Abstract
The shaping of strip-mill rollers is analyzed. Industrial experience with supporting and working rollers of particular shape shows that roller wear is reduced and strip rupture is less frequent. The effectiveness of asymmetric profiling of working rollers is assessed, along with its influence on the edge thickness of the strip.
Similar content being viewed by others
References
Nikolaev, V.A., Profilirovanie i iznosostoikost’ listovykh valkov (Profiling and Wear Resistance of Sheet Rollers), Kiev: Tekhnika, 1992.
Nikolaev, V.A., Improving strip-mill efficiency by roller profiling, Metallurg. Gornorod. Prom., 2007, no. 2, pp. 34–37.
Konovalov, Yu.V., Rudenko, E.A., Grinchuk, P.S., et al., Povyshenie tochnosti prokatki listov i polos More Precise Sheet and Strip Rolling), Kiev: Tekhnika, 1987.
Garber, E.A., Stany kholodnoi prokatki (Cold-Rolling Mills), Moscow–Chernovets: OAO Chermetinformatsiya, 2004.
Stella, F., Carboni, A., Bobich, P., and Farouk, I., Improving the rolling of superthin strip from continuous-cast thin slab, Stal’, 2003, no. 11, pp. 58–65.
Grigoryan, G.G., Zheleznov, Yu.D., Chernyi, V.A., et al., Nastroika, stabilizatsiya i kontrol’ protsessa tonkolistovoi prokatki (Adjustment, Stabilization, and Monitoring of Thin-Sheet Rolling), Moscow: Metallurgiya, 1975.
Polukhin, P.I., Zheleznov, Yu.D., and Polukhin, V.P., Tonkolistovaya prokatka i sluzhba valkov (Thin-Sheet Rolling and Roller Life), Moscow: Metallurgiya, 1967.
Nikolaev, V.A. and Zuchenko, S.V., Formation of roller contact in a four-high cell, Metallurg. Gornorod. Prom., 2010, no. 4, pp. 44–49.
Nikolaev, V.A. and Putnoki, A.Yu., Prokatka shirokopolosnoi stali (Rolling of Broad-Strip Steel), Kiev: Osvita Ukrainy, 2009.
Nikolaev, V.A., Ovcharov, I.G., Simonov, A.I., et al., Roller shaping at the 1680 continuous cold-rolling mill, Chern. Metall.: Byul. Inst. Chermetinform., 1981, no. 5, pp. 57–58.
Klamma, K., CVC technology for cold-rolling mills, Chern. Met., 1984, no. 22, pp. 44–47.
Nikolaev, V.A., Mazur, V.L., and Pilipenko, S.S., USSR Inventor’s Certificate 1119748, Byull. Izobret., 1984, no. 39.
Nikolaev, V.A., Mazur, V.L., Pilipenko, S.S., and Soskovets, O.N., USSR Inventor’s Certificate 1122382, Byull. Izobret., 1984, no. 41.
Nikolaev, V.A., Tekhnologiya prokatki listov i polos (Sheet and Strip Rolling Technology), Kiev: UMK VO, 1990.
Kleckner, J., Bode, T., and Weingarten, L., Russian patent 2391154, 2005.
Nikolaev, V.A and Zhuchenko, S.V., Improving the regulation of the strip cross section in hot rolling, Metallurg. Gornorod. Prom., 2013, no. 2, pp. 39–42.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.A. Nikolaev, 2015, published in “Stal’,” 2015, No. 8, pp. 35–39.
About this article
Cite this article
Nikolaev, V.A. More efficient operation of strip mills. Steel Transl. 45, 593–597 (2015). https://doi.org/10.3103/S0967091215080124
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091215080124