Abstract
Metal pressure processing, also known as metal plastic working, is a kind of manufacturing method, which makes use of metal plastic deformation caused under external force to obtain raw materials, blanks, or components with certain shape, size, and mechanical property.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wang K, Chen S (2006) Achievements of metal plastic working in ancient China. J Plast Eng 13(6):114–125 (In Chinese)
Zhou Y (2003) Five developmental stages of stamping technology during the 20 century in the developed countries. Mach Electr New Prod Guide 3:48–50 (In Chinese)
Zhou X, Yan Z (2005) Development of Chinese stamping industry. China Metalforming Equip Manuf Technol 1:10–16 (In Chinese)
Åkerström P (2006) Modeling and simulation of hot stamping. Doctoral Theses, Luleå University of Technology, Sweden
Berglund G (2008) The history of hardening of boron steel in northern sweden. In: 1st international conference on hot sheet metal forming of high-performance steel, Kassel, Germany, pp 175–177
Aspacher J (2008) Forming hardening concepts. In: 1st international conference on hot sheet metal forming of high-performance steel, Kassel, Germany, pp 77–81
Patent GB1490535 (1977) Manufacturing a hardened steel article, Norrbottens Jaernverk AB
Ma N, Hu P, Zhai S, Guo W (2009) Technology and application of hot forming of high strength steel. Automobile Technol Mater 12:28–30 (In Chinese)
ARCELORMITTAL (2008) Usibor 1500 and Hot-stamping[C]//AP&T press hardening seminar, AP&T press hardening proceedings, 2 Oct 2008, Dearborn. AP&T, Dearborn, pp 1–41
Naderi M, Durrenberger L, Molinari A, Bleck W (2008) Constitutive relationships for 22MnB5 boron steel deformed isothermally at high temperatures. Mater Sci Eng A 478:130–139
Garcia Aranda L, Chastel Y, Fernández Pascual J, Dal Negro T (2002) Experiments and simulation of hot stamping of quenchable steels. Adv Technol Plast 2:1135–1140
Borsetto F, Ghiotti A, Bruschi S (2009) Investigation of the high strength steel Al-Si coating during hot stamping operations. Key Eng Mater 410–411:289–296
Goedicke S, Sepeur S, Frenzer G, Breyer Ch (2008) Wet chemical coating materials for hot sheet forming–anti scaling and corrosion protection. In: 1st international conference on hot sheet metal forming of high-performance steel, Kassel, Germany, pp 37–44
Paar U, Becker HH, Alsmann M (2008) Press-hardened components from kassel–chances and challenges. In: 1st international conference on hot sheet metal forming of high-performance steel, Kassel, Germany, pp 153–163
Mori K, Ito D (2009) Prevention of oxidation in hot stamping of quenchable steel sheet by oxidation preventive oil. CIRP Ann Manuf Technol 1(58):267–270
Xu W, Guan S, AI J (2009) Key equipment and core technology of hot stamping. World Iron Steel 2:30–33 (In Chinese)
Ma N, Hu P, Guo W et al. (2009) Feasible methods applied to the design and manufacturing process of hot frming. IDDRG2009 conference, Golden, pp 835–843
Olle P, Behrens BA, Weilandt K, Lange F (2008) Numerical modeling of phase transformation in hot stamping and deep drawingdeep drawing. In: The 9th international conference on technology of plasticity, CIRP, pp 1937–1942
Oldenburg M, Åkerström P, Bergman G (2008) Simulation of the microstructure evolution in a press hardened component. In: 1st international conference on hot sheet metal forming of high-performance steel, Kassel, Germany, pp 3–13
Casas B, Latre D, Rodriguez N, Valls I (2008) Tailor made tool materials for the present and upcoming tooling solutions in hot sheet metal forming. In: 1st international conference on hot sheet metal forming of high-performance steel, Kassel, Germany, pp 23–35
Faderl J, Manzenreiter T, Radlmayr M (2008) Press hardening of hot-dip galvanized 22MnB5: A stable and reproducible process. In: 1st international conference on hot sheet metal forming of high-performance steel, Kassel, Germany, pp 199–205
Bergman G, Oldenburg M (2004) A finite element model for thermomechanical analysis of sheet metal forming. Int J Numer Meth Eng 59:1167–1186
Eriksson M, Oldenburg M, Somani MC, Karjalainen LP (2002) Testing and evaluation of material data for analysis of forming and hardening of boron steel components. Model Simul Mater Sci Eng 10:277–294
Naderi M, Durrenberger L, Molinari A et al. (2008) Constitutive relationships for 22MnB5 boron steel deformed isothermally at high temperatures. Mater Sci Eng A 478:130–139
Merklein M, Lechler J Determination of material and process characteristics for hot stamping processes of quenchenable ultra high strength steel steels with respect to a FE-based process design. SAE world congress: innovations in steel and applications of advanced high strength steels for automotive structures, paper no. 2008-0853
Mori K, Maki S, Tanaka Y (2009) Warm and hot stamping of ultra tensile strength tensile strength steel sheets using resistance heating. CIRP Ann Manuf Technol 1(54):209–212
Yanagida A, Azushima A (2009) Evaluation of coefficients of friction in hot stamping by hot flat drawing test. CIRP Ann Manuf Technol 58:247–250
MyungKi P, HyunSung S, TaiHo K et al. (2010) Formability, flow and heat transfer simulation of hot press forming b-pillar part and tools[J]. In: AIP conference proceedings, NUMIFORM2010, pp 344–347
Oh SS, Suk JY, Chang HS et al. (2010) Numerical modeling of hot press forming process of boron steel tube[J]. In: AIP conference proceedings, NUMIFORM2010, pp 1216–1222
Xing Z, Bao J, Yang Y et al. (2008) Hot stamping processing experiments of quenchable boron steel. Mater Sci Technol 16(2):172–175 (In Chinese)
Lin J, Wang L, Tian H et al. (2009) Research on hot forming behavior of ultrahigh strength steel. J Plast Eng 16(2):180–183 (In Chinese)
Wang L, Lin J, Zhu Q et al. (2008) Study on critical water flow speed of the cooling system of hot stamp shaping mould and die. J Mach Des 25(4):15–17 (In Chinese)
Ma N, Hu P, Guo W (2009) Technology and equipment of hot forming for ultra high strength steel steel [J]. Automobile Parts (45):28–30 (In Chinese)
Ma N, Hu P, Guo W, Zhai S. Methods and equipments for on-line fast detection and control in the hot forminghot forming. Application number: 200810051500.2, Publication number: CN 101623721A (In Chinese)
Hu P, Guo W, Ma N, Zhai S. High temperature intelligent robot for hot forming. Application number: 200810051498.9, Publication number: CN 101623870A (In Chinese)
Guo W, Hu P, Zhai S, Ma N. Energy efficient heating furnaceheating furnace for hot forminghot forming. Application number: 200810051499.3, Publication number: CN 101625197A (In Chinese)
Ma N, Hu P, Yan K, Guo W, Meng X, Zhai S (2010) Research on boron steel for hot forming and its application. J Mech Eng 46(14):177–181
Ma N, Hu P, Shen G et al. (2009) Model and numerical simulation of hot forming[C]/international symposium on automotive steel, ISAS conference proceedings, Sept 2009, Dalian. Metallurgical Industry Press, Beijing, pp 362–367
Ma N, Hu P, Guo W (2010) Experiments and analysis of relations among heat, stress and transformation of boron steel for hot forming. Trans Mater Heat Treat 12(5):33–40 (In Chinese)
Ma N, Wu W, Shen G, Hu P (2011) Study on hot forminghot forming for high strength steel: numerical simulation-static explicit algorithm. Chinese J Comput Mech 28(3):371–376 (In Chinese)
Ma N, Shen G et al. (2011) Study of hot forming for high strength steel: numerical simulation-dynamic explicit algorithm, Acta Mechanica Solida Sinica, accepted
Ma N, Zhang Z, Hu P, Guo W, Liu S, Shen G (2011) Microstructure and mechanical behavior of new type multi-layer metallic composite material in hot forming. J Mater Eng (5):88–92 (In Chinese)
Ma N, Zhang Z, Hu P (2011) Research on a new type of metal composite material in hot forming and its application. Adv Mater Res 156:582–591
Boqing WU (1998) The ULSAB project of world iron and steel groups. Metal World, (5):10–11 (In Chinese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Hu, P., Ma, N., Liu, Lz., Zhu, YG. (2013). The Introduction of Sheet Metal Forming Technology. In: Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming. Springer Series in Advanced Manufacturing. Springer, London. https://doi.org/10.1007/978-1-4471-4099-3_1
Download citation
DOI: https://doi.org/10.1007/978-1-4471-4099-3_1
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-4098-6
Online ISBN: 978-1-4471-4099-3
eBook Packages: EngineeringEngineering (R0)