Abstract
three optical ring resonators for laser inclinometers are investigation. Calculations and comparison of parameters of resonators was perform. As a result, one of them was chosen fully meeting the requirements on dimensions and stability of characteristics that we recommend to use by design of a laser inclinometer of a gyroscopic type.
Similar content being viewed by others
References
Isachenko, V.Kh., Inclinometry of Wells, Moscow: Nedra, 1987, pp. 10, 46.
Bykov, V.P. and Silichev, O.O., Laser Resonators, Moscow: Physmatlit, 2004, pp. 35, 81.
Ishenko, E.F. and Ramazanova, G.S., Analysis of Misaligned Open Optical Resonators, Moscow: MPEI Publishers, 1993, pp. 8, 25, 67.
Badamshina, E.B., Ishenko, E.F., and Lepeshkin, D.V., Method of determining the geometric tolerances of the optical resonator mirrors, Vestnik SPbO Acad. Eng. Sc., 2011, vol. 2, p. 229.
Badamshina, E.B., Criteria for comparison of optical resonators for CAD systems, Vestn. MPEI, 2007, no. 4, p. 109.
Badamshina, E.B., Methods for error compensation of manufacturing optical ring resonators, Cand. Tech. Sc. Thesis, MPEI, 2009, p. 42.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Badamshina, E.B., Ishenko, E.F. & Lepeshkin, D.V. Investigation and comparison of parameters of optical ring resonators for laser inclinometers. Opt. Mem. Neural Networks 24, 54–59 (2015). https://doi.org/10.3103/S1060992X15010063
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1060992X15010063