Russian Electrical Engineering

, Volume 79, Issue 12, pp 655–663

Ways to detect single-line-to-ground faults in electricity transmission lines using the location method

  • R. G. Minullin
  • Yu. Ya. Petrushenko
  • I. Sh. Fardiev
  • E. I. Lukin
  • G. V. Lukina
Article

DOI: 10.3103/S106837120812002X

Cite this article as:
Minullin, R.G., Petrushenko, Y.Y., Fardiev, I.S. et al. Russ. Electr. Engin. (2008) 79: 655. doi:10.3103/S106837120812002X
  • 43 Downloads

Abstract

The peculiarities of detection using the location method of single-line-to-ground faults in the electricity transmission lines (ETLs) with 6–35 kV of tree topology and linear structures of 110 kV and higher have been studied. Ways of recognizing reflectograms if there is a fault in the ETL are presented. The investigations were carried out in laboratory settings using ETL models and under real conditions on working ETLs.

Key words

single-line-to-ground faultelectricity transmission lines (ETLs)location method

Copyright information

© Allerton Press, Inc. 2008

Authors and Affiliations

  • R. G. Minullin
  • Yu. Ya. Petrushenko
  • I. Sh. Fardiev
  • E. I. Lukin
  • G. V. Lukina

There are no affiliations available