration or the gas-vapor combined cycle using one EFGT, also known as externally fired combined cycle (EFCC), could lead to significant efficiency improvements if compared to current technology used for power generation from biomass. This work presents one improved numerical model used for the simulation of EFGT cycle. The results were obtained with a numerical model for the EFGT cycle coupled with a model for the high temperature heat exchanger (HTHE) that is necessary for the cycle implementation. The model of the heat exchanger is based in correlations for the Colburn and friction factors, obtained with CFD simulations. In previous work, the model included only laminar regime for the heat exchanger. The present work extends the correlations that describe the behavior of the heat exchanger to turbulent and transitional regimes. The updated model of the EFGT cycle is used to investigate the influence of the turbine inlet temperature over the cycle efficiency. The results obtained confirm that the pressure drop caused by the heat exchanger is one important parameter that influences the cycle efficiency. The feasibility of the EFGT cycle is discussed taking into consideration that the highest temperature in EFGT cycle is not in the turbine inlet, but in the high temperature heat exchanger.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Traverso A, Massardo A, Scarpellini R (2006) Externally fired micro-gas turbine: modelling and experimental performance. Appl Therm Eng 26(16):1935–1941
Al-Attab K, Zainal Z (2010) Performance of high-temperature heat exchangers in biomass fuel powered externally fired gas turbine systems. Renew Energy 35(5):913–920
Schulte-Fischedick J, Dreißigacker V, Tamme R (2007) An innovative ceramic high temperature plate-fin heat exchanger for EFCC processes. Appl Therm Eng 27(8–9):1285–1294
Monteiro DB, de Mello PEB (2012) Thermal performance and pressure drop in a ceramic heat exchanger evaluated using CFD simulations. Energy 45:489–496
Kautz M, Hansen U (2007) The externally-fired gas-turbine (EFGT-cycle) for decentralized use of biomass. Appl Energy 84(7–8):795–805
de Mello PEB, Monteiro DB (2012) Thermodynamic study of an EFGT (externally fired gas turbine) cycle with one detailed model for the ceramic heat exchanger. Energy 45:497–502
Sommers A, Wang Q, Han X, T’Joen C, Park Y, Jacobi A (2010) Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems: a review. Appl Therm Eng 30:1277–1291
Alm B, Imke U, Knitter R, Schygulla U, Zimmermann S (2008) Testing and simulation of ceramic micro heat exchangers. Chem Eng J 135:S179–S184
Kee RJ, Almand BB, Blasi JM, Rosen BL, Hartmann M, Sullivan NP, Zhu H, Manerbino AR, Menzer S, Coors WG, Martin JL (2011) The design, fabrication and evaluation of a ceramic counter-flow microchannel heat exchanger. Appl Therm Eng 31:2004–2012
Kays W, London A (1984) Compact heat exchangers. McGraw-Hill, New York
Abraham JP, Sparrow EM, Tong JCK (2009) Heat transfer in all pipe flow regimes: laminar, transitional/intermittent, and turbulent. Int J Heat Mass Transf 52:557–563
Manglik R, Bergles A (1995) Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger. Exp Thermal Fluid Sci 10(2):171–180
Trunec M (2011) Osmotic drying of gelcast bodies in liquid desiccant. J Eur Ceram Soc 31:2519–2524
Acknowledgements
The authors would like to acknowledge Centro Universitário da FEI and Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) for the research support.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Nomenclature
Nomenclature
- a:
-
Plate thickness (m)
- Afr :
-
Exchanger total frontal area (m2)
- b:
-
Plate spacing (m)
- Dh :
-
Hydraulic diameter (m)
- f:
-
Friction factor
- G:
-
Exchanger flow stream mass velocity (kg/s m2)
- h:
-
Enthalpy (kJ/kg)
- j:
-
Colburn factor
- L1 :
-
Exchanger external core dimension perpendicular to the flow (m)
- L2 :
-
Exchanger external core dimension perpendicular to the flow (m)
- L3 :
-
Exchanger external core dimension in the flow direction (m)
- mair :
-
Air mass flow (kg/s)
- mexaust :
-
Exaust mass flow (kg/s)
- NTU:
-
Number of transfer units
- P:
-
Pressure (Pa)
- q:
-
Heat transferred in recuperator (kJ/kg)
- Qcc :
-
Heat supplied in combustion chamber (kJ/s)
- Re:
-
Reynolds number
- U:
-
Overall heat transfer coefficient (W/m2 K)
- v:
-
Specific volume (m3/kg)
- V:
-
Volume of the heat exchanger (m3)
- We :
-
Electric net work output (W)
- Wnet :
-
Mechanical net work output (W)
- α:
-
Ratio of total transfer area of one side of exchanger to total exchanger volume (m2/m3)
- β:
-
Ratio of total transfer area of one side of exchanger to volume between plates (m2/m3)
- ε:
-
Effectiveness
- ηEG :
-
Efficiency of electric generator
- ηel :
-
Net electric efficiency
- μ:
-
Dynamic viscosity (kg/m s)
- πC :
-
Pressure ration in compressor
- πT :
-
Pressure ration in turbine
- σ:
-
Ratio of free-flow to frontal area of one side of exchanger
- act:
-
Actual
- c:
-
Cold
- f:
-
Fin
- h:
-
Hot
- max:
-
Maximum
- min:
-
Minimum
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this chapter
Cite this chapter
de Mello, P.E.B., Scuotto, S., Ortega, F.d.S., Donato, G.H.B. (2014). Influence of Turbine Inlet Temperature on the Efficiency of Externally Fired Gas Turbines. In: Dincer, I., Midilli, A., Kucuk, H. (eds) Progress in Sustainable Energy Technologies Vol II. Springer, Cham. https://doi.org/10.1007/978-3-319-07977-6_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-07977-6_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-07976-9
Online ISBN: 978-3-319-07977-6
eBook Packages: EnergyEnergy (R0)