Erratum to: AAPS PharmSciTech
DOI: 10.1208/s12249-011-9625-y
On page 605 under the “Materials” header, the authors inadvertently noted the glass syringe size as 0.6 mm instead of 6.0 mm: “A Luer Lock glass syringe (BD Hypak, USA), 6.0 mm inner diameter, was filled with 1 mL tested formulation.”
Throughout the paper, megapascal units were inadvertently depicted as “mPa” instead of “MPa” during production. All instances of “mPa” should instead be “MPa.”
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found at http://dx.doi.org/10.1208/s12249-011-9625-y.
Rights and permissions
About this article
Cite this article
Cilurzo, F., Selmin, F., Minghetti, P. et al. Erratum to: Injectability Evaluation: an Open Issue. AAPS PharmSciTech 17, 1508 (2016). https://doi.org/10.1208/s12249-016-0585-0
Published:
Issue Date:
DOI: https://doi.org/10.1208/s12249-016-0585-0