Abstract
Devices or physical media can store some form of energy to perform a useful operation at a later time or at a different location. Energy storage reduces mismatches between the energy production and demand. For example, solar energy if stored would still be available during the night. Also, the stored energy may be a supplement during the peak demand for energy. Besides, stored energy can be transported. A battery, for example, makes it possible to use a wrist watch, a mobile phone, or a laptop computer. This chapter begins by underlying the importance of energy storage and regulation by water and hydrogen and later discusses thermal, electric, chemical, and mechanical energy storage systems. Solar energy storage by sensible and/or latent heat and for short- and long-term applications is discussed briefly. Some common phase changing materials and their usage for the latent heat storage technique are described. Underground thermal energy systems are discussed briefly. Capacitor, hydroelectric, and battery are discussed for storing electricity. Chemical energy storage by biosynthesis is briefly discussed. Later, mechanical energy storage by compressed air, flywheel, hydraulic, and springs are discussed. There are 6 example problems and 35 practice problems at the end of the chapter.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
References
Andersson O (2007) Aquifer thermal energy storage (ATES). In: Paksoy HO (ed) Thermal energy storage for sustainable energy consumption. NATO science series. Springer, Dordrecht
Çengel YA, Turner RH (2001) Fundamentals of thermal fluid sciences. McGraw-Hill, New York
Demirel Y (2007) Nonequilibrium thermodynamics: transport and rate processes in physical, chemical and biological systems, 2nd edn. Elsevier, Amsterdam
Demirel Y, Kunç S (1987) Thermal performance study on a solar air heater with packed flow passage. Energy Conver Mngmt 27:317–325
Demirel Y, Ozturk HH (2006) Thermoeconomics of seasonal heat storage system. Int J Energy Res 30:1001–1012
Demirel Y, Sandler SI (2002) Thermodynamics of bioenergetics. Biophys Chem 97:87–111
Dincer I, Rosen MA (2007) A unique borehole thermal storage system at University of Ontario Institute of Technology. In: Paksoy HO (ed) Thermal energy storage for sustainable energy consumption. NATO science series. Springer, Dordrecht
Farrell A, Plevin R et al (2006) Ethanol can contribute to energy and environmental goals. Science 311:506–508
Garby L, Larsen PS (1995) Bioenergetics. Cambridge, New York
Kempton W, Tomic J (2005) Vehicle-to-grid power fundamentals: calculating capacity and net revenue. J Power Sour 144:268–279
Kenisarin M, Mahkamov K (2007) Solar energy storage using phase change materials. Renew Sustain Energy Rev 11:1913–1965
Lee YJ et al (2009) Fabricating genetically engineered high-power lithium-ion batteries using multiple virus genes. Science 324:1051–1055
Linden D, Reddy TB (2001) Handbook of batteries. McGraw-Hill, New York
Loisel R, Mercier A, Gatzen C, Elms N, Petric H (2010) Valuation framework for large scale electricity storage in a case with wind curtailment. Energy Policy 38:7323–7337
Markel A (2007) Plug-in hybrid-electric vehicle analysis. NREL, Golden
Mehling E, Cabeza LF (2007) Phase changing materials and their basic properties. In: Paksoy HO (ed) Thermal energy storage for sustainable energy consumption. NATO Science Series. Springer, Dordrecht
Morofsky E (2007) History of thermal energy storage. In: Paksoy HO (ed) Thermal energy storage for sustainable energy consumption. NATO science series. Springer, Dordrecht
Rigden JS (2002) Hydrogen: the essential element. Harvard University Press, Cambridge
Sari A (2002) Thermal and heat transfer characteristics in a latent heat storage system using lauric acid. Energy Conver Mngmnt 43:2493–2507
Sharma A, Tyagi VV, Chen CR, Buddhi D (2009) Review on thermal energy storage with phase change materials and applications. Renew Sustain Energy Rev 13:318–345
Shiina Y, Inagaki T (2005) Study on the efficiency of effective thermal conductivities on melting characteristics of latent heat storage capsules. Int J Heat Mass Trans 48:373–383
Short W, Denholm P (2007) An evaluation of utility system impacts and benefits of plug-in hybrid electric vehicles. NREL, Golden
Solber G (2007) The magic of tesla roadster regenerative braking. In http://www.teslamotors.com/blog/magic-tesla-roadster-regenerative-braking. Accessed in July 2011
Tuncbilek K, Sari A, Tarhan S, Ergunes G, Kaygusuz K (2005) Lauric and palmitic acids eutectic mixture as latent heat storage material for low temperature heating applications. Energy 30:677–692
Tyagi VV, Buddhi D (2007) PCM thermal storage in buildings: a state of art. Renew Sustain Energy Rev 11:1146–1166
Winger J (2011) The car electric. Electric car buying guide. http://www.thecarelectric.com. Accessed in April 2011
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag London Limited
About this chapter
Cite this chapter
Demirel, Y. (2012). Energy Storage. In: Energy. Green Energy and Technology. Springer, London. https://doi.org/10.1007/978-1-4471-2372-9_8
Download citation
DOI: https://doi.org/10.1007/978-1-4471-2372-9_8
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-2371-2
Online ISBN: 978-1-4471-2372-9
eBook Packages: EngineeringEngineering (R0)