2010

In-situ Studies with Photons, Neutrons and Electrons Scattering

ISBN: 978-3-642-14793-7 (Print) 978-3-642-14794-4 (Online)

Table of contents (13 chapters)

  1. Front Matter

    Pages i-xii

  2. No Access

    Book Chapter

    Pages 1-11

    In Situ Study of Phase Transformation in Steel During Welding

  3. No Access

    Book Chapter

    Pages 13-26

    In Situ Studies of Phase Transformation and Residual Stresses in LTT Alloys During Welding Using Synchrotron Radiation

  4. No Access

    Book Chapter

    Pages 27-39

    In Situ Scanning Electron Microscopy High Temperature Deformation Experiments to Study Ductility Dip Cracking of Ni–Cr–Fe Alloys

  5. No Access

    Book Chapter

    Pages 41-75

    Grain Nucleation and Growth of Individual Austenite and Ferrite Grains Studied by 3DXRD Microscopy at the ESRF

  6. No Access

    Book Chapter

    Pages 77-83

    Direct Analysis of Solidification-Mode During Welding for the Assessment of Hot-Cracking

  7. No Access

    Book Chapter

    Pages 85-93

    In Situ Synchrotron Study of Inclusions in the Weld Pool for the Assessment of Nucleation Potency of Acicular Ferrite

  8. No Access

    Book Chapter

    Pages 95-111

    Characterization of Solid State Phase Transformation in Continuously Heated and Cooled Ferritic Weld Metal

  9. No Access

    Book Chapter

    Pages 113-131

    In Situ Determination of Phase Transformations and Structural Changes During Non-Equilibrium Material Processing

  10. No Access

    Book Chapter

    Pages 133-148

    In Situ Phase Transformation Studies on a Transformation Induced Plasticity Steel Under Simulated Weld Thermal Cycles Using Synchrotron Diffraction

  11. No Access

    Book Chapter

    Pages 149-158

    Imaging Fast Processes in Liquid Metal Foams and Semi-Solid Alloys Using Synchrotron Radioscopy with Spatio-Temporal Micro-Resolution

  12. No Access

    Book Chapter

    Pages 159-174

    In Situ Measurements for Structural Integrity: An Engineer’s Perspective

  13. No Access

    Book Chapter

    Pages 175-190

    In Situ Neutron Diffraction During Thermo-Mechanically Controlled Process for Low Alloy Steels

  14. No Access

    Book Chapter

    Pages 191-200

    Influence of Plastic Deformation on the Residual Stress Distribution and Fatigue Behaviour of High Strength Steels Welds

  15. Back Matter

    Pages 201-204