Abstract
An important issue connected to the stability of solid–liquid interfaces is that unstable interfaces, which give rise to cast microstructures that are cellular or, ultimately, even dendritic, also remain the basic cause of chemical microsegregation. Microsegregation, a chemical separation and concentration of alloy elements or impurities on small scales, has the identical thermodynamic origin as does macrosegregation, discussed in Chapter 5. The essential differences between micro- and macrosegregation are the length scales over which these phenomena operate. As a general rule, microsegregation may be removed, or at least reduced significantly, by annealing a cast sample in the solid state. By contrast, macrosegregation cannot be influenced much by annealing in the solid state.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
Note that the cellular microsegregation parameter, a, is inversely proportional to the product of the interface speed, v, times the alloy concentration, C 0. So for highly dilute alloys undergoing slow solidification rates this parameter could become large in magnitude; moreover, at sufficiently slow freezing speeds and low solute concentrations, however, the interface will re-establish marginal stability, so the interfacial cells would disappear and chemical microsegregation would cease.
References
V.R. Voller and S. Sundarraj, Int. J. Heat Mass Transf., 38 (1995) 1009.
B. Prabhakar and F. Weinberg, Metall. Mater. Trans. B, 9 (1978) 150.
M.C. Flemings, Solidification Processing, McGraw-Hill, New York, NY, 1974.
H.D. Brody and M.C. Flemings, Trans. AIME, 236 (1966) 615.
T.W. Clyne and W. Kurz, Metall. Trans., 12A (1981) 965.
I. Ohnaka, Trans. Iron Steel Inst. Jpn, 26, (1986) 1045.
S. Kobayashi, Trans. Iron Steel Inst. Jpn, 28 (1988) 725.
T. Kraft, M. Rettenmayr and H.E. Exner, Mater. Sci. Eng., 4 (1996) 161.
L. Nastac, Modelling and Simulation of Microstructure Evolution in Solidifying Alloys, Kluwer Academic Publishers, New York, NY, 2004.
B. Chalmers, Principles of Solidication, Ch. 8, 253, John Wiley & Sons, Inc., New York, 1964.
M. Rappaz, EPFL Supercomput. Rev., 8, (1996). http://sawww.epfl.ch/SIC/SA/publications/ SCR96/scr8-page11.html
J. Lipton, M.E. Glicksman and W. Kurz, Mater. Sci. Eng., 65 (1984) 57.
M. Rappaz, Ch.-A. Gandin, Acta Metall. Mater., 41 (1993) 345.
Ch.-A. Gandin, M. Rappaz and R. Tintillier, Metall. Trans. A, 25A (1994) 629.
M. Rappaz, Ch.-A. Gandin and J.-L. Desbiolles, Metall. Mater. Trans. A, 27A (1996) 695.
Ch.-A. Gandin, R.J. Schaefer and M. Rappaz, Acta Metall. Mater., 44 (1996) 3339.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2011 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Glicksman, M.E. (2011). Microsegregation. In: Principles of Solidification. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-7344-3_14
Download citation
DOI: https://doi.org/10.1007/978-1-4419-7344-3_14
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-7343-6
Online ISBN: 978-1-4419-7344-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)