Abstract
This article is devoted to the specific features of the development of compositions and the use of frost-resistant rubbers. The main operating characteristics frost-resistant rubber and the specificity of their use in the Arctic climate are presented.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
E. N. Kablov, “Innovations of VIAM as part of implementing the Strategic Directions of Development of Materials and Technologies of Their Processing for the Period up to 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015).
V. M. Buznik, E. N. Kablov, and A. A. Koshurina, “Materials for complex technical devices intended to be used under Arctic conditions,” in Scientific and Technical Problems of Arctic Exploration (Nauka, Moscow, 2015), pp. 275–285 [in Russian].
E. N. Kablov, “Modern materials–the basis of innovative modernization of Russia,” Met. Evrazii, No. 3, 10–15 (2012).
Big Handbook of Tinman (OOO Izd. tsentr Tekhinform, Moscow, 2012) [in Russian].
Rubber Technology: Compounding and Testing for Performance, Ed. by J. S. Dick (Carl Hanser Verlag GmbH & Co, 2009), 2nd ed.
O. A. Eliseev, L. L. Krasnov, E. I. Zaitseva, and A. V. Savenkova, “Processing and modification of elastomeric materials in all climatic conditions,” Aviats. Mater. Tekhnol., No. S, 309–314 (2012).
Seals and Sealing Equipment. Handbook, Ed. by A. I. Golubev and L. A. Kondakov (Mashinostroenie, Moscow, 1986) [in Russian].
F. A. Makhlis and D. L. Fedyukin, Terminology Handbook for Rubber (Khimiya, Moscow, 1989) [in Russian].
Fedyukin, D.L. and Makhlis, F.A., Technical and Technological Properties of Rubbers, (Khimiya, Moscow, 1985) [in Russian].
A. E. Kornev, A. M. Bukanov, and O. N. Sheverdyaev, Technology of Elastomeric Materials (NPPA Istek, Moscow, 2009) [in Russian].
M. L. Davydova and M. D. Sokolova, “Prospective technological method for obtaining polymer elastomeric materials,” Vopr. Materialoved., No. 3 (75), 41–47 (2013).
OST (Industry Standard) 190094–79: Polymeric Materials. Method for Determining the Flammability of Decorative- Finishing and Structural Polymeric Materials.
Z. N. Nudel’man, Fluoroelastomers: Fundamentals, Processing and Application (OOO PIF RIAS, Moscow, 2007) [in Russian].
Z. N. Nudel’man, “About anti-cold fluoroelastomers,” Kauch. Rezina, No. 1, 8–10 (2005).
M. Shetts, Silicone Rubber (Khimiya, Leningrad, 1975) [in Russian].
A. M. Chaikun, O. A. Eliseev, I. S. Naumov, and M. A. Venediktova, “Features of the construction of recipes for cold-resistant resins,” Aviats. Mater. Tekhnol., No. 3, 53–55 (2012).
A. M. Chaikun, O. A. Eliseev, I. S. Naumov, and M. A. Venediktova, “Features of cold-resistant rubbers based on various natural rubbers,” Tr. VIAM, No. 12 (2013). http://www.viam-works.ru.
M. D. Sokolova, “Development of cold-resistant sealing rubbers based on nitrile butadiene natural rubber for the north equipment,” Extended Abstract of Candidate’s Dissertation in Engineering (YaNTs SO RAN, Yakutsk, 1998).
E. N. Petrova and M. D. Sokolova, “Frost-resistant elastomeric materials for extreme conditions,” Kauch. Rezina, No. 5, 11–14 (2003).
V. V. Portnyagina, “Development of sealing rubbers based on cold-resistant natural rubbers and ultrafine fillers for the north equipment,” Extended Abstract of Candidate’s Dissertation in Engineering (MITKhT im.M.V. Lomonosova, Moscow, 2010) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.M. Chaikun, I.S. Naumov, A.P. Petrova, 2016, published in Vse Materialy, 2016, No. 5, pp. 13–22.
Rights and permissions
About this article
Cite this article
Chaikun, A.M., Naumov, I.S. & Petrova, A.P. On the possibility of using rubbers in Arctic conditions. Polym. Sci. Ser. D 9, 415–421 (2016). https://doi.org/10.1134/S1995421216040055
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421216040055