Abstract
A production technology for iron-ore materials with improved metallurgical characteristics is developed and tested. The following materials are considered: fluxed pellets containing residual carbon; fluxed local agglomerates from concentrates with a wide range of silica content; local agglomerates with an elevated iron content; local agglomerates with residual carbon; and local agglomerates with both elevated iron content and residual carbon.
Similar content being viewed by others
References
Dvornichenko, I.F., Zhuravlev, F.M., Astaf’ev, V.D., et al., Comparative characteristics of the metallurgical properties of sinter and pellets of different enterprises, Stal’, 1986, no. 10, pp. 21–23.
Zhuravlev, F.M., Lyalyuk, V.P., Lyakhova, I.A., et al., UA Patent 94772, Byull. Izobret., 2014, no. 22.
Zhuravlev, F.M., Lyalyuk, V.P., Lyakhova, I.A., et al., UA Patent 95240, Byull. Izobret., 2014, no. 23.
Zhuravlev, F.M., Lyalyuk, V.P., Lyakhova, I.A., et al., UA Patent 94241, Byull. Izobret., 2014, no. 23.
Zhuravlev, F.M., Lyalyuk, V.P., Uchitel’, A.D., et al., Improvement of production technology of sintering of iron ore pellets with residual carbon, Chern. Metall., 2015, no. 2, pp. 20–26.
Lyalyuk, V.P., Zhuravlev, F.M., Stupnik, N.I., et al., UA Patent 84769, Byull. Izobret., 2013, no. 20.
Lyalyuk, V.P., Zhuravlev, F.M., Stupnik, N.I., et al., UA Patent 85685, Byull. Izobret., 2013, no. 22.
Stupnik, N.I., Zhuravlev, F.M., Lyalyuk, V.P., et al., Development of technological parameters of production of fluxed agglomerated iron ore material for the blast furnace smelting combining the best metallurgical characteristics of sinter and pellets, Vestn. Krivorozhsk. Nats. Univ., 2014, no. 36, pp. 3–9.
Lyalyuk, V.P., Zhuravlev, F.M., Stupnik, N.I., et al., UA Patent 85795, Byull. Izobret., 2013, no. 22.
Zhuravlev, F.M., Lyalyuk, V.P., Lyakhova, I.A., et al., Agglomerated and completely fluxed iron ore material for the blast furnace smelting with the best metallurgical characteristics of sinter and pellets, Chern. Metall., 2015, no. 1, pp. 31–38.
Zhuravlev, F.M., Lyalyuk, V.P., Kassim, D.A., Lyakhova, I.A., and Chuprinov, E.V., Improved iron-ore sinter for blast furnaces, Steel Transl., 2015, vol. 45, no. 4, pp. 270–274.
Zhuravlev, F.M., Lyalyuk, V.P., Lyakhova, I.A., et al., UA Patent 97966, Byull. Izobret., 2015, no. 7.
Zhuravlev, F.M., Lyalyuk, V.P., Kassim, D.A., et al., The production technology of fluxed agglomerated material with the residual carbon for the blast furnace smelting, Vestn. Krivorozhsk. Nats. Univ., 2015, no. 40, pp. 39–44.
Zhuravlev, F.M., Lyalyuk, V.P., Chuprinov, E.V., et al., UA Patent 201608740, 2016.
Savchuk, N.A. and Kurunov, I.S., Domennoe proizvodstvo na rubezhe XXI veka (Blast-Durnace Production at the Turn of 21st Century), Moscow: Chermetinformatsiya, 2000, part 2, appx. 5.
Kurunov, I.S., Sostoyaniya domennogo proizvodstva v mire. Itogi XX veka (the Status of Blast-Furnace Industry in the World: The Results of 20th Century), Moscow: Chermetinformatsiya, 2000.
Butkovska, M., Frohlichova, M., Findorak, R., et al., Influence of charcoal on quality of agglomerate, Acta Metall. Slov., 2014, vol. 4, pp. 9–16.
Kumar, M., Jena, S., and Patel, K., Characterization of properties and reduction behavior of iron ores for application in sponge ironmaking, Miner. Process. Extract. Metall. Rev., 2007, vol. 29, pp. 118–129.
Mandal, A.K. and Sinha, O.P., Characterization of fluxed iron ore pellets as compared to feed material for blast furnace, J. Progr. Res. Chem., 2015, vol. 2, no. 1, pp. 74–82.
Haas, L., Aldinger, J., and Zahl, R., Effectiveness of Organic Binders for Iron Ore Pelletization, Report of Investigations 9230, Washington: U.S. Dep. Interior, 1989, p. 21.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © F.M. Zhuravlev, V.P. Lyalyuk, N.I. Stupnik, E.V. Chuprinov, I.A. Lyakhova, 2016, published in Stal’, 2016, No. 12, pp. 11–17.
About this article
Cite this article
Zhuravlev, F.M., Lyalyuk, V.P., Stupnik, N.I. et al. Improved iron-ore pellets for blast furnaces. Steel Transl. 46, 860–867 (2016). https://doi.org/10.3103/S0967091216120135
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091216120135