This chapter will review the current and developing standards, which affect lead-free soldering. Developments in standards for lead-free soldering are not complete and are progressing with new discoveries and developments. The majority of the chapter will cover IPC standards with reference to other standards, which are considered relevant and known.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J-STD- 001D Standard (2005) Requirements for Soldered Electrical and Electronic Assemblies.
IPC-A-610D Standard (2005) Acceptability of Electronic Assemblies.
J-STD-002B Standard (2003) Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires.
J-STD-003A Standard (2003) Solderability Tests for Printed Boards.
J-STD-006B Standard (2006) Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications.
IPC-7711A/7721A Standard (2003) Rework, Repair and Modification of Electronic Assemblies.
IPC-1066 Standard (2004) Marking, Symbols and Labels for Identification of Lead-Free and Other Reportable Materials in Lead-Free Assemblies, Components and Devices.
JEDEC JESD-97 Standard (2004) Standard Marking, Symbols, and Labels for Identification of Lead (Pb) Free Assemblies, Components, and Devices.
J-STD-609 Draft Standard (2006) Marking, Symbols and Labels for Identification of Lead Free and Other Reportable Materials in Lead Free Assemblies, Components and Devices.
IPC-7095A Standard (2004) Design and Assembly Process Implementation for BGAs.
IPC-9701A Standard (2006) Standard Performance Test Methods and Qualification Requirements for Surface Mount Solder Attachments.
IPC/JEDEC J-STD-020C Standard (2004) Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Device.
IPC/JEDEC J-STD-033B Standard (2005) Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices.
JEDEC JESD22-B106C Standard (2005) Resistance to Soldering Temperature for Through-Hole Mounted Devices.
JEDEC JESD22-A111 Standard (2004) Evaluation Procedure for Determining Capability to Bottom Side Board Attach by Full Body Solder Immersion of Small Surface Mount Solid State Devices.
JEDEC JESD22A121 Standard (2005) Measuring Whisker Growth on Tin and Tin Alloy Surface Finishes.
JEDEC JESD-201 Standard (2006) Environmental Acceptance Criteria for Tin Whisker Susceptibility of Tin and Tin Alloy Surface Finishes.
IPC/JEDEC JP-002 Guideline (2006) Current Tin Whiskers Theory and Miti-gation Practices Guideline.
IPC-4101B Standard (2006) Specification for Base Materials for Rigid and Multilayer Printed Board.
IPC-7351 Standard (2005) Generic Requirements for Surface Mount Land Pattern and Design.
IPC-4552 Guideline (2002) Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards.
IPC-4553 Guideline (2005) Specification for Immersion Silver Plating for Printed Circuit Boards.
IPC-4554 Draft Guideline (2006) Draft Specification for Immersion Tin Plating for Printed Circuit Boards.
IPC-4555 Draft Guideline (2006) Draft Specification for OSP for Printed Circuit Boards.
IPC-1065 Standard (2005) Material Declaration Handbook.
IPC-1752 Standard (2006) Materials Declaration Management Standard.
IEC 62321 Draft Standard (2006) Draft Standard Procedures for the Determination of Levels for Six Regulated Substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Biphenyl Ether) in Electrotechnical Products, IEC TC 111 Working Group 3.
JEITA ED-4701 Method 301A Standard (2003) Resistance to Soldering Heat for Surface Mount Devices.
JEITA ETR-7021 Guidance Document (2004) Guidance for the lead-free marking of materials, components and mounted boards used in electronic and electrical equipment.
JIS C 0950 Standard (2005) The marking for presence of the specific chemical substances for electrical and electronic equipment.
Electronics Industry Draft Standard of the People’s Republic of China (2006) General Rules for the Environmental Use Period of Electronic Information Products.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Bath, J. (2007). Lead-Free Soldering Standards. In: Bath, J. (eds) Lead-Free Soldering. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-68422-2_10
Download citation
DOI: https://doi.org/10.1007/978-0-387-68422-2_10
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-32466-1
Online ISBN: 978-0-387-68422-2
eBook Packages: EngineeringEngineering (R0)