Abstract
Based on the representative sampling of experimental data and processing of the obtained results, a method of determination of the service life of the instrument for cold sheet s is developed. The method is based on correlation between the magnetic, mechanical and physical-chemical (chemical composition, thermal processing mode, plastic deformation, micro- and macrostress, positioning of dislocations, etc.) properties of the die tool materials.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Kornilova, A.V., Designing a tool of limited life, J. Mach. Manuf. Reliab., 2005, vol. 34, no. 3, p. 66.
Kornilova, A.V., Determination of the durability of tools for the cold die forging of sheet metal according to tribofatics (tribofatigue) criteria, J. Mach. Manuf. Reliab., 2006, vol. 35, no. 2, pp. 158.
Kornilova, A.V., Way to raise longvility of tools for shearing operations, Kuznech.-Shtamp. Proizv. Obrab. Met. Davlen., 2004, no. 11, pp. 18–31.
Kornilova, A.V. and Idarmachev, I.M., Ways to research stamps damages and ways to rise lifetime of stamping tools, Sb. Nauchnykh tr. mezhdunar. nauchno-tekhnich. konf. “Dostizheniya i problemy razvitiya tekhnologii i mashin obrabotki metallov davleniem” (Proc. Sci.-Pract. Conf. “Achievements and Development Problems of Machines and Technologies for Metal Forming”), Kramatorsk, 2013, pp. 265–270.
Kornilova, A.V. and Idarmachev, I.M., Magnetic methods for determining damageability of stamps material for cold sheet stamping, Kuznech.-Shtampov. Proizv. Obrab. Met. Davlen., 2013, no. 3, pp. 35–42.
Karpukhin, I.I., Sil’verstov, I.N., Kornilova, A.V., and Idarmachev, I.M., The way to estimate structures technical state according to microdamages criteria, Chern. Metallurg., 2013, no. 6(1362), pp. 93–98.
Kornilova, A.V., Some approaches to generate a method for choosing the right number of stamps double, Kuznech.-Shtampov. Proizv. Obrab. Met. Davlen., 2006, no. 9, pp. 16–21.
Romanovskii, V.P., Spravochnik po kholodnoi shtampovke (Handbook on Cold Stamping), Leningrad: Mashinostroenie, 1971.
Kornilova, A.V., The way to secure longvility of power elements for compression-type machines and tools, Extended Abstract of Doctoral Sci. (Eng.) Dissertation, Moscow, 2009.
Nerazrushayushchii kontrol’ i diagnostika. Spravochnik (Nondestructive Check and Diagnostics. Handbook), Klyuev, V.V., Ed., Moscow: Mashinostroenie, 1995.
Geller, Yu.A., Pogodin-Alekseev, G.I., and Rakhshtadt, A.G., Metallovedenie (Metal Science), Moscow: Metallurgiya, 1967.
GOST (State Standard) no. 5959-2000: Bars, Bands, and Bundles Made of Tool Alloyed Steel. General Technical Requirements, Moscow: Izd. Standartov, 2000.
Marochnik stali i splavov (Handbook on Steels and Alloys Grades), Zubchenko, A.S., Ed., Moscow: Mashinostroenie, 1977.
Seriya “Mezhdunarodnaya inzhenernaya entsiklopediya.” Mezhdunarodnyi translyator sovremennykh stalei i splavov (Series “International Engineering Encyclopedia.” International Translator for Modern Steels and Alloys), Kirschenbaum, V.S., Ed., Moscow: Mashinostroenie, 1992, vol. 1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Kornilova, I.M. Idarmachev, Tet Paing, Chzho Zayar, 2014, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2014, No. 5, pp. 98–104.
About this article
Cite this article
Kornilova, A.V., Idarmachev, I.M., Paing, T. et al. A method of determination of the service life of a die tool with application of magnetic methods of nondestructive control and diagnostics. J. Mach. Manuf. Reliab. 43, 439–444 (2014). https://doi.org/10.3103/S1052618814050082
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618814050082