Abstract
Based on the experience of implementation of ac and dc automated electric drives (AEDs), important problems of grounding their power, matching with the mains, adjustment, diagnostics, and electromagnetic compatibility are considered. Continuous improvement of the element base for AEDs and automated process control systems (APCSs) with respect to reduction of control power with a sharp increase of the dynamic properties of the elements and growth of the power and number of discrete semiconductor converters, has led to an increase in the ratio between the output power of an AED and the power of its control system up to 1020. Within this framework, the problem of electromagnetic compatibility (EMC) of the AED and APCS elements became acute; i.e., electromagnetic interference signals became commensurable with the variable control signals and caused malfunction of either individual elements or the entire control system. This article presents a number of measures providing EMS of AED elements and shows the experimental values of the intensities of electric and magnetic fields in the area in which the components are located.
Similar content being viewed by others
References
Osipov, O.I. and Ivanov, G.M., The problem of how to choose and to introduce controlled electric drive, Doklady nauchno-prakticheskogo seminara “Reguliruemyi elektroprivod. Opyt i perspektivy primeneniya” (Proc. Sci.-Pract. Seminar “Controlled Electric Drive. Application Experience and Trends”), Moscow: National Research Univ. “MPEI”, 2006, pp. 36–47.
Osipov, O.I., Modern electric drive adjustment: problems and features, Dokl. nauch.-metod. seminara “Metody i sredstva naladki elektroprivoda” (Proc. Sci.— Pract. Seminar “Methods and Means for Adjusting the Electric Drives”), Moscow: National Research Univ. “MPEI”, 2014, pp. 4–11.
Ivanov, G.M., Novikov, V.I., and Osipov, O.I., High technology and energy efficient electromechanical complexes for testing complicated mechanical systems, Izv. Tul’sk. Gos. Univ. Tekhn. Nauki, 2010, issue 3, part 1, pp. 42–46.
Ivanov, G.M., Osipov, O.I., Dronov, A.S., and Kuzin, K.A., Problems and modernizing experience for high voltage synchronous electric drives for pump stations, Izv. Tul’sk. Gos. Univ. Tekhn. Nauki, 2010, issue 3, part 2, pp. 86–95.
Bortsov, Yu.A., Suvorov, G.V., and Shestakov, Yu.S., Eksperimental’noe opredelenie parametrov i chastotnykh kharakteristik avtomatizirovannykh elektroprivodov (The Way to Determine Experimentally Parameters and Frequency Characteristics of Automated Electric Drives), Moscow-Leningrad: Energiya, 1969.
Agafonov, A.N., Orlov, D.A., Osipov, O.I., and Pozdnyakov, V.V., The way to determine experimentally frequency characteristics of electric drive’s elements and systems, Elektrotekhnicheskie sistemy i kompleksy: Mezhvuz. sb. nauch. tr. (Electrotechnical Systems and Complexes. Interuniversity Collection of Scientific Papers), Magnitogorsk: Magnitogorsk State Techn. Univ., 2000, issue 5, pp. 68–71.
Osipov, O.I. and Usynin, Yu.S., Promyshlennye pomekhi i sposoby ikh podavleniya v ventil’nykh elektroprivodakh postoyannogo toka (Man-Made Noises and the Ways to Suppress Them in DC Valve Electric Drives), Moscow: Energiya, 1979.
Osipov, O.I., Kuzin, K.A., Musin, M.D., and Mel’nikov, D.N., Analyzer for electromagnetic fields that take place near electric drive’s elements, in Elektroprivod i sistemy upravleniya: Tr. MEI (Electric Drive and Control Systems. Scientific Works of National Research University “MPEI”), Moscow: National Research Univ. “MPEI”, 2009, issue 685, pp. 29–32.
Panov, A.S., Kutsyi, K.L., and Osipov, O.I., Electromagnetic compatibility of electric drive elements for internal rubber mixer, in Elektrotekhnicheskie sistemy i kompleksy: Mezhvuzovskii sb. nauch. tr. (Electrotechnical Systems and Complexes. Interuniversity Collection of Scientific Papers), Luk’yanov, S.I., Ed., Magnitogorsk: Magnitogorsk State echnical Univ. Named after G.I. Nosov, 2006, issue 13, pp. 7–11.
Panov, A.S., Kutsyi, K.L., and Osipov, O.I., Electromagnetic compatibility of electric drive elements and automated control system for technological process, Trudy V Mezhdunar. (16 Vseros.) konf. po avtomatizirovannomu elektroprivodu (Proc. 5th Int. (16th All-Russian) Conf. on Automated Electric Drive), St. Petersburg, 2007, pp. 450–453.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.I. Osipov, 2015, published in Elektrotekhnika, 2015, No. 1, pp. 13–17.
About this article
Cite this article
Osipov, O.I. Problems of implementation and adjustment of the modern electric drives. Russ. Electr. Engin. 86, 5–8 (2015). https://doi.org/10.3103/S1068371215010101
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371215010101