Abstract
Network-based applications are essential to providing intelligence to complex electromechanical processes through networked control systems (NCS). The focus of this paper is the design and application of fuzzy logic control for a type of NCSs. In order to assess its feasibility, a networked control system for high-performance milling process, a type of a complex electromechanical process, is implemented on a multi-point interface (MPI) bus, a proprietary programming interface port for peer-to-peer communications that resembles the PROFIBUS protocol. The manipulated input variable the feed rate as well as the control output variable, spindle torque, are transmitted through this network. A simple computational procedure can run remotely as an optimization function without requiring additional hardware. The results demonstrate that the Fuzzy Logic-based strategy provides accuracy, and adequate machining production time thus increasing the metal removal rate.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Zhang, K., Huang, H., Zhang, J.: MPC-based control methodology in networked control systems. In: Wang, T.-D., Li, X.-D., Chen, S.-H., Wang, X., Abbass, H.A., Iba, H., Chen, G.-L., Yao, X. (eds.) SEAL 2006. LNCS, vol. 4247, pp. 814–820. Springer, Heidelberg (2006)
Fidge, C.J., Tian, Y.-C.: Functional Analysis of a Real-Time Protocol for Networked Control Systems. In: Graf, S., Zhang, W. (eds.) ATVA 2006. LNCS, vol. 4218, pp. 446–460. Springer, Heidelberg (2006)
Yang, T., Fei, M., Xue, D., Tan, Y., Zhou, X.: A Proposed Case Study for Networked Control System. In: Huang, D.-S., Li, K., Irwin, G.W. (eds.) ICIC 2006. LNCS (LNAI), vol. 4114, pp. 1026–1036. Springer, Heidelberg (2006)
Haber, R.E., Cantillo, K., Jiménez, J.E.: Networked sensing for high-speed machining processes based on CORBA. Sensors and Actuators A: Physics 119, 418–426 (2005)
Aoki, S., Kawachi, S., Sugeno, M.: Application of fuzzy control logic for dead-time processes in a glass melting furnace. Fuzzy Sets and Systems 38, 251–265 (1990)
Zhang, L., Huag-Jing, F.: A novel controller design and evaluation for networked control systems with time-variant delays. Journal of the Franklin Institute 343, 161–167 (2006)
Almutairi, N.B., Chow, M.-Y.: PI parameterization using adaptive fuzzy modulation (AFM) for networked control systems. II. Full adaptation. In: Proc. of 28th Annual Conference of the Industrial Electronics Society (IECON02), vol. 4, November 5-8, 2002, pp. 3158–3163 (2002)
Furness, R.J., Tsao, T.T., Rankin, J.S., Muth, M.J., Manes, K.W.: Torque control for a form tool drilling operation. IEEE Transactions on Control Systems Technology 7(1), 22–30 (1999)
Liang, M., Yeap, T., Hermansyah, A., Rahmati, S.: Fuzzy control of spindle torque for industrial CNC machining. International Journal of Machine Tools and Manufacture 43, 1497–1508 (2003)
Vitturi, S.: Stochastic model of the PROFIBUS-DP cycle time. IEE Proceedings on Science Measurement Technology 151(5), 335–342 (2004)
Haber, R.E., Alique, J.R., Ros, S., Haber, R.H.: Modeling and Simulation of High-Speed Machining Processes Based on Matlab/Simulink. In: Sunderam, V.S., van Albada, G.D., Sloot, P.M.A., Dongarra, J. (eds.) ICCS 2005. LNCS, vol. 3516, pp. 627–634. Springer, Heidelberg (2005)
Lee, K.-C., Lee, S., Lee, M.-H.: Remote fuzzy logic control of networked control system via PROFIBUS-DP. IEEE Transactions on Industrial Electronics 50(4), 784–792 (2003)
Haber, R.E., Liang, S.Y., Alique, J.R., Haber-Haber, R.: Fuzzy control of spindle torque in high-speed milling processes. Journal of Manufacturing Science and Engineering 128(4), 1014–1018 (2006)
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Haber, R.E., Schmittdiel, M., Alique, A., Bustillo, A., Galán, R. (2007). Networked Control Based on Fuzzy Logic. An Application to a High-Performance Milling Process. In: Sandoval, F., Prieto, A., Cabestany, J., Graña, M. (eds) Computational and Ambient Intelligence. IWANN 2007. Lecture Notes in Computer Science, vol 4507. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-73007-1_48
Download citation
DOI: https://doi.org/10.1007/978-3-540-73007-1_48
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-73006-4
Online ISBN: 978-3-540-73007-1
eBook Packages: Computer ScienceComputer Science (R0)