Abstract
This chapter presents the derivation, implementation and testing of the active surge controller developed in this book. The proposed control method employs the thrust AMB to servo control the axial clearance between the impeller tip and the static shroud. Through the modulation of the impeller axial position, the disturbances associated with the initiation of the surge instability can be counteracted, and surge can be suppressed before it reaches the full amplitude of the limit cycle. The surge controller derived in this chapter is first tested in simulation to verify the theory and assumptions needed for the design of the control algorithm, and then implemented on the experimental compressor test rig in order to validate the theory and demonstrate the effectiveness of the control method in an actual industrial compressor.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bøhagen, B., Gravdahl, J.T.: On active surge control of compressors using a mass flow observer. In: Proceedings of the 41st IEEE Conference on Decision and Control, pp. 3684–3689 (2002)
Hagino, N., Kashiwabara, Y., Uda, K.: Prediction and active control of surge inception in centrifugal compressor system without plenum. In: 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (2005)
Jungowski, W.M., Weis, M.H., Price, G.R.: Pressure oscillations occurring in a centrifugal compressor system with and without passive and active surge control. J. Turbomach. 118, 29–40 (1996)
Meuleman, C.H.J.: Measurement and unsteady flow modelling of centrifugal compressor surge. PhD thesis, Technische Universiteit Eindhoven (2002)
Pampreen, R.C.: Compressor Surge and Stall. Concepts ETI, Vermont (1993)
Sanadgol, D.: Active control of surge in centrifugal compressors using magnetic thrust bearing actuation. PhD thesis, University of Virginia (2006)
Senoo, Y., Ishida, M.: Deterioration of compressor performance due to tip clearance of centrifugal impellers. J. Turbomach. 109, 55–61 (1987)
Simon, J.S., Valavani, L., Epstein, A.H., Greitzer, E.M.: Evaluation of approaches to active compressor surge stabilization. J. Turbomach. 115, 57–67 (1993)
Sparks, C.R.: On the transient interaction of centrifugal compressors and their piping systems. J. Eng. Power 105, 891–901 (1983)
van Helvoirt, J., de Jager, B.: Dynamic model including piping acoustics of a centrifugal compression system. J. Sound Vib. 302, 361–378 (2007)
Willems, F.P.T.: Modeling and bounded feedback stabilization of centrifugal compressor surge. PhD thesis, Technische Universiteit Eindhoven (2000)
Yang, W.C., Tobler, W.E.: Dissipative modal approximation of fluid transmission lines using linear friction model. J. Dyn. Syst. Meas. Control 113, 152–162 (1991)
Yoon, S.Y., Lin, Z., Lim, K.T., Goyne, C., Allaire, P.E.: Control of compressor surge with active magnetic bearings. In: Proceedings of the 49th IEEE Conference on Decision and Controls (2010)
Yoon, S.Y., Lin, Z., Lim, K.T., Goyne, C., Allaire, P.E.: Model validation for an amb-based compressor surge control test rig. J. Vib. Acoust. 132, 061005 (2010)
Zhou, K., Doyle, J.C., Glover, K.: Robust and Optimal Control. Prentice Hall, New York (1996)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Yoon, S.Y., Lin, Z., Allaire, P.E. (2013). Control of Compressor Surge. In: Control of Surge in Centrifugal Compressors by Active Magnetic Bearings. Advances in Industrial Control. Springer, London. https://doi.org/10.1007/978-1-4471-4240-9_8
Download citation
DOI: https://doi.org/10.1007/978-1-4471-4240-9_8
Publisher Name: Springer, London
Print ISBN: 978-1-4471-4239-3
Online ISBN: 978-1-4471-4240-9
eBook Packages: EngineeringEngineering (R0)